|
[-]
[+]
|
Changed |
_service:tar_git:sqlite.changes
|
|
|
|
[-]
[+]
|
Changed |
_service:tar_git:sqlite.spec
^
|
|
|
|
[-]
[+]
|
Changed |
_service
^
|
| @@ -1,10 +1,10 @@
<services>
<service name="webhook">
- <param name="repourl">https://github.com/rojkov/sqlite.git</param>
+ <param name="repourl">https://git.merproject.org/mer-core/sqlite.git</param>
<param name="branch">master</param>
</service>
<service name="tar_git">
- <param name="url">https://github.com/rojkov/sqlite.git</param>
+ <param name="url">https://git.merproject.org/mer-core/sqlite.git</param>
<param name="branch">master</param>
<param name="dumb"/>
</service>
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/INSTALL
^
|
| @@ -0,0 +1,370 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994-1996, 1999-2002, 2004-2011 Free Software Foundation,
+Inc.
+
+ Copying and distribution of this file, with or without modification,
+are permitted in any medium without royalty provided the copyright
+notice and this notice are preserved. This file is offered as-is,
+without warranty of any kind.
+
+Basic Installation
+==================
+
+ Briefly, the shell commands `./configure; make; make install' should
+configure, build, and install this package. The following
+more-detailed instructions are generic; see the `README' file for
+instructions specific to this package. Some packages provide this
+`INSTALL' file but do not implement all of the features documented
+below. The lack of an optional feature in a given package is not
+necessarily a bug. More recommendations for GNU packages can be found
+in *note Makefile Conventions: (standards)Makefile Conventions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You need `configure.ac' if
+you want to change it or regenerate `configure' using a newer version
+of `autoconf'.
+
+ The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system.
+
+ Running `configure' might take a while. While running, it prints
+ some messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package, generally using the just-built uninstalled binaries.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation. When installing into a prefix owned by root, it is
+ recommended that the package be configured and built as a regular
+ user, and only the `make install' phase executed with root
+ privileges.
+
+ 5. Optionally, type `make installcheck' to repeat any self-tests, but
+ this time using the binaries in their final installed location.
+ This target does not install anything. Running this target as a
+ regular user, particularly if the prior `make install' required
+ root privileges, verifies that the installation completed
+ correctly.
+
+ 6. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+ 7. Often, you can also type `make uninstall' to remove the installed
+ files again. In practice, not all packages have tested that
+ uninstallation works correctly, even though it is required by the
+ GNU Coding Standards.
+
+ 8. Some packages, particularly those that use Automake, provide `make
+ distcheck', which can by used by developers to test that all other
+ targets like `make install' and `make uninstall' work correctly.
+ This target is generally not run by end users.
+
+Compilers and Options
+=====================
+
+ Some systems require unusual options for compilation or linking that
+the `configure' script does not know about. Run `./configure --help'
+for details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c99 CFLAGS=-g LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+ You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you can use GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'. This
+is known as a "VPATH" build.
+
+ With a non-GNU `make', it is safer to compile the package for one
+architecture at a time in the source code directory. After you have
+installed the package for one architecture, use `make distclean' before
+reconfiguring for another architecture.
+
+ On MacOS X 10.5 and later systems, you can create libraries and
+executables that work on multiple system types--known as "fat" or
+"universal" binaries--by specifying multiple `-arch' options to the
+compiler but only a single `-arch' option to the preprocessor. Like
+this:
+
+ ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
+ CPP="gcc -E" CXXCPP="g++ -E"
+
+ This is not guaranteed to produce working output in all cases, you
+may have to build one architecture at a time and combine the results
+using the `lipo' tool if you have problems.
+
+Installation Names
+==================
+
+ By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc. You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX', where PREFIX must be an
+absolute file name.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them. In general, the
+default for these options is expressed in terms of `${prefix}', so that
+specifying just `--prefix' will affect all of the other directory
+specifications that were not explicitly provided.
+
+ The most portable way to affect installation locations is to pass the
+correct locations to `configure'; however, many packages provide one or
+both of the following shortcuts of passing variable assignments to the
+`make install' command line to change installation locations without
+having to reconfigure or recompile.
+
+ The first method involves providing an override variable for each
+affected directory. For example, `make install
+prefix=/alternate/directory' will choose an alternate location for all
+directory configuration variables that were expressed in terms of
+`${prefix}'. Any directories that were specified during `configure',
+but not in terms of `${prefix}', must each be overridden at install
+time for the entire installation to be relocated. The approach of
+makefile variable overrides for each directory variable is required by
+the GNU Coding Standards, and ideally causes no recompilation.
+However, some platforms have known limitations with the semantics of
+shared libraries that end up requiring recompilation when using this
+method, particularly noticeable in packages that use GNU Libtool.
+
+ The second method involves providing the `DESTDIR' variable. For
+example, `make install DESTDIR=/alternate/directory' will prepend
+`/alternate/directory' before all installation names. The approach of
+`DESTDIR' overrides is not required by the GNU Coding Standards, and
+does not work on platforms that have drive letters. On the other hand,
+it does better at avoiding recompilation issues, and works well even
+when some directory options were not specified in terms of `${prefix}'
+at `configure' time.
