File _service:tar_git:mce.changes of Package mce

* Fri Apr 08 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.5
- [settings] Do not use hardcoded key names. MER#1554
- [settings] Improve key name documentation. MER#1554
- [settings] Remove gconf references from code. Fixes MER#1554
- [settings] Remove gconf references from interface function names. MER#1554
- [settings] Remove gconf references from key names. MER#1554
- [settings] Remove unused debug data. MER#1554
- [settings] Rename mce-gconf module to mce-setting. MER#1554
- [settings] Use mce-setting module. MER#1554

* Mon Mar 21 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.4
- [display] Act on lpm-off delay changes. Fixes JB#34618

* Mon Mar 21 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.3
- [event-input] Enable doubletap emulation by default. Fixes JB#34610

* Fri Mar 18 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.2
- [event-input] Do not emulate doubletap during display power down. Fixes JB#34549
- [leds] Disable DisplayDimmed led pattern by default. Fixes JB#34543

* Sat Mar 12 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.1
- [display] Use disable-blanking-from-lockscreen setting. MER#1542
- [mcetool] Add dimming demo mode. Fixes MER#1542

* Tue Mar 08 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.79.0
- [powerkey] Add enablers for configuring touchscreen gestures. Fixes MER#1537

* Mon Feb 15 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.78.4
- [callstate] Map ofono waiting state to mce ringing state. Fixes JB#31908

* Thu Feb 04 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.78.3
- [display] Power up display on entry to OS update mode. Fixes JB#34088

* Wed Jan 27 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.78.2
- [datapipe] Do not assume audio jack is connected. JB#33997
- [evdev] Update switch states when input device is added. JB#33997
- [tklock] Do not turn display on due to initial jack sense state. Fixes JB#33997

* Tue Jan 19 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.78.1
- [display] Force frame buffer power up in logical off state. JB#33873
- [display] Start ui before ramping up display backlight. JB#33873
- [touch] Use sw double taps based on input policy state. Fixes JB#33873

* Fri Jan 08 2016 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.78.0
- [datapipe] Add datapipe for tracking finger-on-screen state. JB#33644
- [input] Add setting to allow/deny input device grabbing. JB#33644
- [iomon] Provide context pointer for iomon callbacks. JB#33644
- [touch] Add handler for multitouch protocol A and B. JB#33644
- [touch] Grab touch input based on touch_detected_pipe. JB#33644
- [touch] Remove old double tap emulation code. JB#33644
- [touch] Use multitouch module for double tap emulation. JB#33644
- [touch] Use multitouch module to feed touch_detected_pipe. JB#33644

* Wed Dec 09 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.77.1
- [evdev] Add event names to lookup tables. Fixes JB#33666

* Wed Dec 09 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.77.0
- [evdev_trace] Identify processes that have input devices open. Fixes JB#33642

* Wed Dec 02 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.5
- [evdev] Add event names to lookup tables. Fixes JB#33636

* Tue Dec 01 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.4
- [led] Skip disabling Reno on supported kernels
- [led] Skip disabling Reno on supported kernels for N9/N950. Fixes MER#1434

* Wed Nov 25 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.3
- [worker] Fix job queue related memory leaks. Fixes MER#1429

* Fri Nov 13 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.2
- [display] Tune suspend after active use delays. Fixes JB#33366

* Thu Nov 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.1
- [display] Change built-in default dim timeouts. Fixes JB#33492

* Thu Nov 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.76.0
- [tklock] Add setting for lid is closed als limit. Fixes JB#33468

* Wed Nov 11 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.75.0
- [display] Offload fbdev ioctl to the worker thread. Fixes JB#32840
- [worker] Add interface for handling blocking tasks asynchronously. Contributes to JB#32840
- [worker] Check worker thread sanity periodically. Contributes to JB#32840

* Tue Nov 10 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.74.2
- [led] Do not log pattern details when evaluating active pattern. Fixes MER#1412

* Wed Nov 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.74.1
- [dbus] Allow user processes to call reset_config method. Fixes MER#1406

* Wed Nov 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.74.0
- [dbus] Move dbus_any_t union declaration to mce-dbus.h
- [display] Add D-Bus method for obtaining display state statistics. Fixes MER#1401
- [display] Make display state enume start from zero. Contributes to MER#1401
- [makefile] Cleanup development time temporary files from tools subdir too
- [mcetool] Add dbus helpers. Contributes to MER#1401

* Tue Nov 03 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.5
- [tklock] Disable state restore on start of noanim blanking policy. Fixes MER#1399

* Tue Nov 03 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.4
- [dbus] Add configuration for get_suspend_stats method call. Fixes MER#1398

* Thu Oct 29 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.3
- [alarm] Fix typo in diagnostic message
- [alarm] Hold wakelock while expecting alarm ui startup. Fixes JB#33008
- [alarm] Remove D-Bus monitor callbacks on plugin unload
- [alarm] Switch indentation to 4 spaces instead of tabs

* Mon Oct 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.2
- [als] Add datapipe for temporarily enabling ALS. Contributes to JB#32278
- [als] Reorganize als plugin code
- [als] Switch to array based datapipe init
- [tklock] Reimplement lid sensor based blanking policy. Fixes JB#32278

* Wed Oct 14 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.1
- [display] Enable autosleep when powering off display. Fixes JB#32356
- [suspend] Add support for enabling autosleep. Contributes to JB#32356

* Fri Oct 09 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.73.0
- [callstate] Suspend proof delayed call state evaluation. Fixes JB#32462
- [dbus] Block suspend also during method calls that bypasses mce-dbus. Contributes to JB#32462
- [dbus] Block suspend while making D-Bus method calls. Contributes to JB#32462
- [dbus] Block suspend while sending or dispatching D-Bus messages. Contributes to JB#32462
- [wakelock] Add module for virtual wakelocks. Contributes to JB#32462
- [wltimer] Add moduled for suspend blocking timers. Contributes to JB#32462

* Wed Oct 07 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.72.0
- [led] Add support for always breathing CSD LED pattern. Fixes JB#32696

* Tue Oct 06 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.71.2
- [powerkey] Do not bypass lockscreen if proximity sensor is covered. Fixes JB#32668

* Mon Oct 05 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.71.1
- [led] Relax on/off limits for sw breathing. Contributes to JB#31184

* Fri Oct 02 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.71.0
- [dbus] Allow adjusting mce verbosity while it is running. Fixes JB#32492
- [dbus] Tune error recovery paths

* Thu Oct 01 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.70.0
- [tklock] Add setting for tweaking volume key input policy. Contributes to JB#31567

* Wed Sep 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.69.0
- [tklock] Add setting for disabling unblank to lockscreen animation. Contributes to JB#30849

* Wed Sep 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.68.0
- [display] Add setting for dim timeout with hw keyboard available. Fixes MER#1321
- [display] Move code / constants to more logical place
- [display] Refactor adaptive dimming handling. Contributes to MER#1321

* Wed Sep 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.67.0
- [keypad] Add support for simple user-defined keyboard backlight. Fixes MER#1349.

