File _service:tar_git:sensorfw.changes of Package sensorfw-qt5-binder

* Thu Aug 26 2021 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.12.4
- [sensorfw] Remove /usr/include/filters from pkgconfig file as it is not installed. JB#47730

* Wed Jul 21 2021 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.12.3
- [hybrisadaptor] Fix initialization of ranges and intervals. JB#54939
- [hybrisadaptor] Fix scaling of data ranges. JB#54939
- [sensorfw] Discard any old sensor data before starting sensor. JB#54939

* Thu Jan 21 2021 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.12.2
- [packaging] Adjust requirements by using pkgconfig
- [packaging] Refine systemd unit install and test cleanup
- [sensorfw] Cleanup Qt project files. JB#38781
- [sensorfw] Move sensord.sock to /run. JB#52757
- [sensorfw] Properly handle angle rollover in built-in compass support. JB#46853

* Wed Sep 09 2020 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.12.1
- [hybrisadaptor] Fix building rotation vector adaptors with old Android versions. JB#47730
- [packaging] Cleanup spec files. JB38781
- [sensorfw] Remove contact information from copyright headers. JB#47730

* Wed Sep 02 2020 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.12.0
- [hybrisadaptor] Use of hybris rotation vectors for compass. JB#47730

* Mon Aug 24 2020 Matti Kosola <matti.kosola@jollamobile.com> - 0.11.10
- [sensorfw] track D-Bus sender of requestSensor
- [sensorfw] track D-Bus sender of requestSensor. Fixes JB#49275 JB#49276

* Fri May 29 2020 Matti Kosola <matti.kosola@jollamobile.com> - 0.11.9
- [sensorfw] Use qmake properties instead of hardcoded paths. JB#49681

* Wed Feb 19 2020 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.8
- [sensorfw] Add missing suspend blocking capability to systemd service. Fixes JB#48979
- [sensorfw] Remove PrivateNetwork sandboxing option from systemd service. Fixes JB#48890

* Thu Feb 06 2020 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.7
- [sensorfw] Sandbox the sensorfwd service. JB#37897 JB#44449
- [sensorfw] Sandbox the sensorfwd service. JB#44449

* Tue Feb 04 2020 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.6
- [sensorfw] Remove obsolete Qt4 support. Contributes to JB#38781

* Wed Jan 29 2020 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.5
- [debian] Add missing iiosensorsadaptor plugin
- [iioadaptor] Handle edge case for inverted IIO proximity sensor. Fixes MER#2076
- [iioadaptor] Handle edge case for inverted IIO proximity sensor. Fixes MER#2076.
- [iioadaptor] Improve strtol error handling. Contributes to MER#2076

* Fri Oct 25 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.4
- [iioadaptor] Implement IIO proximityadaptor. Fixes MER#2062

* Tue Oct 22 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.3
- [hybrisadaptor] Do not activate sensors during initialization. Contributes to JB#47166

* Fri Oct 11 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.11.2
- [debian] Add required build dependencies for hybris plugin
- [iioadaptor] Detect correct offset, scale and number of used channels
- [iioadaptor] Detect correct offset, scale and number of used channels. Contributes to JB#47730
- [iioadaptor] Do not enable unused buffered mode for iio device
- [iioadaptor] Use iiosensorsadaptor for library name

* Mon Oct 07 2019 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.11.1
- [packaging] Add missing debian build dependencies. Fixes MER#2060

* Wed Aug 14 2019 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.11.0
- [iioadaptor] Allow overriding iioDevices' scaling factor
- [iioadaptor] Allow overriding iioDevices' scaling factor. Fixes MER#2053

* Wed May 08 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.10.13
- [rpm] Fix version mismatch by bumping all versions. JB#45163

* Wed May 08 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.10.12
- [rpm] Fix version numbering in dependencies. JB#45163

* Tue Apr 23 2019 Matti Kosola <matti.kosola@jolla.com> - 0.10.11
- [rpm] Add sensorfw-qt5-hybris.inc to spec source. JB#45163

* Thu Apr 18 2019 Matti Lehtimäki <matti.lehtimaki@jolla.com> - 0.10.10
- [binder] Add binder backend to hybris adaptor. JB#45163
- [filters] Fix uninitialized variable in declination filter. Contributes to JB#45163
- [hybrisadaptor] Add binder backend to hybris adaptor. Fixes JB#45163
- [hybrisadaptor] Rename some functions and variables. Contributes to JB#45163

