|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan.spec
|
|
|
|
[-]
[+]
|
Changed |
_service
^
|
| @@ -1,7 +1,7 @@
<services>
<service name="tar_git">
<param name="url">https://github.com/mlehtima/droid-config-2011xperia.git</param>
- <param name="branch">exclude_fix</param>
+ <param name="branch">master</param>
<param name="revision">HEAD</param>
<param name="token"/>
<param name="debian">N</param>
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/.gitmodules
^
|
| @@ -1,4 +1,3 @@
[submodule "droid-configs-device"]
path = droid-configs-device
- url = https://github.com/mlehtima/droid-hal-configs
- branch = exclude_fix
+ url = https://github.com/mer-hybris/droid-hal-configs
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_anzu.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_coconut.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_haida.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_hallon.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_iyokan.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_mango.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_satsuma.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_smultron.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-urushi.txt
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/delete_file_urushi.list
^
|
| @@ -0,0 +1,8 @@
+etc/dconf/db/vendor.d/jolla-camera-hw-anzu.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-coconut.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-haida.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-hallon.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-iyokan.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-mango.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-satsuma.txt
+etc/dconf/db/vendor.d/jolla-camera-hw-smultron.txt
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/configs/droid.kmap
^
|
| @@ -1,3 +1,4 @@
+keycode 100 = AltGr
keycode 114 = VolumeDown
keycode 115 = VolumeUp
keycode 163 = MediaNext
@@ -8,4 +9,10 @@
keycode 200 = MediaPlay
keycode 201 = MediaPause
keycode 208 = AudioForward
-keycode 256 = ToggleCallHangup
\ No newline at end of file
+# Depending on the device headset can give either
+# KEY_MEDIA or BTN_MISC so lets map both to ToggleCallHangup
+# KEY_MEDIA
+keycode 226 = ToggleCallHangup
+# BTN_MISC
+keycode 256 = ToggleCallHangup
+
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/droid-configs.inc
^
|
| @@ -97,7 +97,7 @@
Summary: Policy settings for %{rpm_device} hw
Provides: droid-config-policy-settings
Requires: ohm >= 1.1.16
-Requires: ohm-plugins-misc
+Requires: ohm-plugins-misc >= 1.2.0
Requires: ohm-plugins-dbus
Requires: ohm-plugin-telephony
Requires: ohm-plugin-signaling
@@ -106,6 +106,7 @@
Requires: ohm-plugin-resolver
Requires: ohm-plugin-ruleengine
Requires: ohm-plugin-profile
+Requires: ohm-plugin-route
Requires: pulseaudio-modules-nemo-common >= 4.0.11
Requires: pulseaudio-policy-enforcement >= 4.0.8
Requires: policy-settings-common >= 0.2.7
@@ -244,15 +245,7 @@
copy_files_from %{dcd_path}/%{dcd_sparse}
delete_files tmp/droid-config.files delete_file.list 1
copy_files_from %{dcd_path}/sparse
-# Exclude files defined in spec.
-%if 0%{?exclude_files:1}
-cat <<EOF >> tmp/exclude_file.list
-%{exclude_files}
-EOF
-# Remove empty lines from created file
-sed -i '/^\s*$/d' tmp/exclude_file.list
-delete_files tmp/droid-config.files tmp/exclude_file.list 1
-%endif
+delete_files tmp/droid-config.files delete_file_%{rpm_device}.list 1
# This add %config to %files section for files from rpm-config-files.files
config_files tmp/droid-config.files rpm-config-files.files
@@ -376,9 +369,23 @@
# build rnd kickstarts on devel level, release kickstarts on all other levels
%if 0%{?qa_stage_devel:1}
-KS_LEVELS=true %gen_ks %{rpm_device}
+ KS_LEVELS=true
+%else
+ KS_LEVELS=false
+%endif
+
+# build variant ks files if name file exist
+%if 0%{?variant_name_list:1}
+ variants=variant_name.list
+ if [ -e $variants ]; then
+ egrep -v '^#' $variants | (
+ while read line; do
+ %gen_ks "$line"
+ sed -i s/@VARIANT_NAME@/$line/g %{buildroot}/%{_datadir}/kickstarts/*$line*.ks
+ done)
+ fi
%else
-KS_LEVELS=false %gen_ks %{rpm_device}
+ %gen_ks %{rpm_device}
%endif
# Preinit plugins
@@ -395,6 +402,24 @@
(cd $RPM_BUILD_ROOT; ls .%{_datadir}/kickstarts/*.ks) | clean_files > tmp/ssu-kickstarts.files
(cd $RPM_BUILD_ROOT; find .%{_datadir}/ssu/kickstart/ -type f) | clean_files > tmp/kickstart-configuration.files
+(cd $RPM_BUILD_ROOT; find .%{_datadir}/ssu/kickstart/ -type l) | clean_files >> tmp/kickstart-configuration.files
+
+# Append extra_files to the end of droid-config.files.