* Tue Sep 29 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.66.0
- [build] Remove no-break spaces form debian changelog
- [display] Add missing prototypes and fix function name prefix
- [display] Add setting for kbd slide inhibit mode. Contributes to MER#1321
- [tklock] Add settings for tuning keyboard slide open/close policy. Contibutes to MER#1321

* Tue Sep 22 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.65.0
- [dbus] Add method for querying uptime and suspend time. Fixes JB#31310
- [lib] Add utilities for getting 64-bit time stamps. Contibutes to JB#31310

* Fri Sep 18 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.64.0
- [orientation] Add options for tweaking orientation sensor usage. Fixes MER#1331

* Fri Sep 18 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.5
- [callstate] Do not second guess call state requested by dbus clients. Contibutes to JB#32373
- [callstate] Give "ringing" call state priority over "active". Fixes JB#32373

* Thu Sep 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.4
- [usbmode] Do not report unknown usb modes in default verbosity. Fixes JB#32296

* Thu Sep 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.3
- [tklock] Show device unlock view if tklock removal must be denied. Fixes MER#1324

* Wed Sep 16 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.2
- [callstate] Allow multiple D-Bus clients to set call state. Fixes JB#32301

* Mon Sep 14 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.1
- [packaging] Update mce-dev dependency. Contributes to MER#1310
- [powerkey] Add missing include file. Contributes to MER#1310
- [powerkey] Use powerkey event constants instead of hardcoded values. Contributes to MER#1310

* Thu Sep 10 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.63.0
- [powerkey] Add "vibrate" power key action. Contribues to JB#24488
- [powerkey] Vibrate when locking device via double powerkey press. Fixes JB#24488

* Mon Sep 07 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.6
- [dsme] Move dsme signal handling to mce-dsme module. Fixes JB#28901
- [dsme] Refactor mce-dsme module.Contributes to JB#28901

* Sat Sep 05 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.5
- [cleanup] Remove unused filter-brightness-simple plugin. Fixes MER#1290
- [cleanup] Remove unused median_filter module. Contributes to MER#1290

* Fri Sep 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.4
- [cleanup] Remove tests scripts that are not needed or do not work. Fixes MER#1289

* Thu Sep 03 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.3
- [datapipe] Allow array based setup to install filter callbacks. Contributes to JB#31927
- [inactivity] Block suspend during inactivity broadcast. Fixes JB#31927
- [inactivity] Refactor inactivity module. Contributes to JB#31927
- [inactivity] Tune debug logging. Contributes to JB#31927
- [inactivity] Use heartbeat timer to enter inactive state. Contributes to JB#31927

* Thu Aug 27 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.2
- [tklock] Do not disable double tap if lid close has been ignored. Fixes JB#31794

* Thu Aug 27 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.1
- [evdev_trace] Swap --trace and --identify.
- [evdev_trace] Use line buffered mode for stdout. Fixes JB#31852
- [evdev_trace] Use line buffered mode for stdout. Fixes JB#31852

* Thu Aug 20 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.62.0
- [osupdate] Collect system logs while OS update takes place. Fixes JB#31632

* Wed Aug 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.61.0
- [tklock] Add setting to disable input device grabbing. Fixes MER#1250

* Mon Aug 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.60.1
- [activity] Allow both monotonic and realtime input event time stamps. Fixes JB#31540

* Tue Aug 11 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.60.0
- [display] Add configurable dimming settings. Contributes to JB#31214

* Thu Aug 06 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.59.1
- [tklock] Tune notification display blanking policy. Fixes JB#31213

* Wed Aug 05 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.59.0
- [proximity] Optionally make proximity sensor behave like lid sensor. Fixes MER#1201
- [tklock] Add setting for lid open/close actions. Fixes MER#1202

* Mon Aug 03 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.58.1
- [lid sensor] Evaluate input enable/disable on sensor change. Contributes to JB#31205
- [touchscreen] Improve end of touch detection. Fixes JB#31205
- [touchscreen] Unify touch event value evaluation

* Fri Jul 31 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.58.0
- [doubletap] Disable double tap detection when lid is closed. Contributes to JB#27807

* Fri Jul 31 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.57.0
- [display] Add setting for blanking pause mode. Fixes JB#27486

* Thu Jul 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.56.3
- [callstate] Allow simulating also outgoing calls. Fixes JB#30160
- [callstate] Tune diagnostic logging and other minor fixes

* Tue Jul 28 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.56.2
- [mce] Improve touch detection logic used in blanking policy handling. Fixes JB#30661

* Tue Jul 07 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.56.1
- [mce] Handle invalid session id from sensorfwd correctly. Fixes JB#30488

* Wed Jun 24 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.56.0
- [mce] Add org.nemomobile.compositor D-Bus config. Contributes to JB#29194

* Tue Jun 23 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.55.3
- [mce] Make display blank faster after dismissing an alarm. Fixes JB#28552

* Tue Jun 23 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.55.2
- [mce] Explicitly allow/deny als based brightness tuning. Fixes JB#30090
- [mce] Reset als history after enabling the sensor. Contributes to JB#30090

* Thu Jun 18 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.55.1
- [mce] Assume lid sensor is broken until closed to open transition is seen. Fixes JB#30038

* Thu Jun 18 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.55.0
- [mce] Expose active blanking policy on D-Bus. Fixes JB#29675

* Thu Jun 18 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.54.2
- [mce] Use hbtimer for led pattern auto-deactivation. Fixes JB#29180

