|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie.changes
|
|
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-kinzie.spec
^
|
|
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-kinzie-1+master.20170820105034.fc34baf.tar.bz2/sparse/lib/systemd/system/bluetooth.service.wants/droid-hcismd-up.service
^
|
| -(symlink to ../droid-hcismd-up.service)
|
|
[-]
[+]
|
Deleted |
_service:tar_git:droid-config-kinzie-1+master.20170820105034.fc34baf.tar.bz2/sparse/lib/systemd/system/droid-hcismd-up.service
^
|
| @@ -1,13 +0,0 @@
-[Unit]
-Description=Enable Bluetooth HCI over SMD
-After=droid-late-start.target
-Before=bluetooth.service
-Conflicts=shutdown.target actdead.target
-
-[Service]
-Type=oneshot
-ExecStart=/bin/sh /usr/bin/droid/droid-hcismd-up.sh
-RemainAfterExit=yes
-
-[Install]
-WantedBy=bluetooth.service
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/patterns/jolla-configuration-kinzie.yaml
^
|
| @@ -15,18 +15,29 @@
- sailfish-content-graphics-z@ICON_RES@
# For multi-SIM devices
-#- jolla-settings-networking-multisim
+- jolla-settings-networking-multisim
# Introduced starting Sailfish OS 2.0.4.x:
# 3rd party accounts like Twitter, VK, cloud services, etc
- jolla-settings-accounts-extensions-3rd-party-all
+# Jolla Store items
+- patterns-sailfish-consumer-generic
+
+# Non-trusted app installation support
+- jolla-settings-system-sideloading
+
# For Mozilla location services (online)
- geoclue-provider-mlsdb
# Sailfish OS CSD tool for hardware testing
# needs some configuration to get all features working
- csd
+# sd-utils for mounting sdcard
+- sd-utils
+
+# For all keyboard layouts
+- jolla-keyboard-layout-all
Summary: Jolla Configuration kinzie
|
|
[-]
[+]
|
Changed |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/patterns/jolla-hw-adaptation-kinzie.yaml
^
|
| @@ -48,7 +48,7 @@
- gstreamer1.0-plugins-bad
- nemo-gstreamer1.0-interfaces
# For devices with droidmedia and gst-droid built, see HADK pdf for more information
-#- gstreamer1.0-droid
+- gstreamer1.0-droid
# This is needed for notification LEDs
- mce-plugin-libhybris
@@ -76,6 +76,8 @@
# For GPS
- geoclue-provider-hybris
+- jolla-settings-system-flashlight
+
# For FM radio on some QCOM devices
#- qt5-qtmultimedia-plugin-mediaservice-irisradio
#- jolla-mediaplayer-radio
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/dconf/db/vendor.d/jolla-camera-hw.txt
^
|
| @@ -0,0 +1,55 @@
+[apps/jolla-camera/primary/image]
+imageResolution='5344x4008'
+videoResolution='3840x2160'
+viewfinderResolution='1440x1080'
+isoValues=[0, 100, 200, 400]
+whiteBalanceValues=[0, 3, 2, 6, 5]
+focusDistanceValues=[8, 4, 16]
+flashValues=[1, 2, 4]
+exposureCompensationValues=[4, 2, 0, -2, -4]
+imageResolution_4_3='5344x4008'
+imageResolution_16_9='5344x3006'
+viewfinderResolution_4_3='1440x1080'
+viewfinderResolution_16_9='1920x1080'
+resolutionText_4_3='camera_settings-me-4-3-8m'
+resolutionText_16_9='camera_settings-me-16-9-6m'
+focusDistance=16
+
+[apps/jolla-camera/secondary/image]
+imageResolution='2592x1944'
+videoResolution='1920x1080'
+viewfinderResolution='1440x1080'
+isoValues=[0, 100, 200, 400]
+whiteBalanceValues=[0, 3, 2, 6, 5]
+focusDistanceValues=[4]
+flashValues=[1, 2, 4]
+exposureCompensationValues=[4, 2, 0, -2, -4]
+imageResolution_4_3='2592x1944'
+imageResolution_16_9='2592x1458'