+
+Optional Features
+=================
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+ Some packages pay attention to `--enable-FEATURE' options to
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/Makefile.am
^
|
| @@ -0,0 +1,19 @@
+
+AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
+
+lib_LTLIBRARIES = libsqlite3.la
+libsqlite3_la_SOURCES = sqlite3.c
+libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
+
+bin_PROGRAMS = sqlite3
+sqlite3_SOURCES = shell.c sqlite3.c sqlite3.h
+sqlite3_LDADD = @READLINE_LIBS@
+sqlite3_CFLAGS = $(AM_CFLAGS)
+
+include_HEADERS = sqlite3.h sqlite3ext.h
+
+EXTRA_DIST = sqlite3.1 tea
+pkgconfigdir = ${libdir}/pkgconfig
+pkgconfig_DATA = sqlite3.pc
+
+man_MANS = sqlite3.1
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/Makefile.in
^
|
| @@ -0,0 +1,934 @@
+# Makefile.in generated by automake 1.11.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+
+VPATH = @srcdir@
+am__make_dryrun = \
+ { \
+ am__dry=no; \
+ case $$MAKEFLAGS in \
+ *\\[\ \ ]*) \
+ echo 'am--echo: ; @echo "AM" OK' | $(MAKE) -f - 2>/dev/null \
+ | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+ *) \
+ for am__flg in $$MAKEFLAGS; do \
+ case $$am__flg in \
+ *=*|--*) ;; \
+ *n*) am__dry=yes; break;; \
+ esac; \
+ done;; \
+ esac; \
+ test $$am__dry = yes; \
+ }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = sqlite3$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+ $(srcdir)/sqlite3.pc.in $(top_srcdir)/configure INSTALL \
+ config.guess config.sub depcomp install-sh ltmain.sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = sqlite3.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+ *) f=$$p;; \
+ esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+ test -z "$$files" \
+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+ $(am__cd) "$$dir" && rm -f $$files; }; \
+ }
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \
+ "$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libsqlite3_la_LIBADD =
+am_libsqlite3_la_OBJECTS = sqlite3.lo
+libsqlite3_la_OBJECTS = $(am_libsqlite3_la_OBJECTS)
+libsqlite3_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+ $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+ $(libsqlite3_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_sqlite3_OBJECTS = sqlite3-shell.$(OBJEXT) sqlite3-sqlite3.$(OBJEXT)
+sqlite3_OBJECTS = $(am_sqlite3_OBJECTS)
+sqlite3_DEPENDENCIES =
+sqlite3_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(sqlite3_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+ $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+ --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+ $(LDFLAGS) -o $@
+SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
+DIST_SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
+am__can_run_installinfo = \
+ case $$AM_UPDATE_INFO_DIR in \
+ n|no|NO) false;; \
+ *) (install-info --version) >/dev/null 2>&1;; \
+ esac
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+DATA = $(pkgconfig_DATA)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ if test -d "$(distdir)"; then \
+ find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -rf "$(distdir)" \
+ || { sleep 5 && rm -rf "$(distdir)"; }; \
+ else :; fi
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
+ | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_CFLAGS = @BUILD_CFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_EXTENSION_FLAGS = @DYNAMIC_EXTENSION_FLAGS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/README
^
|
| @@ -0,0 +1,32 @@
+
+This package contains:
+
+ * the SQLite library amalgamation (single file) source code distribution,
+ * the shell.c file used to build the sqlite3 shell too, and
+ * the sqlite3.h and sqlite3ext.h header files required to link programs
+ and sqlite extensions against the installed libary.
+ * autoconf/automake installation infrastucture.
+
+The generic installation instructions for autoconf/automake are found
+in the INSTALL file.
+
+The following SQLite specific boolean options are supported:
+
+ --enable-readline use readline in shell tool [default=yes]
+ --enable-threadsafe build a thread-safe library [default=yes]
+ --enable-dynamic-extensions support loadable extensions [default=yes]
+
+The default value for the CFLAGS variable (options passed to the C
+compiler) includes debugging symbols in the build, resulting in larger
+binaries than are necessary. Override it on the configure command
+line like this:
+
+ $ CFLAGS="-Os" ./configure
+
+to produce a smaller installation footprint.
+
+Other SQLite compilation parameters can also be set using CFLAGS. For
+example:
+
+ $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure
+
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/aclocal.m4
^
|
| @@ -0,0 +1,9558 @@
+# generated automatically by aclocal 1.11.5 -*- Autoconf -*-
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
+# 2005, 2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation,
+# Inc.
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+m4_ifndef([AC_AUTOCONF_VERSION],
+ [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
+m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
+[m4_warning([this file was generated for autoconf 2.69.
+You have another version of autoconf. It may work, but is not guaranteed to.
+If you have problems, you may need to regenerate the build system entirely.
+To do so, use the procedure documented by the package, typically `autoreconf'.])])
+
+# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
+#
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is free software; the Free Software Foundation gives
+# unlimited permission to copy and/or distribute it, with or without
+# modifications, as long as this notice is preserved.
+
+m4_define([_LT_COPYING], [dnl
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
+# 2006, 2007, 2008, 2009, 2010, 2011 Free Software
+# Foundation, Inc.
+# Written by Gordon Matzigkeit, 1996
+#
+# This file is part of GNU Libtool.
+#
+# GNU Libtool is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html, or
+# obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+])
+
+# serial 57 LT_INIT
+
+
+# LT_PREREQ(VERSION)
+# ------------------
+# Complain and exit if this libtool version is less that VERSION.