* Wed Jun 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.54.1
- [mce] Improve handling of sensorfw related ipc failures. Fixes JB#29283

* Tue Jun 16 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.54.0
- [mce] Allow fine tuning ALS usage via mce settings. Fixes JB#29892

* Tue Jun 16 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.53.0
- [mce] Assume lid sensor is broken until it has been switch to open position. Contributes to JB#29011
- [mce] Make lid sensor policy work similarly to proximity sensor. Fixes JB#29011
- [mce] Provide separate datapipes for raw and filtered ALS data. Contributes to JB#29011
- [mce] Reset lid-sensor-is-working status on triple powerkey press. Contributes to JB#29011
- [mce] Use ambient light to avoid false positives with magnetic cover sensors. Contributes to JB#29011

* Fri Jun 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.52.0
- [mce] Allow keyboard input device to get slider state from another input device. Fixes MER#1100

* Fri Jun 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.10
- [mce] Start dim timer also when blanking pause period ends due to timeout. Fixes JB#29826

* Thu Jun 11 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.9
- [mce] Fixes to diagnostic logging from powerkey handler. Fixes JB#29793
- [mce] Remove defunct demo-mode dbus method call handler. Fixes JB#29791

* Thu Jun 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.8
- [mce] Do not allow re-entry to display state machine execution. Fixes JB#29539

* Tue Jun 02 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.7
- [mce] Omit diagnostic logging about missing battery info on shutdown. Fixes JB#26375

* Tue Jun 02 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.6
- [mce] Ignore EV_REP event types when probing volume key devices. Fixes JB#29282

* Mon Jun 01 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.5
- [mce] Allow volume keys to be used in the lock screen. Fixes JB#22688

* Mon Jun 01 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.4
- [mce] Ignore stay on/dim blanking inhibit modes in actdead state. Fixes JB#28966

* Fri May 29 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.3
- [mce] Do not activate lockscreen during display power down. Contributes to JB#29213
- [mce] Grab touch input without delay when leaving powered up display states. Contributes to JB#29213
- [mce] Make it easier to tell apart lockscreen view from lpm ui states. Fixes JB#29213
- [mce] Send display off signal when starting display power down. Contributes to JB#29213
- [mce] Wait a bit longer before panicking about unresponsive compositor. Contributes to JB#29213

* Thu May 21 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.2
- [mce] Avoid blocking read from iphb socket. Fixes JB#28990

* Thu May 21 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.1
- [mce] allow policy for blanking states. Contributes to JB#28929

* Wed May 20 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.51.0
- [mce] Expose active blanking inhibit on D-Bus. Fixes JB#28929
- [mce] Expose active blanking pause on D-Bus. Contributes to JB#28929

* Tue May 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.50.0
- [mce] Implement iphb based timers for use from within mce. Contributes to JB#28706
- [mce] Wakeup from suspend to end autolock grace period. Fixes JB#28706

* Wed May 13 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.49.0
- [mce] Add mcetool option for enabling/disabling led patterns. Fixes JB#27425
- [mce] Add settings for exceptional display on state durations. Fixes JB#27426
- [mce] Allow returning to dim after exceptional display on. Fixes JB#27428
- [mce] Block user interaction when shutdown/reboot starts. Fixes JB#26533
- [mce] Demote mce proximity logging to debug. Fixes JB#28749
- [mce] Do not enforce tklock removal while lipstick is running. Fixes JB#28746

* Tue May 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.48.4
- [mce] Cap automatic blanking timeouts in act dead mode. Fixes JB#28709

* Tue May 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.48.3
- [mce] Always send indication after display state change is requested over D-Bus. Fixes JB#28558

* Mon May 11 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.48.2
- [mce] Fix after boot blank delay handling. Fixes JB#26524

* Thu May 07 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.48.1
- [mce] Tweak backlight control path configuration. Fixes MER#977

* Tue May 05 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.48.0
- [mce] Add setting for enabling/disabling orientation sensor use. Fixes JB#27427

* Tue Apr 28 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.47.0
- [mce] Add setting for ignoring lid/cover sensor. Fixes JB#28108

* Thu Mar 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.46.1
- [mce] Do not cancel display state restore when tklock or devicelock is applied. Fixes JB#21182
- [mce] Refactor proximity & autolock state machines. Contributes to JB#21182

* Tue Mar 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.46.0
- [mce] Add setting for autolock delay length. Fixes NEMO#787

* Sun Mar 15 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.45.0
- [mce] Add option to ignore tklock removal while device lock is active. Fixes JB#26525

* Sun Mar 15 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.44.0
- [mce] Remove legacy ambient light sensor logic. Contributes to JB#27286
- [mce] Remove legacy proximity sensor logic. Contributes to JB#27286
- [mce] Using sensorfw for ambient light / proximity sensor control is not optional. Fixes JB#27286

* Sun Mar 15 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.7
- [mce] Remove stale l10n code and data. Fixes NEMO#721

* Sat Mar 14 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.6
- [mce] Add SW_LID to list of events MCE is interested in. Fixes NEMO#797
- [mce] Remove SoftOff mode. Fixes JB#27285

* Fri Mar 13 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.5
- [mce] Remove unused mce.ini configuration items. Fixes JB#25531

* Fri Mar 13 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.4
- [mce] Handle statefs Battery.State = "low" correctly. Fixes JB#27079

* Wed Mar 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.3
- [mce] Stop mce fbdev child process from dumping cores on shutdown. Fixes JB#26832

* Tue Mar 03 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.2
- [mce] Improve diagnostic logging from cpu-keepalive plugin. Fixes JB#24905

* Fri Feb 20 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.1
- [mce] Interpret BTN_TOUCH event with zero value as touch release. Fixes JB#26630

* Fri Feb 20 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.43.0
- [mce] Do not use hardcoded defaults for display plugin settings. Contributes to JB#26550
- [mce] Make all blanking timeouts separately configurable. Fixes JB#26550
- [mce] Provide fallback values dim timeouts setting and track changes. Contributes to JB#26550
- [mce] Use mce_gconf_track_xxx() helpers in display plugin. Contributes to JB#26550

* Tue Feb 17 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.42.0
- [mce] Add dbus method for requesting settings reset. Fixes JB#24286