+viewfinderResolution_4_3='1440x1080'
+viewfinderResolution_16_9='1920x1080'
+resolutionText_4_3='camera_settings-me-4-3-2m'
+resolutionText_16_9='camera_settings-me-16-9-1m'
+focusDistance=4
+
+[apps/jolla-camera/primary/video]
+imageResolution='3840x2160'
+videoResolution='3840x2160'
+viewfinderResolution='1920x1080'
+isoValues=[0, 100, 200, 400]
+whiteBalanceValues=[0, 3, 2, 6, 5]
+focusDistanceValues=[4, 16]
+flashValues=[2]
+exposureCompensationValues=[4, 2, 0, -2, -4]
+focusDistance=16
+
+[apps/jolla-camera/secondary/video]
+imageResolution='1920x1080'
+videoResolution='1920x1080'
+viewfinderResolution='1920x1080'
+isoValues=[0, 100, 200, 400]
+whiteBalanceValues=[0, 3, 2, 6, 5]
+focusDistanceValues=[4]
+flashValues=[2]
+exposureCompensationValues=[4, 2, 0, -2, -4]
+focusDistance=4
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/gst-droid/gstdroidcamsrc-0.conf
^
|
| @@ -0,0 +1,107 @@
+# configuration for device 0
+
+[flash-mode]
+# 0 = GST_PHOTOGRAPHY_FLASH_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_FLASH_MODE_OFF
+# 2 = GST_PHOTOGRAPHY_FLASH_MODE_ON
+0 = auto
+1 = off
+2 = on
+
+[focus-mode]
+# 0 = GST_PHOTOGRAPHY_FOCUS_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_FOCUS_MODE_MACRO
+# 2 = GST_PHOTOGRAPHY_FOCUS_MODE_PORTRAIT
+# 3 = GST_PHOTOGRAPHY_FOCUS_MODE_INFINITY
+# 4 = GST_PHOTOGRAPHY_FOCUS_MODE_HYPERFOCAL
+# 5 = GST_PHOTOGRAPHY_FOCUS_MODE_EXTENDED
+# 6 = GST_PHOTOGRAPHY_FOCUS_MODE_CONTINUOUS_NORMAL
+# 7 = GST_PHOTOGRAPHY_FOCUS_MODE_CONTINUOUS_EXTENDED
+# 8 = GST_PHOTOGRAPHY_FOCUS_MODE_MANUAL
+0 = auto
+3 = infinity
+6 = continuous
+7 = continuous
+
+[white-balance-mode]
+# 0 = GST_PHOTOGRAPHY_WB_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_WB_MODE_DAYLIGHT
+# 2 = GST_PHOTOGRAPHY_WB_MODE_CLOUDY
+# 3 = GST_PHOTOGRAPHY_WB_MODE_SUNSET
+# 4 = GST_PHOTOGRAPHY_WB_MODE_TUNGSTEN
+# 5 = GST_PHOTOGRAPHY_WB_MODE_FLUORESCENT
+# 6 = GST_PHOTOGRAPHY_WB_MODE_MANUAL
+# 7 = GST_PHOTOGRAPHY_WB_MODE_WARM_FLUORESCENT
+# 8 = GST_PHOTOGRAPHY_WB_MODE_SHADE
+0 = auto
+1 = daylight
+2 = cloudy-daylight
+4 = incandescent
+5 = fluorescent
+
+[scene-mode]
+# 0 = GST_PHOTOGRAPHY_SCENE_MODE_MANUAL
+# 1 = GST_PHOTOGRAPHY_SCENE_MODE_CLOSEUP
+# 2 = GST_PHOTOGRAPHY_SCENE_MODE_PORTRAIT
+# 3 = GST_PHOTOGRAPHY_SCENE_MODE_LANDSCAPE
+# 4 = GST_PHOTOGRAPHY_SCENE_MODE_SPORT
+# 5 = GST_PHOTOGRAPHY_SCENE_MODE_NIGHT
+# 6 = GST_PHOTOGRAPHY_SCENE_MODE_AUTO
+# 7 = GST_PHOTOGRAPHY_SCENE_MODE_ACTION
+# 8 = GST_PHOTOGRAPHY_SCENE_MODE_NIGHT_PORTRAIT
+# 9 = GST_PHOTOGRAPHY_SCENE_MODE_THEATRE
+# 10 = GST_PHOTOGRAPHY_SCENE_MODE_BEACH
+# 11 = GST_PHOTOGRAPHY_SCENE_MODE_SNOW
+# 12 = GST_PHOTOGRAPHY_SCENE_MODE_SUNSET
+# 13 = GST_PHOTOGRAPHY_SCENE_MODE_STEADY_PHOTO
+# 14 = GST_PHOTOGRAPHY_SCENE_MODE_FIREWORKS
+# 15 = GST_PHOTOGRAPHY_SCENE_MODE_PARTY
+# 16 = GST_PHOTOGRAPHY_SCENE_MODE_CANDLELIGHT
+# 17 = GST_PHOTOGRAPHY_SCENE_MODE_BARCODE
+6 = auto
+
+[color-tone-mode]
+# 0 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NORMAL
+# 1 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SEPIA
+# 2 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NEGATIVE
+# 3 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_GRAYSCALE
+# 4 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NATURAL
+# 5 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_VIVID