+m4_defun([LT_PREREQ],
+[m4_if(m4_version_compare(m4_defn([LT_PACKAGE_VERSION]), [$1]), -1,
+ [m4_default([$3],
+ [m4_fatal([Libtool version $1 or higher is required],
+ 63)])],
+ [$2])])
+
+
+# _LT_CHECK_BUILDDIR
+# ------------------
+# Complain if the absolute build directory name contains unusual characters
+m4_defun([_LT_CHECK_BUILDDIR],
+[case `pwd` in
+ *\ * | *\ *)
+ AC_MSG_WARN([Libtool does not cope well with whitespace in `pwd`]) ;;
+esac
+])
+
+
+# LT_INIT([OPTIONS])
+# ------------------
+AC_DEFUN([LT_INIT],
+[AC_PREREQ([2.58])dnl We use AC_INCLUDES_DEFAULT
+AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT])dnl
+AC_BEFORE([$0], [LT_LANG])dnl
+AC_BEFORE([$0], [LT_OUTPUT])dnl
+AC_BEFORE([$0], [LTDL_INIT])dnl
+m4_require([_LT_CHECK_BUILDDIR])dnl
+
+dnl Autoconf doesn't catch unexpanded LT_ macros by default:
+m4_pattern_forbid([^_?LT_[A-Z_]+$])dnl
+m4_pattern_allow([^(_LT_EOF|LT_DLGLOBAL|LT_DLLAZY_OR_NOW|LT_MULTI_MODULE)$])dnl
+dnl aclocal doesn't pull ltoptions.m4, ltsugar.m4, or ltversion.m4
+dnl unless we require an AC_DEFUNed macro:
+AC_REQUIRE([LTOPTIONS_VERSION])dnl
+AC_REQUIRE([LTSUGAR_VERSION])dnl
+AC_REQUIRE([LTVERSION_VERSION])dnl
+AC_REQUIRE([LTOBSOLETE_VERSION])dnl
+m4_require([_LT_PROG_LTMAIN])dnl
+
+_LT_SHELL_INIT([SHELL=${CONFIG_SHELL-/bin/sh}])
+
+dnl Parse OPTIONS
+_LT_SET_OPTIONS([$0], [$1])
+
+# This can be used to rebuild libtool when needed
+LIBTOOL_DEPS="$ltmain"
+
+# Always use our own libtool.
+LIBTOOL='$(SHELL) $(top_builddir)/libtool'
+AC_SUBST(LIBTOOL)dnl
+
+_LT_SETUP
+
+# Only expand once:
+m4_define([LT_INIT])
+])# LT_INIT
+
+# Old names:
+AU_ALIAS([AC_PROG_LIBTOOL], [LT_INIT])
+AU_ALIAS([AM_PROG_LIBTOOL], [LT_INIT])
+dnl aclocal-1.4 backwards compatibility:
+dnl AC_DEFUN([AC_PROG_LIBTOOL], [])
+dnl AC_DEFUN([AM_PROG_LIBTOOL], [])
+
+
+# _LT_CC_BASENAME(CC)
+# -------------------
+# Calculate cc_basename. Skip known compiler wrappers and cross-prefix.
+m4_defun([_LT_CC_BASENAME],
+[for cc_temp in $1""; do
+ case $cc_temp in
+ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;;
+ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;;
+ \-*) ;;
+ *) break;;
+ esac
+done
+cc_basename=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
+])
+
+
+# _LT_FILEUTILS_DEFAULTS
+# ----------------------
+# It is okay to use these file commands and assume they have been set
+# sensibly after `m4_require([_LT_FILEUTILS_DEFAULTS])'.
+m4_defun([_LT_FILEUTILS_DEFAULTS],
+[: ${CP="cp -f"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+])# _LT_FILEUTILS_DEFAULTS
+
+
+# _LT_SETUP
+# ---------
+m4_defun([_LT_SETUP],
+[AC_REQUIRE([AC_CANONICAL_HOST])dnl
+AC_REQUIRE([AC_CANONICAL_BUILD])dnl
+AC_REQUIRE([_LT_PREPARE_SED_QUOTE_VARS])dnl
+AC_REQUIRE([_LT_PROG_ECHO_BACKSLASH])dnl
+
+_LT_DECL([], [PATH_SEPARATOR], [1], [The PATH separator for the build system])dnl
+dnl
+_LT_DECL([], [host_alias], [0], [The host system])dnl
+_LT_DECL([], [host], [0])dnl
+_LT_DECL([], [host_os], [0])dnl
+dnl
+_LT_DECL([], [build_alias], [0], [The build system])dnl
+_LT_DECL([], [build], [0])dnl
+_LT_DECL([], [build_os], [0])dnl
+dnl
+AC_REQUIRE([AC_PROG_CC])dnl
+AC_REQUIRE([LT_PATH_LD])dnl
+AC_REQUIRE([LT_PATH_NM])dnl
+dnl
+AC_REQUIRE([AC_PROG_LN_S])dnl
+test -z "$LN_S" && LN_S="ln -s"
+_LT_DECL([], [LN_S], [1], [Whether we need soft or hard links])dnl
+dnl
+AC_REQUIRE([LT_CMD_MAX_LEN])dnl
+_LT_DECL([objext], [ac_objext], [0], [Object file suffix (normally "o")])dnl
+_LT_DECL([], [exeext], [0], [Executable file suffix (normally "")])dnl
+dnl
+m4_require([_LT_FILEUTILS_DEFAULTS])dnl
+m4_require([_LT_CHECK_SHELL_FEATURES])dnl
+m4_require([_LT_PATH_CONVERSION_FUNCTIONS])dnl
+m4_require([_LT_CMD_RELOAD])dnl
+m4_require([_LT_CHECK_MAGIC_METHOD])dnl
+m4_require([_LT_CHECK_SHAREDLIB_FROM_LINKLIB])dnl
+m4_require([_LT_CMD_OLD_ARCHIVE])dnl
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/config.guess
^
|
| @@ -0,0 +1,1530 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner. Please send patches (context
+# diff format) to <config-patches@gnu.org> and include a ChangeLog
+# entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ sh5el) machine=sh5le-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep -q __ELF__
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/config.sub
^
|
| @@ -0,0 +1,1773 @@
+#! /bin/sh
+# Configuration validation subroutine script.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+timestamp='2012-02-10'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine. It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, see <http://www.gnu.org/licenses/>.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted GNU ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# You can get the latest version of this script from:
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support. The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+ $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit ;;
+ --version | -v )
+ echo "$version" ; exit ;;
+ --help | --h* | -h )
+ echo "$usage"; exit ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help"
+ exit 1 ;;
+
+ *local*)
+ # First pass through any local machine types.