* Fri Feb 13 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.7
- [mce] Do not attempt to reconnect if dsme socket connection is closed. Fixes JB#26373

* Thu Feb 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.6
- [mce] Assume power key event from touch input device is double tap. Fixes JB#26465

* Thu Feb 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.5
- [mce] Use target display state to determine updates allowed state. Fixes JB#26377

* Tue Feb 10 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.4
- [mce] Move fbdev control from display plugin to separate mce-fbdev module. Fixes JB#26215

* Fri Feb 06 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.3
- [mce] Increase the amount of configurable power key dbus actions to six. Fixes NEMO#781

* Wed Feb 04 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.2
- [mce] Stop initial orientation reporting from triggering flip over gestures. Fixes NEMO#786

* Fri Jan 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.1
- [mce] Make touch input blocking by proximity sensor optional. Fixes JB#25467

* Fri Jan 30 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.41.0
- [mce] Avoid display brightness tuning due to shortlived ALS noise. Fixes JB#25463
- [mce] Implement median filtering for ALS data

* Wed Jan 28 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.40.1
- [mce] Add support for constant velocity brightness changes. Fixes JB#25458

* Tue Jan 27 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.40.0
- [mce] Add plugin for tracking battery state via statefs. Contributes to JB#6273
- [mce] Get battery data from statefs. Fixes JB#6273

* Fri Jan 23 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.39.4
- [mce] Fix USB cable connection related issues in display blanking policy. Fixes JB#25788

* Mon Jan 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.39.3
- [mce] Do query voice calls until required dbus interface is available. Fixes JB#24719

* Mon Jan 19 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.39.2
- [mce] Do not generate activity from sensor evdev nodes. Fixes JB#25420
- [mce] Fix end-of-touch detection for double tap emulation. Fixes JB#25699

* Fri Jan 16 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.39.1
- [mce] Assume proximity covered while waiting for sensord to start up. Fixes: JB#25575

* Mon Jan 12 2015 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.39.0
- [mce] Allow attaching of context specific user data to mce io monitors
- [mce] Refactor mce io monitor interface
- [mce] Signal hw keyboard availability state over D-Bus System Bus. Fixes JB#25232
- [mce] Signal slide in keypad state over D-Bus System Bus

* Fri Dec 19 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.38.1
- [mce] Allow user processes to query current memory level over D-Bus. Fixes JB#24382
- [mce] Do not reject all of memnotify input if unknown data is found from it. Fixes JB#24908

* Thu Dec 18 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.38.0
- [mce] Add enablers for evdev event mapping
- [mce] Make keypad slide policies work again. Fixes JB#24391

* Fri Dec 12 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.37.4
- [mce] Improvements to sensor state handling when sensord is not available. Fixes JB#24910

* Thu Dec 04 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.37.3
- [mce] Do not autolock when device lock is applied due to lipstick startup. Fixes JB#24842

* Tue Nov 11 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.37.2
- [mce] Block late suspend briefly when call state changes. Fixes JB#23614

* Fri Oct 31 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.37.1
- [mce] Consider "undefined" device lock state equal to "unlocked". Fixes JB#24138

* Wed Oct 29 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.37.0
- [mce] Do not broadcast intermediate tklock changes over D-Bus
- [mce] Make unblank and unlock via double tap work again
- [mce] Re-evaluate autolock if device wakes up from suspend
- [mce] Rewrite powerkey handler to allow more flexible configuration. Fixes JB#23653
- [mce] Set tklock if devicelock gets applied immediately after unblanking

* Tue Oct 14 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.6
- [mce] Provide transition duration for ui side dimming. Contributes to JB#18412

* Wed Oct 01 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.5
- [mce] Do not activate zero length exceptional display on linger state. Fixes JB#23267

* Tue Sep 30 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.4
- [mce] Wait for fade-to-black to finish before stopping display updates. Fixes JB#21833

* Fri Sep 26 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.3
- [mce] Work around erroneous initial brightness reporting. Fixes JB#23138

* Fri Sep 19 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.2
- [mce] Cancel display state restore if devicelock state changes. Fixes JB#22743

* Fri Sep 19 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.1
- [mce] Expect tklock changes during calls. Fixes JB#20739

* Wed Sep 10 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.36.0
- [mce] Add "proximity2" power key action mode
- [mce] Allow bypassing stuck proximity sensor via multiple power button presses
- [mce] Do not release touch input blocking while proximity sensor is covered. Fixes JB#22587

* Wed Sep 03 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.35.0
- [mce] Add memnotify plugin for signaling memory pressure level changes. Fixes JB#22490

* Tue Sep 02 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.34.2
- [mce] Fix minor memory leaks and remove blocking dbus calls. Fixes JB#22450

* Thu Aug 28 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.34.1
- [mce] Check logging verbosity before evaluating format parameters. Fixes JB#22310
- [mce] Rewrite mce-sensorfw module so that it does not use blocking dbus calls. Fixes JB#17747

* Tue Aug 19 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.34.0
- [mce] Add enablers for ui side dimming. Fixes JB#21683
- [mce] Delay returning to suspend if woken up by rtc alarm. Fixes JB#21702
- [mce] Make MCE introspectable over D-Bus. Fixes JB#21034
- [mce] Register display plugin dbus handlers earlier. Fixes JB#22091

* Thu Aug 14 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.5
- [mce] Add setting for selecting automatic lpm ui triggering modes. Fixes JB#20959
- [mce] Allow going to lpm mode when display off request is made over D-Bus. Fixes JB#21918
- [mce] Do not allow transient/invalid display state targets. Fixes JB#21994

* Tue Aug 12 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.4
- [mce] Do not use lpm display mode by default. Contributes to JB#21920

* Fri Aug 08 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.3
- [mce] Add support for hammerhead magnetic lid sensor. Fixes JB#21639

* Fri Aug 08 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.2
- [mce] Do not enable led sw breathing if current led backend does not support it. Contributes to JB#21845
- [mce] Improve upower battery device detection. Fixes JB#21849

* Wed Aug 06 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.1
- [mce] Add support for fixed time brightness fading. Fixes JB#21713

* Tue Aug 05 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.33.0
- [mce] Allow blanking via lpm when powerkey is pressed
- [mce] Implement dbus method for requesting display lpm state. Fixes JB#20906
- [mce] Timer based blanking from lock screen happens via lpm state