+# 6 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_COLORSWAP
+# 7 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SOLARIZE
+# 8 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_OUT_OF_FOCUS
+# 9 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SKY_BLUE
+# 10 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_GRASS_GREEN
+# 11 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SKIN_WHITEN
+# 12 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_POSTERIZE
+# 13 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_WHITEBOARD
+# 14 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_BLACKBOARD
+# 15 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_AQUA
+0 = none
+1 = sepia
+2 = negative
+3 = mono
+7 = solarize
+12 = posterize
+13 = whiteboard
+14 = blackboard
+15 = aqua
+
+[iso-speed]
+0 = auto
+100 = ISO100
+200 = ISO200
+400 = ISO400
+800 = ISO800
+1600 = ISO1600
+
+[flicker-mode]
+# 0 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_OFF
+# 1 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_50HZ
+# 2 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_60HZ
+# 3 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_AUTO
+0 = off
+1 = 50hz
+2 = 60hz
+3 = auto
+
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/gst-droid/gstdroidcamsrc-1.conf
^
|
| @@ -0,0 +1,104 @@
+# configuration for device 1
+
+[flash-mode]
+# 0 = GST_PHOTOGRAPHY_FLASH_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_FLASH_MODE_OFF
+# 2 = GST_PHOTOGRAPHY_FLASH_MODE_ON
+0 = auto
+1 = off
+2 = on
+
+[focus-mode]
+# 0 = GST_PHOTOGRAPHY_FOCUS_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_FOCUS_MODE_MACRO
+# 2 = GST_PHOTOGRAPHY_FOCUS_MODE_PORTRAIT
+# 3 = GST_PHOTOGRAPHY_FOCUS_MODE_INFINITY
+# 4 = GST_PHOTOGRAPHY_FOCUS_MODE_HYPERFOCAL
+# 5 = GST_PHOTOGRAPHY_FOCUS_MODE_EXTENDED
+# 6 = GST_PHOTOGRAPHY_FOCUS_MODE_CONTINUOUS_NORMAL
+# 7 = GST_PHOTOGRAPHY_FOCUS_MODE_CONTINUOUS_EXTENDED
+# 8 = GST_PHOTOGRAPHY_FOCUS_MODE_MANUAL
+4 = fixed
+
+[white-balance-mode]
+# 0 = GST_PHOTOGRAPHY_WB_MODE_AUTO
+# 1 = GST_PHOTOGRAPHY_WB_MODE_DAYLIGHT
+# 2 = GST_PHOTOGRAPHY_WB_MODE_CLOUDY
+# 3 = GST_PHOTOGRAPHY_WB_MODE_SUNSET
+# 4 = GST_PHOTOGRAPHY_WB_MODE_TUNGSTEN
+# 5 = GST_PHOTOGRAPHY_WB_MODE_FLUORESCENT
+# 6 = GST_PHOTOGRAPHY_WB_MODE_MANUAL
+# 7 = GST_PHOTOGRAPHY_WB_MODE_WARM_FLUORESCENT
+# 8 = GST_PHOTOGRAPHY_WB_MODE_SHADE
+0 = auto
+1 = daylight
+2 = cloudy-daylight
+4 = incandescent
+5 = fluorescent
+
+[scene-mode]
+# 0 = GST_PHOTOGRAPHY_SCENE_MODE_MANUAL
+# 1 = GST_PHOTOGRAPHY_SCENE_MODE_CLOSEUP
+# 2 = GST_PHOTOGRAPHY_SCENE_MODE_PORTRAIT
+# 3 = GST_PHOTOGRAPHY_SCENE_MODE_LANDSCAPE
+# 4 = GST_PHOTOGRAPHY_SCENE_MODE_SPORT
+# 5 = GST_PHOTOGRAPHY_SCENE_MODE_NIGHT
+# 6 = GST_PHOTOGRAPHY_SCENE_MODE_AUTO
+# 7 = GST_PHOTOGRAPHY_SCENE_MODE_ACTION
+# 8 = GST_PHOTOGRAPHY_SCENE_MODE_NIGHT_PORTRAIT
+# 9 = GST_PHOTOGRAPHY_SCENE_MODE_THEATRE
+# 10 = GST_PHOTOGRAPHY_SCENE_MODE_BEACH
+# 11 = GST_PHOTOGRAPHY_SCENE_MODE_SNOW
+# 12 = GST_PHOTOGRAPHY_SCENE_MODE_SUNSET
+# 13 = GST_PHOTOGRAPHY_SCENE_MODE_STEADY_PHOTO
+# 14 = GST_PHOTOGRAPHY_SCENE_MODE_FIREWORKS
+# 15 = GST_PHOTOGRAPHY_SCENE_MODE_PARTY
+# 16 = GST_PHOTOGRAPHY_SCENE_MODE_CANDLELIGHT
+# 17 = GST_PHOTOGRAPHY_SCENE_MODE_BARCODE
+6 = auto
+
+[color-tone-mode]
+# 0 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NORMAL
