File kernel-adaptation-dm3730.yaml of Package kernel-adaptation-dm3730

# See: http://wiki.merproject.org/wiki/Adaptation_Guide/Step_by_step 
# for documentation of this file.

Name: kernel-adaptation-dm3730
# The text following "kernel-adaptation-" is put into the
# %{kernel_target_hw} macro by the .spec file. Typically
# you make an OBS package called kernel-adaptation-<devicecodename>

Summary: Kernel Adaptation %{kernel_target_hw}
Description: Kernel for %{kernel_target_hw}.

# The Version: is used in paths and must match the version 
# used in the src "make install" - it's also used for the
# tarball name
Version: 3.4.7
Release: 1
Group: Kernel/Linux Kernel
License: GPLv2
Configure: none
Builder: none

Macros:
     # Set these values based on the features in your own adaptation.
     #- builds_vmlinuz;1
     - builds_uImage;1
     - builds_firmware;0

#URL: not required but useful to identify where the source can be found.

RequiresPost:
     # We are running depmod in the post thus this requirement
     - kmod >= 9

PkgConfigBR:
# ncurses is useful if you chroot into the kernel build area and want
#  "make menuconfig"
     - "ncurses"

# When available the kernel-check-mer package will be used to validate
#the .config
PkgBR:
    # In case your adaptation uses uImages for booting you need to include
    # u-boot-tools package from your adaptation to kernel build.
    # - "u-boot-sample-tools"
    - "mer-kernel-checks"
    # depmod is used when building the kernel by toplevel Makefile 
    # that calls scripts/depmod.sh
    - kmod >= 9
    # Perl is used to modify EXTRAVERSION in kernel config
    - perl 
    # mkimage is needed to build uImage
    - uboot-mkimage

Sources:
    - kernel-adaptation-dm3730-3.4.7.tar.bz2
    - "%{name}.config"

# Insert any Patches: section here
Patches:
    - 0001-smsc911x-added-fixed-regulators.patch
    - 0002-usb-host-excluded-some-mux_inits-for-medistream.patch
    - 0003-mach-omap2-added-medistream-board.patch
    - 0004-displays-added-panel-for-medistream.patch
    - 0005-sound-using-omap3evm-sound-soc-for-medistream.patch
    - 0006-musb-selecting-NOP_USB_XCEIV-for-medistream.patch
    - 0007-omap_vout-removed-omapvid_init-calls-that-led-to-seg.patch
    - 0008-smsc911x-using-MAC-address-from-kernel-commandline.patch
    - 0010-uncompress-setting-UART3-for-early-console-messages.patch
    - 0012-board-medistream-added-omap3_camera_init-to-get-ISP-.patch
    - 0013-smsc911x-decreased-TX-fifo-size-to-4KB.patch
    - 0014-sound-fixed-micbias-register-for-twl4030.patch
    - 0015-sound-enabled-microphone-on-omap3evm-soc.patch
    - 0016-medistream-setting-dpll2-clock-to-460MHz-for-DSP.patch
    - 0017-logo-added-bewatec-logo.patch
    - 0018-smsc911x-fixed-buffer-overflow-when-setting-mac-addr.patch
    - 0019-mfd-fixed-unnecessary-boot-error-message.patch
    - 0020-omap_vout-forcing-video-layer-to-overlay1.patch
    - 0021-video-omap2-skipping-clearing-of-framebuffer.patch
    - 0022-board-medistream-added-parameter-to-skip-framebuffer.patch
    - 0023-fixed-DSP-clock-frequency.patch
    - 0024-smsc911x-removed-spinlocks.patch
    - 0025-initializing-mpu-rate-in-opp-modes.patch
    - 0026-pmon-enabled-userspace-access-to-performance-counter.patch
    - 0027-perftool-fixed-compile-bug.patch
    - 0028-board-medistream-fixed-USB-phy-reset.patch
    - 0029-board-medistream-fixed-usb-hub-reset.patch
    - 0030-board-mediastream-added-arm-mach-type.patch

Provides:
    - "kernel = %{kernel_version}"

Files:
    - "/lib/modules/%{kernel_version_build}/*"
    - "/boot/System.map-%{kernel_version_build}"
    - "/boot/config-%{kernel_version_build}"
 
SubPackages:
    - Name: devel
      Summary: Devel files for %{kernel_target_hw} kernel
      Group: Development/System
      Description: |
          Devel for %{kernel_target_hw} kernel
      Provides:
          - "kernel-devel = %{kernel_version}"
      Files:
          - "/%{_prefix}/src/kernels/%{kernel_version_build}/*"
          - "/%{_prefix}/src/kernels/%{kernel_version_build}/.config"