+if [ -e extra-files.files ]; then
+ cat extra-files.files >> tmp/droid-config.files
+fi
+
+# In some cases we might need to create empty directories that are e.g. mount points
+if [ -e create.dirs ]; then
+ for A in $(cat create.dirs); do
+ mkdir -p $RPM_BUILD_ROOT/$A
+ done
+fi
+
+################################################################
+%post
+# Force an update of ssu repositories
+touch %{board_mapping_dir}/*
################################################################
%post sailfish
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/patterns/templates/jolla-hw-adaptation-@DEVICE@.yaml
^
|
| @@ -15,6 +15,8 @@
- droid-hal-version-@DEVICE@
- pulseaudio-modules-droid
+# for audio recording to work:
+- qt5-qtmultimedia-plugin-mediaservice-gstmediacapture
# These need to be per-device due to differing backends (fbdev, eglfs, hwc, ..?)
- qt5-qtwayland-wayland_egl
@@ -68,7 +70,7 @@
#- telepathy-ring
# For devices where test_gps eventually gets a fix:
-#- geoclue-provider-hybris-community
+#- geoclue-provider-hybris
Summary: Jolla HW Adaptation @DEVICE@
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/etc/pulse/arm_droid_default.pa
^
|
| @@ -0,0 +1,106 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.nofail
+
+.fail
+
+load-module module-droid-keepalive
+
+load-module module-meego-parameters cache=1 directory=/var/lib/nemo-pulseaudio-parameters use_voice=false
+load-module module-meego-mainvolume virtual_stream=true
+
+### Automatically restore the volume of streams
+load-module module-stream-restore-nemo restore_device=no restore_volume=yes restore_muted=no route_table=/etc/pulse/x-maemo-route.table fallback_table=/etc/pulse/x-maemo-stream-restore.table use_voice=false sink_volume_table=/etc/pulse/x-maemo-sink-volume.table
+
+load-module module-match table=/etc/pulse/x-maemo-match.table key=application.name
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+load-module module-null-sink sink_name=sink.null rate=48000
+
+load-module module-droid-card rate=48000 mute_routing_before=24576 mute_routing_after=4096
+
+load-module module-null-sink sink_name=sink.fake.sco rate=8000 channels=1
+load-module module-null-source source_name=source.fake.sco rate=8000 channels=1
+load-module module-bluez4-discover sco_sink=sink.fake.sco sco_source=source.fake.sco
+
+load-module module-policy-enforcement
+
+load-module module-role-ducking trigger_roles=alarm,notification,warning ducking_roles=x-maemo volume=-200dB
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle timeout=1
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Load DBus protocol
+.ifexists module-dbus-protocol.so
+load-module module-dbus-protocol
+.endif
+
+load-module module-switch-on-port-available
+
+### Make some devices default
+set-default-sink sink.primary
+set-default-source source.primary
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/etc/pulse/x-maemo-route.table
^
|
| @@ -1,2 +1,2 @@
-sink-input-by-media-role:x-maemo -15
-sink-input-by-media-role:phone -15 -28
+sink-input-by-media-role:x-maemo -25
+sink-input-by-media-role:phone -15
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/etc/sensorfw/primaryuse.conf
^
|
| @@ -0,0 +1,15 @@
+[plugins]
+accelerometeradaptor = hybrisaccelerometeradaptor
+alsadaptor = hybrisalsadaptor
+proximityadaptor = hybrisproximityadaptor
+magnetometeradaptor = hybrismagnetometeradaptor
+gyroscopeadaptor = hybrisgyroscopeadaptor
+orientationadaptor = hybrisorientationadaptor
+
+[magnetometer]
+scale_coefficient = 1
+transformation_matrix = "-1,0,0,0,1,0,0,0,1"
+needs_calibration = 0
+
+[accelerometer]
+transformation_matrix = "1,0,0,0,1,0,0,0,1"
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/etc/sysconfig/pulseaudio
^
|
| @@ -0,0 +1 @@
+CONFIG="-n --file=/etc/pulse/arm_droid_default.pa"
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/etc/xdg/QtProject/Sensors.conf
^
|
| (renamed from sparse/etc/xdg/QtProject/Sensors.conf)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/var/lib/nemo-pulseaudio-parameters/modes/btmono-hsp/mainvolume
^
|
| +(symlink to ../../algs/mainvolume/btmono)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandbtmono-hfp/mainvolume
^
|
| +(symlink to ../../algs/mainvolume/btmono)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandbtmono-hsp/mainvolume
^
|
| +(symlink to ../../algs/mainvolume/btmono)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandheadset/mainvolume
^
|
| +(symlink to ../../algs/mainvolume/ihf)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/droid-configs-device/sparse/var/lib/nemo-pulseaudio-parameters/modes/ihfandlineout/mainvolume
^
|
| +(symlink to ../../algs/mainvolume/ihf)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-iyokan-0.0.1.tar.bz2/sparse/etc/mce/90backlight.ini
^
|
| @@ -0,0 +1,29 @@
+# Configuration file for MCE - display and keyboard backlight
+# brightness control paths
+#
+# Normally MCE locates display backlight control files by probing
+# few standard places under sysfs. In case the control files are
+# in non-standard directories or probing produces false positive
+# hits, a hardware adaptation specific configuration file should
+# be used to define alternative sets of paths to check before
+# generic probing.