+# 1 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SEPIA
+# 2 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NEGATIVE
+# 3 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_GRAYSCALE
+# 4 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_NATURAL
+# 5 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_VIVID
+# 6 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_COLORSWAP
+# 7 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SOLARIZE
+# 8 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_OUT_OF_FOCUS
+# 9 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SKY_BLUE
+# 10 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_GRASS_GREEN
+# 11 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_SKIN_WHITEN
+# 12 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_POSTERIZE
+# 13 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_WHITEBOARD
+# 14 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_BLACKBOARD
+# 15 = GST_PHOTOGRAPHY_COLOR_TONE_MODE_AQUA
+0 = none
+1 = sepia
+2 = negative
+3 = mono
+7 = solarize
+12 = posterize
+13 = whiteboard
+14 = blackboard
+15 = aqua
+
+[iso-speed]
+0 = auto
+100 = ISO100
+200 = ISO200
+400 = ISO400
+800 = ISO800
+1600 = ISO1600
+
+[flicker-mode]
+# 0 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_OFF
+# 1 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_50HZ
+# 2 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_60HZ
+# 3 = GST_PHOTOGRAPHY_FLICKER_REDUCTION_AUTO
+0 = off
+1 = 50hz
+2 = 60hz
+3 = auto
+
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/gst-droid/gstdroidcodec.conf
^
|
| @@ -0,0 +1,2 @@
+[decoder-quirks]
+video/avc = use-codec-supplied-height
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/media_codecs_performance.xml
^
|
| +(symlink to /system/etc/media_codecs_performance.xml)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/modules-load.d/wifi.conf
^
|
| @@ -0,0 +1 @@
+wlan
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/ofono/ril_subscription.conf
^
|
| @@ -0,0 +1,270 @@
+# This is a sample configuration file for Jolla ril driver
+#
+# This file is expected to be installed in /etc/ofono
+#
+# Configuration for each modem is defined in its own [ril_x] section,
+# common settings are in the [Settings] section, all other sections
+# are ignored.
+#
+# If any value from [ril_x] section (except "socket") is defined
+# in the [Settings] section, it becomes the default for all modems.
+# Default values can still be redefined at [ril_x] level.
+#
+
+[Settings]
+
+# This option stops RIL plugin from creating any RIL modems.
+# If it's set to true, all [ril_x] sections are ignored even
+# if they are present, and no default configurtation is created.
+#
+# Default is false
+#
+#EmptyConfig=false
+
+# If the phone has more than one SIM slot, the 3G/LTE module may be
+# shared by all modems, meaning that only one of the slots can use
+# 3G/LTE. In order to "hand 4G over" to the other slot, the modem
+# currently using 3G/LTE has to drop to GSM, release 3G/LTE module
+# and only then 3G/LTE can be used by the other modem. This setting
+# allows to disable this behaviour (say, if your phone has independent
+# 3G/LTE modules for each slot or you don't need 4G for both slots).
+# Obviously, it only has any effect if you have more than one SIM.