+ echo $1
+ exit ;;
+
+ * )
+ break ;;
+ esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+ exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+ exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+ nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
+ linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
+ knetbsd*-gnu* | netbsd*-gnu* | \
+ kopensolaris*-gnu* | \
+ storm-chaos* | os2-emx* | rtmk-nova*)
+ os=-$maybe_os
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+ ;;
+ android-linux)
+ os=-linux-android
+ basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`-unknown
+ ;;
+ *)
+ basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+ if [ $basic_machine != $1 ]
+ then os=`echo $1 | sed 's/.*-/-/'`
+ else os=; fi
+ ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work. We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+ -sun*os*)
+ # Prevent following clause from handling this invalid input.
+ ;;
+ -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+ -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+ -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+ -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+ -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+ -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+ -apple | -axis | -knuth | -cray | -microblaze)
+ os=
+ basic_machine=$1
+ ;;
+ -bluegene*)
+ os=-cnk
+ ;;
+ -sim | -cisco | -oki | -wec | -winbond)
+ os=
+ basic_machine=$1
+ ;;
+ -scout)
+ ;;
+ -wrs)
+ os=-vxworks
+ basic_machine=$1
+ ;;
+ -chorusos*)
+ os=-chorusos
+ basic_machine=$1
+ ;;
+ -chorusrdb)
+ os=-chorusrdb
+ basic_machine=$1
+ ;;
+ -hiux*)
+ os=-hiuxwe2
+ ;;
+ -sco6)
+ os=-sco5v6
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco5)
+ os=-sco3.2v5
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco4)
+ os=-sco3.2v4
+ basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+ ;;
+ -sco3.2.[4-9]*)
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/configure
^
|
| @@ -0,0 +1,14846 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for sqlite 3.8.11.1.
+#
+# Report bugs to <http://www.sqlite.org>.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/configure.ac
^
|
| @@ -0,0 +1,108 @@
+
+#-----------------------------------------------------------------------
+# Supports the following non-standard switches.
+#
+# --enable-threadsafe
+# --enable-readline
+# --enable-dynamic-extensions
+#
+
+AC_PREREQ(2.61)
+AC_INIT(sqlite, 3.8.11.1, http://www.sqlite.org)
+AC_CONFIG_SRCDIR([sqlite3.c])
+
+# Use automake.
+AM_INIT_AUTOMAKE([foreign])
+
+AC_SYS_LARGEFILE
+
+# Check for required programs.
+AC_PROG_CC
+AC_PROG_RANLIB
+AC_PROG_LIBTOOL
+AC_PROG_MKDIR_P
+
+# Check for library functions that SQLite can optionally use.
+AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
+AC_FUNC_STRERROR_R
+
+AC_CONFIG_FILES([Makefile sqlite3.pc])
+AC_SUBST(BUILD_CFLAGS)
+
+#-----------------------------------------------------------------------
+# --enable-readline
+#
+AC_ARG_ENABLE(readline, [AS_HELP_STRING(
+ [--enable-readline],
+ [use readline in shell tool (yes, no) [default=yes]])],
+ [], [enable_readline=yes])
+if test x"$enable_readline" != xno ; then
+ sLIBS=$LIBS
+ LIBS=""
+ AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], [])
+ AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
+ AC_CHECK_FUNCS(readline, [], [])
+ READLINE_LIBS=$LIBS
+ LIBS=$sLIBS
+fi
+AC_SUBST(READLINE_LIBS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# --enable-threadsafe
+#
+AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
+ [--enable-threadsafe], [build a thread-safe library [default=yes]])],
+ [], [enable_threadsafe=yes])
+THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
+if test x"$enable_threadsafe" != "xno"; then
+ THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
+ AC_SEARCH_LIBS(pthread_create, pthread)
+fi
+AC_SUBST(THREADSAFE_FLAGS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# --enable-dynamic-extensions
+#
+AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
+ [--enable-dynamic-extensions], [support loadable extensions [default=yes]])],
+ [], [enable_dynamic_extensions=yes])
+if test x"$enable_dynamic_extensions" != "xno"; then
+ AC_SEARCH_LIBS(dlopen, dl)
+else
+ DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
+fi
+AC_MSG_CHECKING([for whether to support dynamic extensions])
+AC_MSG_RESULT($enable_dynamic_extensions)
+AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
+#-----------------------------------------------------------------------
+
+AC_CHECK_FUNCS(posix_fallocate)
+
+#-----------------------------------------------------------------------
+# UPDATE: Maybe it's better if users just set CFLAGS before invoking
+# configure. This option doesn't really add much...
+#
+# --enable-tempstore
+#
+# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
+# [--enable-tempstore],
+# [in-memory temporary tables (never, no, yes, always) [default=no]])],
+# [], [enable_tempstore=no])
+# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
+# case "$enable_tempstore" in
+# never ) TEMP_STORE=0 ;;
+# no ) TEMP_STORE=1 ;;
+# always ) TEMP_STORE=3 ;;
+# yes ) TEMP_STORE=3 ;;
+# * )
+# TEMP_STORE=1
+# enable_tempstore=yes
+# ;;
+# esac
+# AC_MSG_RESULT($enable_tempstore)
+# AC_SUBST(TEMP_STORE)
+#-----------------------------------------------------------------------
+
+AC_OUTPUT
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/depcomp
^
|
| @@ -0,0 +1,708 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2012-03-27.16; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
+# 2011, 2012 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+ '')
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
+ -h | --h*)
+ cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+ depmode Dependency tracking mode.
+ source Source file read by 'PROGRAMS ARGS'.
+ object Object file output by 'PROGRAMS ARGS'.
+ DEPDIR directory where to store dependencies.