* Thu Feb 28 2019 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.9
- [compasschain] Change types of the 'oldHeading' and 'heading' variables inside CompassFilter from int to qreal. Fixes MER#2016
- [compasschain] Fix the compass value calculation. Fixes MER#2016

* Mon Feb 25 2019 kende <marko.kenttala@jolla.com> - 0.10.8-2
- [sensorfw] Fixed pkgconfig version, contributes to jb#38551

* Tue Jan 15 2019 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.8
- [packaging] Rename sensorfw-qt5-docs to sensorfw-qt5-doc. Contributes to JB#38578

* Thu Nov 08 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.7
- [config] Rename Config class to SensorFrameworkConfig. Fixes JB#43217

* Mon Oct 01 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.6
- [hybrisadaptor] Deal with sensor type aliasing changes. JB#43020

* Mon Oct 01 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.5
- [hybrisadaptor] Provide fallback sensor maxDelay value. JB#43020

* Fri Sep 28 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.4
- [hybrisadaptor] Provide fallback values for sensor types. JB#43020

* Fri Sep 28 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.3
- [hybrisadaptor] Provide fallback values for select sensors. JB#43020
- [hybrisadaptor] Refactor sensor start/stop logic
- [hybrisadaptor] Subject sensor type specific actions to common policy
- [logging] Allow printf style logging similarly as qDebug() does

* Wed Jun 27 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.2
- [config] Fix naming of device specific template file
- [config] Leave some sensors enabled by default. JB#41369

* Tue Jun 19 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.1
- [compasschain] Connect interval source to orientation adapter. JB#39284
- [hybrisadaptor] Convert hal time values to milliseconds. Fixes JB#39284

* Fri Jun 01 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.10.0
- [config] Process config.d files in alnum order
- [git] Remove .gitignore
- [hybrisadaptor] Use pthreads for hybris reader
- [logging] Use four distinct logging verbosity levels
- [nodebase] Emit debug logging if stub methods are reached
- [packaging] Fix local sensorfwd RPM builds
- [sensord] Use pipe to trasfer posix signals to mainloop
- [sensorfwd] Tweak plugin loading related logging
- [sensormanager] Add plugin availability config and D-Bus queries. JB#41369

* Thu May 24 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.7
- [systemd] Make sensorfwd wait for oneshot-root.service. Fixes JB#41619

* Fri Feb 23 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.6
- [patch] Take patches from LuneOS. Fixes MER#1879

* Fri Feb 23 2018 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.5
- [cleanup] Remove gyroadaptor-evdevplugin.h.autosave file
- [doc] Make @file tags match the actual filenames
- [PATCH] Implement luna-service integration
- [PATCH] Replace android headers hard-coded include path with pkgconfig
- [PATCH] sensord-daemon-conf-setup: improve check for libhybrissensorfw

* Thu Aug 31 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.4
- [hybris-adaptors] Select 1st sensor variant for each sensor type. JB#39550
- [hybris-adaptors] Use wakelock to ensure proximity data io. Fixes JB#39550

* Fri Aug 11 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.3
- [sensorfw] Add hybrispressureadaptor.
- [sensorfw] Add hybrispressureadaptor. Contributes to MER#1649.
- [sensorfw] Various small fixes to comments, defines and adaptor queries. Contributes to MER#1649.

* Tue May 02 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.2
- [sensord] Use systemd notify instead of forking a daemon. Fixes JB#36189

* Tue May 02 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.1
- [sensord] Do not log successful daemon forks. JB#38525
- [systemd] Drop BusName from sensorfwd.service. Fixes JB#38525

* Tue Feb 14 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.9.0
- [hybris-adaptors] add powerstate_path as parameter to start and stop the sensor
- [hybris-adaptors] add powerstate_path as parameter to start and stop the sensor. Fixes MER#1753
- [hybris-adaptors] check if powerstate_path exists

* Wed Feb 08 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.8.33
- [compilation] Workaround missing u64 union in sensors_event_t. MER#1749

* Wed Feb 08 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.8.32
- [compilation] Provide fallback SENSOR_TYPE_STEP_COUNTER value. MER#1749