+#
+# Default is true (switch the current data modem to 2G when changing
+# the data modems)
+#
+#3GLTEHandover=true
+
+[ril_0]
+
+# Required entry, defines the RIL socket path
+socket=/dev/socket/rild
+
+# Subscription string. Some (mostly, older) RILs require that 4 bytes
+# (usually SUB1 or SUB2) are written to the socket before rild starts
+# talking to us.
+#
+# Not sent by default.
+#
+#sub=SUB1
+
+# RIL logging prefix, to tell one socket from another in the log.
+# Makes sense if you have more than one modem configured.
+#
+# No prefix by default.
+#
+#name=RIL1
+
+# Slot id for SET_UICC_SUBSCRIPTION request.
+#
+# By default the first modem becomes slot 0, the next one slot 1 and so on.
+#
+#slot=0
+
+# RIL request timeout, in milliseconds.
+#
+# The default is zero (no timeout)
+#
+#timeout=0
+
+# Setting this one to false would disable 4G technology selection.
+#
+# By default 4G is enabled
+#
+#enable4G=true
+
+# RIL_REQUEST_SET_UICC_SUBSCRIPTION is 115 in RIL version 9 (or earlier)
+# and 122 in RIL version 10 and later. Since ofono doesn't know in advance
+# which RIL version it's dealing with, it makes the decision at runtime.
+# Settings it to false disables the workaround and always sends 122.
+#
+# Default is true (select SET_UICC_SUBSCRIPTION based on the RIL version)
+#
+#uiccWorkaround=true
+
+# Points to the file containing comma-separated ECC (Emergency List Codes)
+# list, e.g. 911,112,*911,#911. The file is tracked by ofono and when its
+# contents changes, it's reflected in the EmergencyNumbers property of
+# org.ofono.VoiceCallManager.
+#
+# If necessary, the contents of the file can be synchronized with the
+# Android system property by adding something like this to /init.rc:
+#
+# on property:ril.ecclist=*
+# write /var/lib/ofono/ril.ecclist ${ril.ecclist}
+# chmod 0644 /var/lib/ofono/ril.ecclist
+#
+#ecclistFile=/var/lib/ofono/ril.ecclist
+
+# RIL_REQUEST_ALLOW_DATA may or may not be supported by your RIL.
+# This option allows you to forcibly enable or disable use of this request.
+# Possible values are auto, on and off
+#
+# Default is auto (usage based on the RIL version)
+#
+#allowDataReq=auto
+
+# Since RIL interface doesn't provide the standard way of querying the
+# number of pin retries left, some RIL implementation (namely Qualcomm)
+# allow to query the retry count by sending the empty pin. If your RIL
+# actually does check the empty pin (and decrements the retry count)
+# then you should turn this feature off.
+#
+# Default is true
+#
+#emptyPinQuery=true
+
+# Different RILs use different data call structures which don't necessarily
+# match the format specified in the data list header. The header may have
+# version 9 but the list may contain RIL_Data_Call_Response_v6 structures,
+# list version 10 may contain RIL_Data_Call_Response_v11 and so on. By default
+# ofono assumes that the version from the list header matches the contents
+# but sometimes you have to explicitly tell ofono which one to use.
+# Possible values are 6, 9, 11 and auto.
+#
+# Default is auto
+#
+#dataCallFormat=auto
+
+# Data call may fail with status 65535 which according to ril.h means that
+# we need to retry silently. The maximum number of retries is limited by
+# this parameter. Usually, one retry is enough. The first retry occurs
+# immediately, the subsequent ones after dataCallRetryDelay (see below)
+#
+# Default is 4
+#
+#dataCallRetryLimit=4
+
+# Delay between data call retries, in milliseconds. Note that the first
+# retry occurs immediately after the first failure, the delays are only
+# applied if the first retry fails too.
+#
+# Default is 200 ms
+#
+#dataCallRetryDelay=200
+
+# Additional local and remote hangup reasons. Remote reasons are checked
+# first. Normally, RIL plugin figures it out automatically. You would only
+# need to define these if your RIL does something unusual.
+#
+# No default
+#
+#remoteHangupReasons=20
+#localHangupReasons=23
+
+#[ril_1]
+
+# Required entry, defines the RIL socket path
+#socket=/dev/socket/rild2
+
+# Subscription string. Some (mostly, older) RILs require that 4 bytes
+# (usually SUB1 or SUB2) are written to the socket before rild starts
+# talking to us.