+ depfile Dependency file to output.
+ tmpdepfile Temporary file to use when outputting dependencies.
+ libtool Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+ exit $?
+ ;;
+ -v | --v*)
+ echo "depcomp $scriptversion"
+ exit $?
+ ;;
+esac
+
+# A tabulation character.
+tab=' '
+# A newline character.
+nl='
+'
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+ echo "depcomp: Variables source, object and depmode must be set" 1>&2
+ exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags. We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write. Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+ # HP compiler uses -M and no extra arg.
+ gccflag=-M
+ depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want. Yay! Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff. Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am. Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+ for arg
+ do
+ case $arg in
+ -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+ *) set fnord "$@" "$arg" ;;
+ esac
+ shift # fnord
+ shift # $arg
+ done
+ "$@"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ mv "$tmpdepfile" "$depfile"
+ ;;
+
+gcc)
+## There are various ways to get dependency output from gcc. Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+## up in a subdir. Having to rename by hand is ugly.
+## (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+## -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+## than renaming).
+ if test -z "$gccflag"; then
+ gccflag=-MD,
+ fi
+ "$@" -Wp,"$gccflag$tmpdepfile"
+ stat=$?
+ if test $stat -eq 0; then :
+ else
+ rm -f "$tmpdepfile"
+ exit $stat
+ fi
+ rm -f "$depfile"
+ echo "$object : \\" > "$depfile"
+ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+ sed -e 's/^[^:]*: / /' \
+ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header). We avoid this by adding
+## dummy dependencies for each header file. Too bad gcc doesn't do
+## this for us directly.
+ tr ' ' "$nl" < "$tmpdepfile" |
+## Some versions of gcc put a space before the ':'. On the theory
+## that the space means something, we add a space to the output as
+## well. hp depmode also adds that space, but also prefixes the VPATH
+## to the object. Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly. Breaking it into two sed invocations is a workaround.
+ sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
+ rm -f "$tmpdepfile"
+ ;;
+
+hp)
+ # This case exists only to let depend.m4 do its work. It works by
+ # looking at the text of this script. This case will never be run,
+ # since it is checked for above.
+ exit 1
+ ;;
+
+sgi)
+ if test "$libtool" = yes; then
+ "$@" "-Wp,-MDupdate,$tmpdepfile"
+ else
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/install-sh
^
|
| @@ -0,0 +1,527 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-01-19.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -t) dst_arg=$2
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ # Protect names problematic for `test' and other utilities.
+ case $dst_arg in
+ -* | [=\(\)!]) dst_arg=./$dst_arg;;
+ esac
+ done
+fi
+
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/ltmain.sh
^
|
| @@ -0,0 +1,9655 @@
+
+# libtool (GNU libtool) 2.4.2
+# Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
+
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+# This is free software; see the source for copying conditions. There is NO
+# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+
+# GNU Libtool is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# As a special exception to the GNU General Public License,
+# if you distribute this file as part of a program or library that
+# is built using GNU Libtool, you may include this file under the
+# same distribution terms that you use for the rest of that program.
+#
+# GNU Libtool is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Libtool; see the file COPYING. If not, a copy
+# can be downloaded from http://www.gnu.org/licenses/gpl.html,
+# or obtained by writing to the Free Software Foundation, Inc.,
+# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+# Usage: $progname [OPTION]... [MODE-ARG]...
+#
+# Provide generalized library-building support services.
+#
+# --config show all configuration variables
+# --debug enable verbose shell tracing
+# -n, --dry-run display commands without modifying any files
+# --features display basic configuration information and exit
+# --mode=MODE use operation mode MODE
+# --preserve-dup-deps don't remove duplicate dependency libraries
+# --quiet, --silent don't print informational messages
+# --no-quiet, --no-silent
+# print informational messages (default)
+# --no-warn don't display warning messages
+# --tag=TAG use configuration variables from tag TAG
+# -v, --verbose print more informational messages than default
+# --no-verbose don't print the extra informational messages
+# --version print version information
+# -h, --help, --help-all print short, long, or detailed help message
+#
+# MODE must be one of the following:
+#
+# clean remove files from the build directory
+# compile compile a source file into a libtool object
+# execute automatically set library path, then run a program
+# finish complete the installation of libtool libraries
+# install install libraries or executables
+# link create a library or an executable
+# uninstall remove libraries from an installed directory
+#
+# MODE-ARGS vary depending on the MODE. When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
+# Try `$progname --help --mode=MODE' for a more detailed description of MODE.
+#
+# When reporting a bug, please describe a test case to reproduce it and
+# include the following information:
+#
+# host-triplet: $host
+# shell: $SHELL
+# compiler: $LTCC
+# compiler flags: $LTCFLAGS
+# linker: $LD (gnu? $with_gnu_ld)
+# $progname: (GNU libtool) 2.4.2
+# automake: $automake_version
+# autoconf: $autoconf_version
+#
+# Report bugs to <bug-libtool@gnu.org>.
+# GNU libtool home page: <http://www.gnu.org/software/libtool/>.
+# General help using GNU software: <http://www.gnu.org/gethelp/>.
+
+PROGRAM=libtool
+PACKAGE=libtool
+VERSION=2.4.2
+TIMESTAMP=""
+package_revision=1.3337
+
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+ emulate sh
+ NULLCMD=:
+ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+ eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
+# NLS nuisances: We save the old values to restore during execute mode.