* Wed Feb 08 2017 Simo Piiroinen <simo.piiroinen@jollamobile.com> - 0.8.31
- [documentation] Fix hiccups in documentation comments. MER#1749
- [environment] Do not use pointers from out-of-scope objects. MER#1749
- [hybrisadaptor] Remove unused static function. Fixes MER#1749
- [iioadaptor] Flag unused parameter. MER#1749
- [iioadaptor] Zero initialize udev device pointer. MER#1749
- [libdata] Use value given to LidData constructor. MER#1749
- [rpmbuild] Remove spec file used for Qt4 builds. MER#1749
- [rpmbuild] Use _smp_mflags instead of jobs macro. MER#1749
- [sensorfw] add step counter sensor
- [sensorfwd] Do not call exit() twice when forking a daemon. MER#1749
- [sensorfw] Fix OBS build. Fixes MER#1728
- [sensorfw] iio.h is not used, so remove it. Fixes MER#1710
- [sensorfw] Use a socket env path if set. Fixes MER#1709
- [tests] Avoid warning from ignoring system() return value. MER#1749
- [tests] Fix undefined behavior. MER#1749

* Mon Sep 05 2016 Slava Monich <slava.monich@jolla.com> - 0.8.30
- [sensorfw] Create SensorManager after forking. Fixes JB#36124

* Wed Aug 24 2016 sage <marko.saukko@gmail.com> - 0.8.29
- [accelerometer] Fix accelerometer crashing with invalid config. Contributes to JB#32073
- [compilation] Fix compilation on glibc 2.23/gcc 6.1.1
- [magnetometer] Fix crash when config is not valid. Contributes to JB#32073

* Tue Oct 13 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.28
- [sensorfw] Contributes to JB#32538 Fix proxy evdev parsing

* Tue Sep 29 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.27
- [sensorfw] Fixes MER#1342. Partial revert of last change. fix standby

* Tue Sep 15 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.26
- [sensorfw] COntributes to JB#31995. Some accel outputs need a multiplier

* Mon Sep 14 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.25
- [sensorfw] FIXES JB#31877 Explicity turn off adaptors when blanking

* Thu Sep 10 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.24
- [sensorfw] Fixes MER#1272 Add start/stop to proximity evdev
- [sensorfw] Fixes MER#1284 explicitly resume and standby, regardless o…
- [sensorfw] Fixes MER#1284 explicitly resume and standby, regardless of screen blank.
- [sensorfw] Fixes MER#1298 switch proxy evdev values

* Mon Aug 17 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.23
- [sensorfw] Contributes to JB#31251 fix accel and proxy evdev
- [sensorfw] Fixes MER#1223. ignore hybris compass raw sensor

* Mon Jul 27 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.21
- [sensorfw] Contributes JB#27912 remove debug output

* Thu Jul 16 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.20
- [sensorfwd] Fixes MER#1170 fix crash in internal compass

* Wed Jul 08 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.19
- [sensorfw] Fixes MER#1159 dont package setup script

* Wed Jul 08 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.18
- [sensorfw] Fixes MER#1159 move setup file out of rpm dir

* Tue Jul 07 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.17
- [sensorfw] Fixes MER#557 Stop config package and install.

* Fri Jul 03 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.16
- [sensorfw] Contributes to MER#1001. send errors to clients.

* Fri Jul 03 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.15
- [sensorfw] Fixes JB#30219 Don't stop thread on display off

* Mon Jun 01 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.14
- [sensorfw] Fixes MER#1043 Don't block when stopping sensors.

* Fri May 08 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.13
- [sensorfw] fix error in avgfilter
- [sensorfw] Fix MER#983 revert accel x & y values.

* Mon Apr 20 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.12
- [sensorfw] Fixes MER#904 Make sure hybris adaptor is being

* Tue Apr 14 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.11
- [packaging] fix rpmlintrc to pass stricter checks
- [sensorfw] Remove rpmlintrc stuff. Fixes MER#893

* Tue Apr 14 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.10
- [sensorfw] get compass working Fixes MER#822
- [sensorfw] get compass working Fixes MER#882
- [sensorfw] remove extra line endings in status report

* Tue Mar 31 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.9
- [sensorfw] Fix hybris compass calibration level.