+
+[Display]
+
+# Semicolon separated list of directories that contain writable
+# "brightness" and readable "max_brightness" files.
+#BrightnessDirectory=/sys/devices/i2c-0/0-0036/leds/lm3533-lcd-bl
+
+# In case the control files do not follow the "brightness" and
+# "max_brightness" pattern, semicolon separated list of full paths
+# can be defined. Note that BrightnessPath and MaxBrightnessPath
+# lists must have equal number of entries.
+#BrightnessPath=/sys/path/to/brightness_file
+#MaxBrightnessPath=/sys/path/to/max_brightness_file
+
+[KeyPad]
+
+# Semicolon separated list of directories that contain writable
+# "brightness" and readable "max_brightness" files for
+# keyboard backlight.
+BrightnessDirectory=/sys/class/leds/keyboard-backlight
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-iyokan-1+exclude_fix.20151117164216.6ab6f42.tar.bz2/sparse/etc/pulse/arm_msm7x30_2011xperia.pa
^
|
| @@ -1,109 +0,0 @@
-#!/usr/bin/pulseaudio -nF
-#
-# This file is part of PulseAudio.
-#
-# PulseAudio is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# PulseAudio is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-# General Public License for more details.
-#
-# You should have received a copy of the GNU Lesser General Public License
-# along with PulseAudio; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
-
-# This startup script is used only if PulseAudio is started per-user
-# (i.e. not in system mode)
-
-.nofail
-
-.fail
-
-load-module module-droid-keepalive
-
-load-module module-meego-parameters cache=1 directory=/var/lib/nemo-pulseaudio-parameters use_voice=false
-
-### Automatically restore the volume of streams
-load-module module-stream-restore-nemo restore_device=no restore_volume=yes restore_muted=no route_table=/etc/pulse/x-maemo-route.table fallback_table=/etc/pulse/x-maemo-stream-restore.table use_voice=false sink_volume_table=/etc/pulse/x-maemo-sink-volume.table
-
-load-module module-match table=/etc/pulse/x-maemo-match.table key=application.name
-
-### Automatically augment property information from .desktop files
-### stored in /usr/share/application
-load-module module-augment-properties
-
-load-module module-null-sink sink_name=sink.null rate=48000
-
-#load-module module-droid-card rate=48000
-load-module module-droid-card rate=48000 mute_routing_before=24576 mute_routing_after=4096
-
-load-module module-null-sink sink_name=sink.fake.sco rate=8000 channels=1
-load-module module-null-source source_name=source.fake.sco rate=8000 channels=1
-load-module module-bluez4-discover sco_sink=sink.fake.sco sco_source=source.fake.sco
-
-load-module module-meego-mainvolume virtual_stream=true
-
-load-module module-policy-enforcement
-
-load-module module-role-ducking trigger_roles=alarm,notification,warning ducking_roles=x-maemo volume=-200dB
-
-### Load several protocols
-.ifexists module-esound-protocol-unix.so
-load-module module-esound-protocol-unix
-.endif
-load-module module-native-protocol-unix
-
-### Network access (may be configured with paprefs, so leave this commented
-### here if you plan to use paprefs)
-#load-module module-esound-protocol-tcp
-#load-module module-native-protocol-tcp
-
-### Load the RTP receiver module (also configured via paprefs, see above)
-#load-module module-rtp-recv
-
-### Load the RTP sender module (also configured via paprefs, see above)
-#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
-#load-module module-rtp-send source=rtp.monitor
-
-### Load additional modules from GConf settings. This can be configured with the paprefs tool.
-### Please keep in mind that the modules configured by paprefs might conflict with manually
-### loaded modules.
-.ifexists module-gconf.so
-.nofail
-load-module module-gconf
-.fail
-.endif
-
-### Make sure we always have a sink around, even if it is a null sink.