+lt_user_locale=
+lt_safe_locale=
+for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
+do
+ eval "if test \"\${$lt_var+set}\" = set; then
+ save_$lt_var=\$$lt_var
+ $lt_var=C
+ export $lt_var
+ lt_user_locale=\"$lt_var=\\\$save_\$lt_var; \$lt_user_locale\"
+ lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
+ fi"
+done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
+
+$lt_unset CDPATH
+
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
+: ${CP="cp -f"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${MAKE="make"}
+: ${MKDIR="mkdir"}
+: ${MV="mv -f"}
+: ${RM="rm -f"}
+: ${SHELL="${CONFIG_SHELL-/bin/sh}"}
+: ${Xsed="$SED -e 1s/^X//"}
+
+# Global variables:
+EXIT_SUCCESS=0
+EXIT_FAILURE=1
+EXIT_MISMATCH=63 # $? = 63 is used to indicate version mismatch to missing.
+EXIT_SKIP=77 # $? = 77 is used to indicate a skipped test to automake.
+
+exit_status=$EXIT_SUCCESS
+
+# Make sure IFS has a sensible default
+lt_nl='
+'
+IFS=" $lt_nl"
+
+dirname="s,/[^/]*$,,"
+basename="s,^.*/,,"
+
+# func_dirname file append nondir_replacement
+# Compute the dirname of FILE. If nonempty, add APPEND to the result,
+# otherwise set result to NONDIR_REPLACEMENT.
+func_dirname ()
+{
+ func_dirname_result=`$ECHO "${1}" | $SED "$dirname"`
+ if test "X$func_dirname_result" = "X${1}"; then
+ func_dirname_result="${3}"
+ else
+ func_dirname_result="$func_dirname_result${2}"
+ fi
+} # func_dirname may be replaced by extended shell implementation
+
+
+# func_basename file
+func_basename ()
+{
+ func_basename_result=`$ECHO "${1}" | $SED "$basename"`
+} # func_basename may be replaced by extended shell implementation
+
+
+# func_dirname_and_basename file append nondir_replacement
+# perform func_basename and func_dirname in a single function
+# call:
+# dirname: Compute the dirname of FILE. If nonempty,
+# add APPEND to the result, otherwise set result
+# to NONDIR_REPLACEMENT.
+# value returned in "$func_dirname_result"
+# basename: Compute filename of FILE.
+# value retuned in "$func_basename_result"
+# Implementation must be kept synchronized with func_dirname
+# and func_basename. For efficiency, we do not delegate to
+# those functions but instead duplicate the functionality here.
+func_dirname_and_basename ()
+{
+ # Extract subdirectory from the argument.
+ func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/missing
^
|
| @@ -0,0 +1,331 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2012-01-06.13; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009, 2010, 2011, 2012 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+ configure_ac=configure.ac
+else
+ configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+ # Try to run requested program, and just exit if it succeeds.
+ run=
+ shift
+ "$@" && exit 0
+ # Exit code 63 means version mismatch. This often happens
+ # when the user try to use an ancient version of a tool on
+ # a file that requires a minimum version. In this case we
+ # we should proceed has if the program had been absent, or
+ # if --run hadn't been passed.
+ if test $? = 63; then
+ run=:
+ msg="probably too old"
+ fi
+ ;;
+
+ -h|--h|--he|--hel|--help)
+ echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+ -h, --help display this help and exit
+ -v, --version output version information and exit
+ --run try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+ aclocal touch file \`aclocal.m4'
+ autoconf touch file \`configure'
+ autoheader touch file \`config.h.in'
+ autom4te touch the output file, or create a stub one
+ automake touch all \`Makefile.in' files
+ bison create \`y.tab.[ch]', if possible, from existing .[ch]
+ flex create \`lex.yy.c', if possible, from existing .c
+ help2man touch the output file
+ lex create \`lex.yy.c', if possible, from existing .c
+ makeinfo touch the output file
+ yacc create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+ exit $?
+ ;;
+
+ -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+ echo "missing $scriptversion (GNU Automake)"
+ exit $?
+ ;;
+
+ -*)
+ echo 1>&2 "$0: Unknown \`$1' option"
+ echo 1>&2 "Try \`$0 --help' for more information"
+ exit 1
+ ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+ s/^gnu-//; t
+ s/^gnu//; t
+ s/^g//; t'`
+
+# Now exit if we have it, but it failed. Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program). This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+ lex*|yacc*)
+ # Not GNU programs, they don't have --version.
+ ;;
+
+ *)
+ if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+ # We have it, but it failed.
+ exit 1
+ elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+ # Could not run --version or --help. This is probably someone
+ # running `$TOOL --version' or `$TOOL --help' to check whether
+ # $TOOL exists and not knowing $TOOL uses missing.
+ exit 1
+ fi
+ ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+ aclocal*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acinclude.m4' or \`${configure_ac}'. You might want
+ to install the \`Automake' and \`Perl' packages. Grab them from
+ any GNU archive site."
+ touch aclocal.m4
+ ;;
+
+ autoconf*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`${configure_ac}'. You might want to install the
+ \`Autoconf' and \`GNU m4' packages. Grab them from any GNU
+ archive site."
+ touch configure
+ ;;
+
+ autoheader*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`acconfig.h' or \`${configure_ac}'. You might want
+ to install the \`Autoconf' and \`GNU m4' packages. Grab them
+ from any GNU archive site."
+ files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+ test -z "$files" && files="config.h"
+ touch_files=
+ for f in $files; do
+ case $f in
+ *:*) touch_files="$touch_files "`echo "$f" |
+ sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+ *) touch_files="$touch_files $f.in";;
+ esac
+ done
+ touch $touch_files
+ ;;
+
+ automake*)
+ echo 1>&2 "\
+WARNING: \`$1' is $msg. You should only need it if
+ you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+ You might want to install the \`Automake' and \`Perl' packages.
+ Grab them from any GNU archive site."
+ find . -type f -name Makefile.am -print |
+ sed 's/\.am$/.in/' |
+ while read f; do touch "$f"; done
+ ;;
+
+ autom4te*)
+ echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+ You might have modified some files without having the
+ proper tools for further handling them.