+#
+# Not sent by default.
+#
+#sub=SUB1
+
+# RIL logging prefix, to tell one socket from another in the log.
+# Makes sense if you have more than one modem configured.
+#
+# No prefix by default.
+#
+#name=RIL1
+
+# Slot id for SET_UICC_SUBSCRIPTION request.
+#
+# By default the first modem becomes slot 0, the next one slot 1 and so on.
+#
+#slot=0
+
+# RIL request timeout, in milliseconds.
+#
+# The default is zero (no timeout)
+#
+#timeout=0
+
+# Setting this one to false would disable 4G technology selection.
+#
+# By default 4G is enabled
+#
+#enable4G=true
+
+# RIL_REQUEST_SET_UICC_SUBSCRIPTION is 115 in RIL version 9 (or earlier)
+# and 122 in RIL version 10 and later. Since ofono doesn't know in advance
+# which RIL version it's dealing with, it makes the decision at runtime.
+# Settings it to false disables the workaround and always sends 122.
+#
+# Default is true (select SET_UICC_SUBSCRIPTION based on the RIL version)
+#
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/etc/ohm/plugins.d/accessories.ini
^
|
| @@ -0,0 +1,4 @@
+eci-probe-delay = 2500
+disable-incompatible-quirk = true
+jack-match = msm8994-florida-snd-card Headset Jack
+jack-device = /dev/input/event4
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/lib/systemd/system/firmware.service
^
|
| @@ -0,0 +1,20 @@
+[Unit]
+Description=Droid mount for /firmware
+Before=local-fs.target systemd-modules-load.service
+DefaultDependencies=no
+# Lets not do Requires= here as that means that this service will restart which leads automatically
+# to broken state as android init can be only started once per boot. If something goes wrong
+# our best hope is that android init doesn't notice that and that the crashing party fixes itself :)
+
+[Service]
+Type=notify
+NotifyAccess=all
+ExecStart=/bin/sh /usr/bin/droid/extract_firmware.sh
+#Restart=always
+# Lets make sure we don't block minutes in case of errors.
+TimeoutSec=15
+#StartLimitInterval=60
+#StartLimitBurst=2
+
+[Install]
+WantedBy=local-fs.target
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/lib/systemd/system/local-fs.target.wants/firmware.service
^
|
| +(symlink to ../firmware.service)
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/lib/udev/rules.d/999-droid-vidc.rules
^
|
| @@ -0,0 +1,5 @@
+KERNEL=="video32", MODE="0660", GROUP="audio", OWNER="system"
+KERNEL=="video33", MODE="0660", GROUP="audio", OWNER="system"
+
+KERNEL=="video32", SYMLINK+="video/venus_dec"
+KERNEL=="video33", SYMLINK+="video/venus_enc"
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/usr/bin/droid/setup_hotplug.sh
^
|
| @@ -0,0 +1,10 @@
+echo 0 > /sys/devices/system/cpu/cpu4/core_ctl/max_cpus
+echo 0 > /sys/devices/system/cpu/cpu4/core_ctl/min_cpus
+echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
+echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
+echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/is_big_cluster
+echo 1 > /sys/devices/system/cpu/cpu0/core_ctl/min_cpus
+echo 4 > /sys/devices/system/cpu/cpu0/core_ctl/max_cpus
+echo 85 > /sys/devices/system/cpu/cpu0/core_ctl/busy_down_thres
+echo 75 > /sys/devices/system/cpu/cpu0/core_ctl/busy_up_thres
+echo 0 > /sys/devices/system/cpu/cpu0/core_ctl/is_big_cluster
\ No newline at end of file
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/var/lib/flash-partition/device-info
^
|
| @@ -0,0 +1,7 @@
+CPUCHECK_STRING="Qualcomm Technologies, Inc MSM8994"
+
+PART_1="boot"
+
+PART_REAL_1="mmcblk0p36"
+
+PART_I="1"
|
|
[-]
[+]
|
Added |
_service:tar_git:droid-config-kinzie-1.0.0.tar.bz2/sparse/var/lib/platform-updates/flash-bootimg.sh
^
|
| @@ -0,0 +1,3 @@
+#!/bin/sh
+/usr/sbin/flash-partition boot /boot/hybris-boot.img
+
|