* Fri Aug 01 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.6
- [mce] Send lpm state notification on mce startup. Fixes JB#19402

* Fri Aug 01 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.5
- [mce] Add logic for detecting hammerhead volume key input device. Fixes JB#21638
- [mce] Use last known lux value for all automatic brightness controls. Fixes JB#20910

* Wed Jul 30 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.4
- [mce] Use last known lux value for all automatic brightness controls. Fixes NB#20910

* Fri Jun 27 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.3
- [mce] Do not assume lipstick D-Bus service can handle compositor interface. Fixes JB#19572

* Wed Jun 25 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.2
- [mce] Package legacy configuration items separately. Fixes NEMO#616

* Mon Jun 23 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.1
- [mce] Adjust display linger times after ending a call. Fixes JB#20810
- [mce] Keep frame buffer device opened to keep display from powering off. Fixes JB#14341

* Wed Jun 18 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.32.0
- [mce] Do not required dsme to be running when mce starts up. Fixes JB#11581

* Tue Jun 17 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.9
- [mce] Suppress warnings about missing led configuration toggles. Fixes JB#20539

* Tue Jun 17 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.8
- [mce] Update power up brightness when starting display state transition. Fixes JB#20590

* Fri Jun 13 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.7
- [mce] Cancel lpm mode if tklock is removed. Fixes JB#20383
- [mce] Keep display on and block suspend when os update is in progress. Fixes JB#14675

* Fri Jun 06 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.6
- [mce] Make lpm display mode follow the brightness setting in manual mode. Fixes JB#20227

* Thu Jun 05 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.5
- [mce] Tune led brightness configuration. Fixes JB#20149

* Thu Jun 05 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.4
- [mce] Fix doubletap handling when powering up display to LPM_ON state. Fixes JB#19862

* Wed Jun 04 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.3
- [mce] Assume lpm display mode is supported. Fixes JB#19608
- [mce] Make double tap simulation less picky about multitouch reporting details. Fixes JB#19916
- [mce] Shorten default touch unblock delay and make it configurable. Fixes JB#19833

* Tue Jun 03 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.2
- [mce] Control led brightness and color separately. Fixes JB#19788

* Fri May 30 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.1
- [mce] Power up display if suspend policy gets disabled. Fixes JB#20080

* Fri May 30 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.31.0
- [mce] Allow using compositor service that is not lipstick. Fixes JB#19566

* Tue May 27 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.6
- [mce] Move datapipes variables from mce.h to datapipe.c. Fixes JB#18917

* Thu May 22 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.5
- [mce] Drop gconf-2 build dependency. Fixes JB#19487

* Thu May 15 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.4
- [mce] Enable use_low_power_mode setting by default. Fixes JB#19484

* Wed May 14 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.3
- [mce] Enable led sw breathing by default when charger is connected. Fixes JB#19431
- [mce] Use ambient light sensor to tune display brightness in lpm_on state. Fixes JB#18791

* Tue May 13 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.2
- [mce] Fix white space issues in mce code base. Fixes JB#18915
- [mce] Use mce-command-line for parsing mcetool command line options. Fixes JB#18916

* Fri May 09 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.1
- [mce] Disable automatic dimming/blanking during incoming call. Fixes JB#19194
- [mce] Enter display off state after dimming. Fixes JB#19192

* Thu May 08 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.30.0
- [mce] Add enablers for proximity based LPM display states. Fixes JB#17735
- [mce] Add option to use breathing led patterns. Contributes to JB#17229

* Fri May 02 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.29.4
- [mce] Cancel display on linger timeout if exceptional ui state is restarted. Fixes JB#18788

* Fri Apr 25 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.29.3
- [mce] Tune ALS profiles. Fixes JB#12301

* Thu Apr 24 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.29.2
- [mce] Block late suspend while bluetooth activity is seen on D-Bus. Fixes JB#18124

* Wed Apr 23 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.29.1
- [mce] Allow calling notification_begin_req and notification_end_req
- [mce] Leave touch panel powered on during incall proximity blanking. Fixes JB#17155

* Thu Apr 17 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.29.0
- [mce] Add dbus interface to allow notification state manipulation from ui. Fixes JB#17383

* Mon Apr 14 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.28.0
- [mce] Support 100 brightness levels and 21 ALS profiles. Fixes JB#13670

* Wed Apr 09 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.27.0
- [mce] Add runtime setting for unresponsive lipstick killing delay
- [mce] Kill lipstick if it does not respond to setUpdatesEnabled ipc. Fixes JB#18090
- [mce] Start led pattern when killing lipstick

* Tue Apr 08 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.26.0
- [mce] Add option for disabling power key when proximity is covered
- [mce] Allow late suspend during active call. Fixes JB#11399
- [mce] Detect and broadcast device flip over gestures. Fixes JB#17820
- [mce] Send dbus signal if powerkey is pressed during alarm / incoming call. Fixes JB#17794
- [systemd] Fixed mce start dependency. JB#15511

* Wed Mar 26 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.25.3
- [packaging] Add runtime dependency to glib2 >= 2.36.0. Fixes JB#17710

* Wed Mar 26 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.25.2
- [mce] Make shutdown led pattern have priority over powerup pattern. Fixes JB#17671

* Mon Mar 24 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.25.1
- [mce] Do not turn display on battery full
- [mce] Make double tap wakeup cancel notification leds again. Fixes JB#17389

* Tue Mar 18 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.25.0
- [mce] Send led pattern activated/deactivated D-Bus signals
- [mce] Tune debug led pattern priorities
- [mce] Use longer maximum cpu keepalive renew time within mce

* Mon Mar 17 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.24.1
- [mce] Handle io watch error conditions gracefully

* Fri Mar 14 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.24.0
- [mce] Delay automatic unblanking after proximity sensor is uncovered
- [mce] Grab touch input while display is off
- [mce] Grab volume key input while display is off
- [mce] Leave touch panel active during in-call proximity blanking
- [mce] Make doubletap filtering obey the doubletap wakeup setting
- [mce] Ungrab volume keys when music playback is active

* Wed Mar 05 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.9
- [mce] Fix file descriptor leak

* Thu Feb 20 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.8
- [mce] Enhance detection of evdev nodes that report double tap as power key

* Wed Feb 19 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.7
- [mce] Identify processes that do dbus ipc with mce

* Tue Feb 11 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.6
- [mce] Make devel build of mce log important external triggers by default

* Mon Feb 10 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.5
- [mce] Lock ui when device lock is active and display off

* Fri Feb 07 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.4
- [mce] Enable tklock if device lock gets activated
- [packaging] Fix rpm preun/post/postun scripts.