+ You can get \`$1' as part of \`Autoconf' from any GNU
+ archive site."
+
+ file=`echo "$*" | sed -n "$sed_output"`
+ test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+ if test -f "$file"; then
+ touch $file
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/shell.c
^
|
| @@ -0,0 +1,4814 @@
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This file contains code to implement the "sqlite" command line
+** utility for accessing SQLite databases.
+*/
+#if (defined(_WIN32) || defined(WIN32)) && !defined(_CRT_SECURE_NO_WARNINGS)
+/* This needs to come before any includes for MSVC compiler */
+#define _CRT_SECURE_NO_WARNINGS
+#endif
+
+/*
+** If requested, include the SQLite compiler options file for MSVC.
+*/
+#if defined(INCLUDE_MSVC_H)
+#include "msvc.h"
+#endif
+
+/*
+** No support for loadable extensions in VxWorks.
+*/
+#if (defined(__RTP__) || defined(_WRS_KERNEL)) && !SQLITE_OMIT_LOAD_EXTENSION
+# define SQLITE_OMIT_LOAD_EXTENSION 1
+#endif
+
+/*
+** Enable large-file support for fopen() and friends on unix.
+*/
+#ifndef SQLITE_DISABLE_LFS
+# define _LARGE_FILE 1
+# ifndef _FILE_OFFSET_BITS
+# define _FILE_OFFSET_BITS 64
+# endif
+# define _LARGEFILE_SOURCE 1
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <assert.h>
+#include "sqlite3.h"
+#if SQLITE_USER_AUTHENTICATION
+# include "sqlite3userauth.h"
+#endif
+#include <ctype.h>
+#include <stdarg.h>
+
+#if !defined(_WIN32) && !defined(WIN32)
+# include <signal.h>
+# if !defined(__RTP__) && !defined(_WRS_KERNEL)
+# include <pwd.h>
+# endif
+# include <unistd.h>
+# include <sys/types.h>
+#endif
+
+#if HAVE_READLINE
+# include <readline/readline.h>
+# include <readline/history.h>
+#endif
+
+#if HAVE_EDITLINE
+# include <editline/readline.h>
+#endif
+
+#if HAVE_EDITLINE || HAVE_READLINE
+
+# define shell_add_history(X) add_history(X)
+# define shell_read_history(X) read_history(X)
+# define shell_write_history(X) write_history(X)
+# define shell_stifle_history(X) stifle_history(X)
+# define shell_readline(X) readline(X)
+
+#elif HAVE_LINENOISE
+
+# include "linenoise.h"
+# define shell_add_history(X) linenoiseHistoryAdd(X)
+# define shell_read_history(X) linenoiseHistoryLoad(X)
+# define shell_write_history(X) linenoiseHistorySave(X)
+# define shell_stifle_history(X) linenoiseHistorySetMaxLen(X)
+# define shell_readline(X) linenoise(X)
+
+#else
+
+# define shell_read_history(X)
+# define shell_write_history(X)
+# define shell_stifle_history(X)
+
+# define SHELL_USE_LOCAL_GETLINE 1
+#endif
+
+
+#if defined(_WIN32) || defined(WIN32)
+# include <io.h>
+# include <fcntl.h>
+# define isatty(h) _isatty(h)
+# ifndef access
+# define access(f,m) _access((f),(m))
+# endif
+# undef popen
+# define popen _popen
+# undef pclose
+# define pclose _pclose
+#else
+ /* Make sure isatty() has a prototype. */
+ extern int isatty(int);
+
+# if !defined(__RTP__) && !defined(_WRS_KERNEL)
+ /* popen and pclose are not C89 functions and so are
+ ** sometimes omitted from the <stdio.h> header */
+ extern FILE *popen(const char*,const char*);
+ extern int pclose(FILE*);
+# else
+# define SQLITE_OMIT_POPEN 1
+# endif
+#endif
+
+#if defined(_WIN32_WCE)
+/* Windows CE (arm-wince-mingw32ce-gcc) does not provide isatty()
+ * thus we always assume that we have a console. That can be
+ * overridden with the -batch command line option.
+ */
+#define isatty(x) 1
+#endif
+
+/* ctype macros that work with signed characters */
+#define IsSpace(X) isspace((unsigned char)X)
+#define IsDigit(X) isdigit((unsigned char)X)
+#define ToLower(X) (char)tolower((unsigned char)X)
+
+/* On Windows, we normally run with output mode of TEXT so that \n characters
+** are automatically translated into \r\n. However, this behavior needs
+** to be disabled in some cases (ex: when generating CSV output and when
+** rendering quoted strings that contain \n characters). The following
+** routines take care of that.