* Mon Mar 16 2015 Islam Amer <islam.amer@jollamobile.com> - 0.8.8
- [packaging] fix rpmlintrc to pass stricter checks
- [sensorfw] add accel, als, gyro & mag evdev adaptors.
- [sensorfw] let standbyOverride be changed while running

* Wed Feb 25 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.7
- [sensorfw] bump version to 0.8.7

* Thu Feb 12 2015 Marko Saukko <marko.saukko@jolla.com> - 0.8.5.1
- [packaging] Add bug reference for automated builds. Contributes to JB#25152

* Wed Feb 11 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.5
- [sensorfw] bump to 0.8.5 for obs

* Tue Feb 03 2015 Lorn Potter <lorn.potter@gmail.com> - 0.8.3
- [sensorfw] detect N9/N950 properly
- [sensorfw] power up/down proximity sensor
- [sensorfw] power up/down proximity sensor on N9

* Fri Dec 12 2014 Matti Kosola <matti.kosola@jollamobile.com> - 0.8.2
- [rpm] Own sensorfw directories
- [systemd] Start sensord in graphical target instead of basic. Contributes to JB#20442

* Fri Oct 10 2014 Robin Burchell <viroteck@viroteck.net> - 0.8.1
- [build] Make sensorfw build with gcc 4.8. Contributes to JB#22700.

* Sat Oct 04 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.38
- [compilation] Fix compilation on glibc 2.19/gcc 4.8

* Wed Sep 03 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.37
- [sensorfw] Add real calibration level to hybris compass sensor.
- [sensorfw] new property on SensorService

* Thu May 15 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.36.2
- [sensorfw] make hybris proximity send initial data
- [sensorfw] make hybris proximity send initial data. Contributes to JB#10870.

* Wed Mar 12 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.35
- [dconf] Drop usage of gconf and use mlite MGConfItem

* Thu Feb 27 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.34
- [hybrisadaptor] Fix duplicate sensor open/close bug
- [hybrisadaptor] Remove unused fields/methods in reader class
- [hybrisadaptor] Return invalid handle if sensor doesn't exist
- [hybrisadaptor] Simplify HybrisManager::processSample
- [mer-hybris] Drop android/ header prefix
- [mer-hybris] Force hybris configuration if hybris libs are installed
- [mer-hybris] Skip initial update if no proximity sensor is found
- [sensorfw] add compasschain to dependencies of rotation sensor.

* Thu Feb 20 2014 Marko Saukko <marko.saukko@jollamobile.com> - 0.7.3.33
- [packaging] Fix rpm preun/post/postun scripts. Contributes to JB#15597.

* Wed Feb 19 2014 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.32
- [packaging] drop .yaml from packaging.
- [packaging] Fix config packaging a bit to exclude not needed parts.
- [packaging] Fix rpm preun/post/postun scripts.

* Tue Dec 03 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.31
- [sensorfw] make sure to deactive hybris sensor when needed

* Mon Dec 02 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.30
- [sensorfw] correct adapted sensor for orientation is orientation.

* Thu Nov 14 2013 Lorn Potter <lorn.potter@gmail.com> - 0.7.3.29
- [sensorfw] make use of orientation adaptor for compass heading if

* Mon Nov 04 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.28
- [sensorfw] bump version to 0.7.3.28
- [sensorfw] close file descriptor

* Thu Oct 31 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.27
- [sensorfw] bump version to 0.7.3.27
- [sensorfw] send initial proximity data for hybris

* Sun Oct 20 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.26
- [sensorfw] bump version to 0.7.3.26

* Wed Oct 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.24
- [sensorfw] fix up standby resume the adaptors
- [sensorfw] make hybris adaptor work better with suspend and resume modes
- [sensorfw] make sure MceWatcher has current value at start up.
- [sensorfw] try harder to cleanly stop the android reading thread when
- [sensorfw] turn off/on signals according to standbyOverride and

* Wed Oct 09 2013 Robin Burchell <viroteck@viroteck.net> - 0.7.3.22
- [sensorfw] Stop using mce for now. Causes regressions.