* Tue Feb 04 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.3
- [mce] Hold wakelock while there are active power key related timers
- [mce] Treat "ihfforcall" audio sink as an alias for "ihf"

* Fri Jan 31 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.2
- [mce] Add module for tracking PackageKit D-Bus service and Locked property
- [mce] Allow more time for setUpdatesEnabled ipc roundtrip
- [mce] Also shutdown from act dead activates power off led pattern
- [mce] Block late suspend on battery empty and thermal shutdown
- [mce] Do not queue display off if power key is pressed during fb wakeup
- [mce] Remove calls to non-existing com.nokia.devicelock D-Bus service
- [mce] Support multiple cpu-keepalive contexts for single process

* Tue Jan 21 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.1
- [mce] Allow toggling debug verbosity with SIGUSR1 and SIGUSR2
- [mce] Do not blank screen if touch events are seen after alarm ends

* Thu Jan 16 2014 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.23.0
- [mce] Reimplementation of touch screen and keypad locking subsystem

* Fri Dec 13 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.22.1
- [mce] Improve handling of lipstick ipc failures

* Tue Nov 12 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.22.0
- [mce] Add support for led patterns that auto-disable on display on
- [mce] Communication LED patterns use auto-disable policy

* Thu Nov 07 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.21.1
- [mce] Block display ON/DIM D-Bus requests during call/alarm/proximity
- [mce] Do not turn display on after call ends
- [mce] Keep proximity sensor always enabled
- [mce] Update blanking inhibit also during frame buffer suspend/resume

* Wed Nov 06 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.21.0
- [mce] Add watchdog plugin

* Tue Nov 05 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.20.2
- [mce] Tune blinking led colors

* Fri Nov 01 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.20.1
- [mce] Adjust led blinking periods

* Thu Oct 31 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.20.0
- [evdev_trace] Show current values and ranges for EV_ABS type inputs
- [mce] If possible, use evdev inputs for PS and ALS data
- [mce] Use sensorfw for detecting orientation changes

* Wed Oct 30 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.19.0
- [mce] Add plugin for enabling/disabling doubletap wakeups
- [mcetool] Support query/change of doubletap wakeup settings

* Tue Oct 29 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.18.0
- [display] enable display on/off handling in actdead

* Fri Oct 25 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.11
- [mce] Do not skip tklock ipc during frame buffer suspend/resume
- [mce] Use 40% led brightness if als tuning is not enabled

* Thu Oct 24 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.10
- [mce] Improve oFono voice call state tracking

* Tue Oct 22 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.9
- [evdev_trace] The evdev_trace optionally emits local time of day

* Thu Oct 17 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.8
- [mce] Update hybris LED colors for communication patterns

* Thu Oct 17 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.7
- [mce] Make the 5 different als profiles more distinct

* Wed Oct 16 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.6
- [mce] PowerOn led pattern color is grey75

* Wed Oct 16 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.5
- [mce] Ignore double tap events when proximity sensor is covered
- [mce] Plugins remove sensor input callbacks when unloaded

* Wed Oct 16 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.4
- [mce] Use standby override property for proximity sensor

* Mon Oct 14 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.3
- [mce] Send fake sensor inputs on loss of sensord connection

* Fri Oct 11 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.2
- [mce] Add enablers for stopping sensors in suspend
- [mce] Block late suspend while there are active alarm dialogs

* Fri Oct 11 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.1
- [tests] Unit tests: fix compilation on x86_64

* Fri Oct 11 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.17.0
- [tests] Unit tests: initial commit

* Fri Oct 04 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.16.2
- [mce] Fix adaptive dimming timeout
- [mce] Use default timeout for setUpdatesEnabled() method call

* Wed Oct 02 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.16.1
- [mce] Fix check for existence of CPUScalingGovernor configuration

* Wed Oct 02 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.16.0
- [mce] Activate PowerOn LED pattern during startup
- [mce] Add upower based battery plugin
- [mce] Use upower battery plugin by default

* Fri Sep 27 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.15.4
- [mce] All defined by default LED patterns can be disabled at runtime
- [mce] Make it easier to configure LED patterns in multiple ini-files

* Thu Sep 26 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.15.3
- [mce] Assume unknown audio route equals handset for proximity blanking
- [mce] Block late suspend while there is incoming/active call
- [mce] Make proximity sensor usage optional
- [mce] Sync setUpdatesEnabled() state on mce/lipstick restart

* Tue Sep 24 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.15.2
- [mce] Set target brightness before starting frame buffer resume

* Tue Sep 24 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.15.1
- [mce] Brightness filtering module supports sensorfw only
- [mce] Read current values when enabling ALS/PS

* Thu Sep 19 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.15.0
- [mce] Use sensorfw for ambient light and proximity sensor input

* Wed Sep 04 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.14.1
- [mce] A D-Bus signal is sent on configuration value change
- [mce] Fixes to display/suspend state machine
- [mcetool] Options for tklock simulation and short/long/quick help added

* Thu Aug 29 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.14.0
- [init] Notification sent to systemd when mce has started up
- [init] Tune mce.service startup dependencies

* Wed Aug 28 2013 Pekka Lundstrom <pekka.lundstrom@jollamobile.com> - 1.13.3
- [init] disable mce start before user-session. It causes shutdown problem

* Tue Aug 27 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.13.2
- [init] mce is started before user-session

* Tue Aug 27 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.13.1
- [mce] Use single state machine for both display and suspend policy

* Tue Aug 20 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.13.0
- [mce] Synchronize display off transitions with lipstick

* Fri Aug 09 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.18
- [mce] Add runtime configuration for disabling led patterns

* Wed Aug 07 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.17
- [mce] Delay display state signal broadcasting after suspend

* Wed Aug 07 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.16
- [mce] Setting demo-mode also disables/enables blanking from lock screen
- [mce] Support for never-blank-display mode added