-load-module module-always-sink
-
-### Honour intended role device property
-load-module module-intended-roles
-
-### Automatically suspend sinks/sources that become idle for too long
-load-module module-suspend-on-idle timeout=1
-
-### If autoexit on idle is enabled we want to make sure we only quit
-### when no local session needs us anymore.
-.ifexists module-console-kit.so
-load-module module-console-kit
-.endif
-.ifexists module-systemd-login.so
-load-module module-systemd-login
-.endif
-
-### Load DBus protocol
-.ifexists module-dbus-protocol.so
-load-module module-dbus-protocol
-.endif
-
-load-module module-switch-on-port-available
-
-### Make some devices default
-set-default-sink sink.primary
-set-default-source source.primary
-
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-iyokan-1+exclude_fix.20151117164216.6ab6f42.tar.bz2/sparse/etc/pulse/xpolicy.conf
^
|
| @@ -1,614 +0,0 @@
-# -------- Group section -------------------------------------------------------
-
-[group]
-name = idle
-flags = nopolicy
-sink = sink.null
-source = sink.null.monitor
-
-[group]
-name = background
-flags = limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = systemsound
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = btnotify
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primaryandbluez
-source = sink.null.monitor
-
-[group]
-name = feedbacksound
-flags = route_audio, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = inputsound
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = event
-flags = set_sink, limit_volume, cork_stream, mute_by_route
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = alarm
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = flash
-flags = limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = player
-flags = route_audio, limit_volume, cork_stream
-#flags = limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = game
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = voiceui
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = ringtone
-#flags = set_sink, limit_volume, mute_by_route
-flags = limit_volume, mute_by_route, cork_stream, media_notify
-sink = sink.primary
-source = source.null.monitor
-
-[group]
-name = camera
-flags = set_sink, set_source, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = videoeditor
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = ipcall
-flags = set_sink, set_source, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-[group]
-name = call
-flags = set_sink, set_source
-sink = sink.primary
-source = source.primary
-
-[group]
-name = navigator
-flags = set_sink, set_source
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = cstone
-flags = route_audio, set_source, limit_volume
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = alwayson
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = nonsilent
-flags = set_sink, limit_volume, cork_stream
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = internal
-flags = nopolicy
-sink = sink.null
-source = source.null.monitor
-
-[group]
-name = outgoing
-flags = route_audio
-sink = sink.primary
-source = sink.null.monitor
-
-[group]
-name = incoming
-flags = route_audio
-sink = sink.null
-source = source.primary
-
-[group]
-name = alien
-flags = route_audio, limit_volume, cork_stream
-sink = sink.primary
-source = source.primary
-
-
-# -------- Card section --------------------------------------------------------
-
-[card]
-type = tvoutandbta2dp
-name = startswith:"bluez_card"
-profile = a2dp
-flags = disable_notify
-
-
-[card]
-type = bta2dp
-name0 = startswith:"bluez_card"
-profile0 = a2dp
-name1 = equals:droid_card.primary
-profile1 = primary-primary
-
-[card]
-type = tvoutandbthsp
-name = startswith:"bluez_card"
-profile = hsp
-flags = disable_notify
-
-[card]
-type = ihfandbthsp
-name0 = startswith:"bluez_card"
-profile0 = hsp
-name1 = equals:droid_card.primary
-profile1 = primary-primary
-flags = disable_notify
-
-[card]
-type = bthsp
-name0 = startswith:"bluez_card"
-profile0 = hsp
-name1 = equals:droid_card.primary
-profile1 = primary-primary
-
-[card]
-type = bthspforcall
-name0 = startswith:"bluez_card"
-profile0 = hsp
-name1 = equals:droid_card.primary
-profile1 = voicecall
-
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-iyokan-1+exclude_fix.20151117164216.6ab6f42.tar.bz2/sparse/etc/sensorfw/primaryuse.conf
^
|
| @@ -1,15 +0,0 @@
-[plugins]
-accelerometeradaptor = hybrisaccelerometeradaptor
-alsadaptor = hybrisalsadaptor
-proximityadaptor = hybrisproximityadaptor
-magnetometeradaptor = hybrismagnetometeradaptor
-gyroscopeadaptor = hybrisgyroscopeadaptor
-orientationadaptor = hybrisorientationadaptor
-
-[magnetometer]
-scale_coefficient = 1
-transformation_matrix = "-1,0,0,0,1,0,0,0,1"
-needs_calibration = 0
-
-[accelerometer]
-transformation_matrix = "1,0,0,0,1,0,0,0,1"
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-iyokan-1+exclude_fix.20151117164216.6ab6f42.tar.bz2/sparse/etc/sysconfig/pulseaudio
^
|
| @@ -1 +0,0 @@
-CONFIG="-n --file=/etc/pulse/arm_msm7x30_2011xperia.pa"
|