* Tue Oct 08 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.20
- [init] sensord should not be started in actdead
- [sensord] Always restart.
- [sensorfw] Actually install the message handler.
- [sensorfw] get rid of mce buildtime requirement

* Mon Oct 07 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.19
- [sensorfw] add logic to hybris suspend and resume
- [sensorfw] Restore mce configuration.

* Fri Oct 04 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.18
- [sensorfw] bump version to 0.7.3.18
- [sensorfw] Remove custom logging framework.
- [systemd] Make sure we dbus socket is there when sensord is starting. Al...
- [systemd] Make sure we dbus socket is there when sensord is starting. Also fix some minor service file typos.

* Thu Sep 26 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.17
- [sensorfw] be sure to specify orientationadaptor for hybris backend
- [sensorfw] bump version to 0.7.3.17

* Tue Sep 24 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.16
- [sensorfw] bump version to 0.7.3.16
- [sensorfw] fix hybris als plugin name
- [sensorfw] Fix in ALSAdaptor, logging and power.

* Thu Sep 19 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.15
- [sensorfw] run conf script after installing hybris package

* Wed Sep 18 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.14
- [packaging] Remove some old dependencies from packaging.
- [sensorfw] bump version to 0.7.3.14

* Mon Sep 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.13
- [sensorfw] hybris build fix

* Mon Sep 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.12
- [sensorfw] try again to fix hybris build

* Mon Sep 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.11
- [sensorfw] add android-headers. fix hybris build.

* Mon Sep 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.10
- [sensorfw] add android-headers for hybris build deps

* Mon Sep 16 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.9
- [sensorfw] fix hybris build

* Mon Sep 02 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.8
- [sensorfw] set primaryuse.conf for hybris based sensors

* Wed Aug 28 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.7
- [sensorfw] add hybris dependency
- [sensorfw] I guess hybris has no pkgconfig

* Wed Aug 28 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.6
- [sensorfw] the pkg is called sensord

* Wed Aug 28 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.5
- [sensorfw] add libhybris dependency

* Wed Aug 28 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.4
- [sensorfw] be sure to add hybris pro file to build it

* Wed Aug 28 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.3
- [sensorfw] initial hybris adaptors
- [sensorfw] initial mag and compass chains.
- [sensorfw] use qt5 sensord, lib, qt4 qt-api compat packaging.

* Mon Jun 24 2013 Lorn Potter <lorn.potter@gmail.com> - 0.7.3.2
- [sensorfw] Also replace the configs package.

* Fri Jun 14 2013 Robin Burchell <viroteck@viroteck.net> - 0.7.3.1
- [sensorfw] Don't build anything but the client library for Qt 5.

* Thu Jun 13 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.3.0
- [sensorfw] bump version 0.7.3.0
- [sensorfw] Fix plugin loading under Qt 5.
- [sensorfw] Remove obsolete debian packaging
- [sensorfw] Remove unnecessary plugin.json.
- [sensorfw] Use Q_OBJECT on all plugin classes to make them loadable.

* Thu May 23 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.9
- [sensorfw] set Provides in spec, to avoid weirdness with obs
- [sensorfw] try and fix obs build. use package name instead of hardcoding.

* Wed May 22 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.8
- [sensorfw] add qmake5_install to spec. bump version

* Wed May 15 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.6
- [sensorfw] Call update-contextkit-providers after installation
- [sensorfw] fix yaml and update spec files
- [sensorfw] move common LIBS stuff to a common file to ease
- [sensorfw] spectacle keeps removing export, so put where it will ignore
- [sensorfw] use name so to be able to use one tarball

* Fri May 10 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.5
- [sensorfw] add sensord-qt5 to provides for package
- [sensorfw] remove provides and obsoletes from qt4-compat package

* Sun May 05 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.4
- [sensorfw] remove mce, change daemon output to syslog/journal

* Fri May 03 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2.3
- [sensorfw] fix for qt4 build and qt5 package build

* Tue Feb 12 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2
- added standbyOverride to steaccel.

* Sat Feb 9 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2
- add patches from obs repo into tarball

* Sun Jan 6 2013 Lorn Potter <lorn.potter@jollamobile.com> - 0.7.2
- Add ste accelerometer adaptor

* Wed Dec 14 2011 Carsten Munk <carsten.munk@gmail.com> - 0.7.2
- Add sensorfw-0.7.2-dep-on-gobject.patch to build with new toolchain