* Thu Aug 01 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.15
- [mce] Add cpu scaling governor policy

* Thu Jul 18 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.14
- [mce] Support frame buffer power control via mce-plugin-libhybris

* Mon Jun 03 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.13
- [mce] Support led patterns via mce-plugin-libhybris
- [modules/led.c] remove i2c-tools buildrequire and use kernel-headers instead
- [sdk] Support display unblanking via double click with mouse
- [verify_version] Make the version verification script read the spec file...
- [verify_version] Make the version verification script read the spec file from a standard location

* Mon May 06 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.12
- [mce] Support ambient light sensor via mce-plugin-libhybris
- [mce] Support proximity sensor via mce-plugin-libhybris
- [packaging] Verify that all files that have mce version agree on it

* Fri May 03 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.11
- [packaging] Fix %setup in mce.spec

* Thu May 02 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.10
- [display.so] Supports display brightness control via libhybris
- [mce] Added support for mce-plugin-libhybris
- [mce] Allow changing config defaults via installing files to /etc/mce
- [mce] Detect also multitouch only devices as touchsreens
- [packaging] mce.spec and mce.changes included in mce source tree

* Mon Apr 15 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.9
- Allow late suspend only when the device is running in the USER mode
- Added builtin-gconf key for color profile
- Removed explicit handling of mce-radio-states.ini file
- Removed support for explicitly named mce ini-files
- Synchronize MCE master radio state with connman OfflineMode property
- Fixes NEMO#658: The use_low_power_mode setting defaults to false
- Do not install gconf schemas if builtin-gconf is in use
- Do not save builtin-gconf keys that still have the default value
- Do not send unwanted replies to get/set_config D-Bus method calls
- The mcetool utility processes command line options in the order given
- The evdev_trace utility accepts partial input event device paths

* Wed Mar 06 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.8
- Allow disabling of automatic screen blanking from lock screen
- System startup ready detection is based on init-done flag file
- Implement cpu-keepalive plugin for mce

* Mon Feb 18 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.7
- Allow user processes to make get_config and set_config method calls
- Added configuration item for disabling automatic suspend

* Thu Feb 07 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.6
- Added evdev_trace utility to mce-tools package
- Improved mce event input diagnostics
- More mce settings can be modified via mcetool utility
- Missing ini-file items not reported in default verbosity

* Thu Jan 24 2013 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 1.12.5
- MCE uses built-in gconf replacement for handling settings internally
  and provides a dbus interface for accessing the settings
- Mcetool uses the mce setting dbus interface instead of gconf
- Fixes NEMO#525: \"mcetool --set-demo-mode=on\" disables screen blanking
- Common mce core functions no longer included in every plugin.so too
- Fixes NEMO#584: Mce sbin binaries now installed to /usr/sbin/ instead
  of /sbin/
- The mce.service and tmpfiles.d hook moved from OBS to mce source tree
- Wakelock manipulation now enabled by default
- Logging changes: removed excess whitespace, error levels used by
  mce conform to syslog priorities, error level indication prefixes
  used for stderr logging
- Autosuspend is enabled/disabled based on display state
- Signals passed via a pipe for processing within the mainloop context
- Autosuspend is blocked during system startup / when mce exits
- MCE supports short command line options too (e.g. -v == --verbose)
- Installing extra ini-files to /etc/mce allows overriding mce.ini
- Evdev input sources can be configured in /etc/mce/*.ini
- Support for short mcetool command line options and changes to
  --set-debug-mode handling
- Display brightness control paths can be specified in config files
- MCE ini-files now have <digit><digit> priority prefixes
- The builtin-gconf values persist over mce restarts
- Late suspend is blocked when the device is shutting down
- Wakelock debugging must be explicitly enabled via --trace=wakelocks
- Autodetect evdev inputs instead of relying on lookup tables
- Display brightness control paths can be probed from /sys/class/backligt

* Thu Nov 29 2012 Vesa Halttunen <vesa.halttunen@jollamobile.com> - 1.12.4
- Added logic for holding wakelocks to block autosuspend while display is on or mce is processing evdev input
- Use unbuffered input channels for chunked data
- Seek errors are no longer silently ignored
- Use custom logic for determining if a io channel is really seekable (at least for now glib thinks all character devices are seekable)
- I/O callbacks for chunked input channels try to read and process multiple chunks in one go
- MCE now does tklock related D-Bus IPC with Lipstick instead of System UI (from Vesa Halttunen)
- MCE no longer tries to make Sysinfod related D-Bus queries
- Various fixes to amount and quality of diagnostic logging in mce & mcetool

* Fri Nov 16  2012 Pekka Lundstrom <pekka.lundstrom@jollamobile.com> - 1.12.3
- Removed dsme socket location from mce.service
  Fixes NEMO#576 : mce should not define dsme socket location

* Fri Nov 9  2012 Pekka Lundstrom <pekka.lundstrom@jollamobile.com> - 1.12.3
- Removed usage of waitfordsme. Systemd takes care on waiting
  Fixes NEMO#568 : mce should be started after dsme without need for waitfordsme
- Added mce.conf to handle /run/mce dir creation by using /etc/tmpfiles.d

* Thu Nov 1  2012 Philippe De Swert <philippe.deswert@jollamobile.com> - 1.12.3
- Fixes NEMO#483: mce wakes up a lot when interacting with touchscreen

* Wed Oct 31 2012 Islam Amer <islam.amer@jollamobile.com> - 1.12.2
- New git tag
- Support for locking the touch screen without blanking the display
- Depends on new mce-dev version

* Wed Oct 31 2012 Islam Amer <islam.amer@jollamobile.com> - 1.12.1
- Remove DISPLAY from service file, it breaks early framebuffer setup (!)
- Update URL in spec file to point at nemomobile github fork

* Fri Oct 26 2012 Philippe De Swert <philippe.deswert@jollamobile.com> - 1.12.1
- Merged everything in git at https://github.com/nemomobile/mce/
- Adding demo mode to keep screen on
- Fix display dbus calls

* Wed Aug 01 2012 Dmitry Rozhkov <dmitry.rozhkov@jollamobile.com> - 1.12.0
- include mce-radio-sates.ini file in the package with initial default radio settings
- add /var/lib/mce directory to the package to allow it to store current radio states.

* Tue Jul 10 2012 Markus Lehtonen <markus.lehtonen@iki.fi> - 1.12.0
- Fixes NEMO#35: Version bump to 1.12.0
- Patches rebased, displaymeego module removed
- New Nemo-compatibility patches for the display module:
  Fix-lock-ui-handling-and-display-blanking-for-nemo.patch
  Disable-bootup-submode-in-display-module.patch

* Tue Jul 10 2012 Marko Saukko <marko.saukko@jollamobile.com> - 1.12.0
- Added 0001-Allow-get_color_profile_ids-dbus-method-usage-and-in.patch
- Don't stop mce on package updates.

* Fri Jan 27 2012 Marko Saukko <marko.saukko@cybercom.com> - 1.10.92
- Added ExecStartPre=/usr/sbin/waitfordsme to systemd service file.

* Thu Nov 17 2011 Marko Saukko <marko.saukko@cybercom.com> - 1.10.92
- Changed systemd service to multi-user.target.

* Thu Sep 15 2011 Marko Saukko <marko.saukko@cybercom.com> - 1.10.92-17
- Systemd service file
- Added yaml and fixed packaging
- changed the DSME socket file location with env variable in systemd.

* Tue Jul 12 2011 Timo Rongas <timo.rongas@digia.com> - 1.10.92-16
- Add reference counting for active calls (BMC#17539)

* Wed Jun 29 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-15
- BMC#19806 fix the periodic display unblank bug which happens if
  the sysuid process frozes in a way that it does not die but on the
  other hand does not also respond to anything.
  mce-1.10.92-bmc19806-do-not-unblank-display-if-dbus-send-fails.patch

* Wed May 11 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-14
- BMC#17416 fix by checking from the tklock whether the
  screen lock ui active or not when handling the power button
  event. Patch is made to updated version of
  mce-1.10.92-pwr-btn-fix-for-display-blank-and-unblank.patch
- reorganized the order how patches are applied on spec file
  as 2 of the patches touches same tklock file

* Wed May 11 2011 Timo Rongas <timo.rongas@digia.com> - 1.10.92-13
- Added ofono signal listening to call state module. Knowing call
  state makes it possible to enable screen blanking/locking via
  proximity sensor during calls (BMC#14990)

* Wed May 11 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-12
- BMC#17413 fix with patch
  mce-1.10.92-fix-n900-tsc2005-sysfs-disable-path-for-newer-kernels.patch.
  Sysfs path for disabling/enabling the touschreen has changed in
  newer kernels for N900 to /sys/devices/platform/omap2_mcspi.1/spi1.0/disable
  This patch will make mce to check both the new and old path for finding
  the correct sysfs file path.

* Mon May 09 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-11
- BMC#15953 Changed the behaviour of power key in unlock case.
  When the screen is off(blank) and power key is pressed, screen is unblanked
  but the \"lock ui\" application is not disabled. Lock key will work just
  like with the previous version, so it will unblank the screen and
  also disable the lock ui application.

* Fri May 06 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-10
- When the device is booted, the initial blanking delay needs to be
  longer to prevent the display to be blanked during the device
  boot-up or immediately after that.
- Simplified mce-1.10.92-pwr-btn-fix-for-display-blank-and-unblank.patch
  by taking out MCE_DISPLAY_TOGGLE related code that this patch
  added, because it was not needed anymore.

* Thu May 05 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-9
- (BMC#15953) Fixed the usage of lock key for locking the screen.
- Fixedthe power button usage for blanking the screen to follow the
  same behaviour with lock/unlock key.
  When the screen is now blanked, it can not be activated anymore
  by simply touching the touchscreen. Instead the user can unblank
  the display either by using the power button or lock/unlock button again.
- The power button will now blank/unblank the screen after release event
  instead of press-event. This will allow user to see the shutdown
  ui, in the case user keeps power button down for a long time in order
  to shutdown the device.
- increased the blanking timeout during inactivity from 30 to 60 sec

* Mon Apr 18 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-8
- (BMC#16313) Added dependency from mce to dsme because mce fails to start
  if dsme is not running.

* Thu Apr 07 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-7
- (BMC#15233) Added MCE_DISPLAY_TOGGLE value to mce.h and and
  send TOGGLE request from the power button keypreses in the event-input.c.
  Added also the code to meegodisplay.c to handle these display toggle requests.

* Wed Apr 06 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-6
- (BMC#14738) Additional fix. Sometimes the screen got invoked couple of
  seconds after blanking it even thought there were not any user activity.
  This was caused by the code in event-input.c which suspended the event
  reading for a while in certain situations after sending the activity
  event. I removed the suspend code and instead use the input events time
  as a filter so that only one activity event is send in maximum on each
  second from the touchscreen events.

* Mon Apr 04 2011 Mika Laitio <ext-mika.laitio@nokia.com> - 1.10.92-5
- (BMC#14738) Add new displaymeego module which simplifies the display blanking
  code that was used in display module by removing all dimming related
  functionality that's not needed and had problems.
- Drop previously used display-module-disabled patch

* Wed Mar 09 2011 Tapio Rantala <ext-tapio.rantala@nokia.com> - 1.10.92-4
- Add silent-fd-close patch from upstream svn (BMC#14264)
  + Don't print unnecessary info on startup
- Add pwr-button-event-name patch from upstream svn
  + Added event driver name for the power button in various MeeGo devices
- Refresh display-module-disabled patch

* Mon Feb 28 2011 Tapio Rantala <ext-tapio.rantala@nokia.com> - 1.10.92-3
- Do not load display module (BMC#13332)

* Wed Jan 26 2011 Tapio Rantala <ext-tapio.rantala@nokia.com> - 1.10.92-2
- Drop init script, part of fix for (BMC#12898)

* Fri Jan 21 2011 Tapio Rantala <ext-tapio.rantala@nokia.com> - 1.10.92-1
- New upstream version (BMC#12782)
- Drop deprecated-names patch, applied upstream

* Fri Jan 14 2011 Tapio Rantala <ext-tapio.rantala@nokia.com> - 1.10.90-1
- Initial meego packaging (FEA#5525) (FEA#5526) (FEA#5527) (FEA#5528)