+*/
+#if defined(_WIN32) || defined(WIN32)
+static void setBinaryMode(FILE *out){
+ fflush(out);
+ _setmode(_fileno(out), _O_BINARY);
+}
+static void setTextMode(FILE *out){
+ fflush(out);
+ _setmode(_fileno(out), _O_TEXT);
+}
+#else
+# define setBinaryMode(X)
+# define setTextMode(X)
+#endif
+
+
+/* True if the timer is enabled */
+static int enableTimer = 0;
+
+/* Return the current wall-clock time */
+static sqlite3_int64 timeOfDay(void){
+ static sqlite3_vfs *clockVfs = 0;
+ sqlite3_int64 t;
+ if( clockVfs==0 ) clockVfs = sqlite3_vfs_find(0);
+ if( clockVfs->iVersion>=1 && clockVfs->xCurrentTimeInt64!=0 ){
+ clockVfs->xCurrentTimeInt64(clockVfs, &t);
+ }else{
+ double r;
+ clockVfs->xCurrentTime(clockVfs, &r);
+ t = (sqlite3_int64)(r*86400000.0);
+ }
+ return t;
+}
+
+#if !defined(_WIN32) && !defined(WIN32) && !defined(__minux)
+#include <sys/time.h>
+#include <sys/resource.h>
+
+/* VxWorks does not support getrusage() as far as we can determine */
+#if defined(_WRS_KERNEL) || defined(__RTP__)
+struct rusage {
+ struct timeval ru_utime; /* user CPU time used */
+ struct timeval ru_stime; /* system CPU time used */
+};
+#define getrusage(A,B) memset(B,0,sizeof(*B))
+#endif
+
+/* Saved resource information for the beginning of an operation */
+static struct rusage sBegin; /* CPU time at start */
+static sqlite3_int64 iBegin; /* Wall-clock time at start */
+
+/*
+** Begin timing an operation
+*/
+static void beginTimer(void){
+ if( enableTimer ){
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/sqlite3.1
^
|
| @@ -0,0 +1,286 @@
+.\" Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SQLITE3 1 "Fri Oct 31 10:41:31 EDT 2014"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh disable hyphenation
+.\" .hy enable hyphenation
+.\" .ad l left justify
+.\" .ad b justify to both left and right margins
+.\" .nf disable filling
+.\" .fi enable filling
+.\" .br insert line break
+.\" .sp <n> insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+.B sqlite3
+\- A command line interface for SQLite version 3
+
+.SH SYNOPSIS
+.B sqlite3
+.RI [ options ]
+.RI [ databasefile ]
+.RI [ SQL ]
+
+.SH SUMMARY
+.PP
+.B sqlite3
+is a terminal-based front-end to the SQLite library that can evaluate
+queries interactively and display the results in multiple formats.
+.B sqlite3
+can also be used within shell scripts and other applications to provide
+batch processing features.
+
+.SH DESCRIPTION
+To start a
+.B sqlite3
+interactive session, invoke the
+.B sqlite3
+command and optionally provide the name of a database file. If the
+database file does not exist, it will be created. If the database file
+does exist, it will be opened.
+
+For example, to create a new database file named "mydata.db", create
+a table named "memos" and insert a couple of records into that table:
+.sp
+$
+.B sqlite3 mydata.db
+.br
+SQLite version 3.8.8
+.br
+Enter ".help" for instructions
+.br
+sqlite>
+.B create table memos(text, priority INTEGER);
+.br
+sqlite>
+.B insert into memos values('deliver project description', 10);
+.br
+sqlite>
+.B insert into memos values('lunch with Christine', 100);
+.br
+sqlite>
+.B select * from memos;
+.br
+deliver project description|10
+.br
+lunch with Christine|100
+.br
+sqlite>
+.sp
+
+If no database name is supplied, the ATTACH sql command can be used
+to attach to existing or create new database files. ATTACH can also
+be used to attach to multiple databases within the same interactive
+session. This is useful for migrating data between databases,
+possibly changing the schema along the way.
+
+Optionally, a SQL statement or set of SQL statements can be supplied as
+a single argument. Multiple statements should be separated by
+semi-colons.
+
+For example:
+.sp
+$
+.B sqlite3 -line mydata.db 'select * from memos where priority > 20;'
+.br
+ text = lunch with Christine
+.br
+priority = 100
+.br
+.sp
+
+.SS SQLITE META-COMMANDS
+.PP
+The interactive interpreter offers a set of meta-commands that can be
+used to control the output format, examine the currently attached
+database files, or perform administrative operations upon the
+attached databases (such as rebuilding indices). Meta-commands are
+always prefixed with a dot (.).
+
+A list of available meta-commands can be viewed at any time by issuing
+the '.help' command. For example:
+.sp
+sqlite>
+.B .help
+.nf
+.tr %.
+%backup ?DB? FILE Backup DB (default "main") to FILE
+%bail on|off Stop after hitting an error. Default OFF
+%clone NEWDB Clone data into NEWDB from the existing database
+%databases List names and files of attached databases
+%dump ?TABLE? ... Dump the database in an SQL text format
+ If TABLE specified, only dump tables matching
+ LIKE pattern TABLE.
+%echo on|off Turn command echo on or off
+%eqp on|off Enable or disable automatic EXPLAIN QUERY PLAN
+%exit Exit this program
+%explain ?on|off? Turn output mode suitable for EXPLAIN on or off.
+ With no args, it turns EXPLAIN on.
+%fullschema Show schema and the content of sqlite_stat tables
+%headers on|off Turn display of headers on or off
+%help Show this message
+%import FILE TABLE Import data from FILE into TABLE
+%indices ?TABLE? Show names of all indices
+ If TABLE specified, only show indices for tables
+ matching LIKE pattern TABLE.
+%load FILE ?ENTRY? Load an extension library
+%log FILE|off Turn logging on or off. FILE can be stderr/stdout
+%mode MODE ?TABLE? Set output mode where MODE is one of:
+ csv Comma-separated values
+ column Left-aligned columns. (See .width)
+ html HTML <table> code
+ insert SQL insert statements for TABLE
+ line One value per line
+ list Values delimited by .separator string
+ tabs Tab-separated values
+ tcl TCL list elements
+%nullvalue STRING Use STRING in place of NULL values
+%once FILENAME Output for the next SQL command only to FILENAME
+%open ?FILENAME? Close existing database and reopen FILENAME
+%output ?FILENAME? Send output to FILENAME or stdout
+%print STRING... Print literal STRING
+%prompt MAIN CONTINUE Replace the standard prompts
+%quit Exit this program
+%read FILENAME Execute SQL in FILENAME
+%restore ?DB? FILE Restore content of DB (default "main") from FILE
+%save FILE Write in-memory database into FILE
+%schema ?TABLE? Show the CREATE statements
+ If TABLE specified, only show tables matching
+ LIKE pattern TABLE.
+%separator STRING ?NL? Change separator used by output mode and .import
+ NL is the end-of-line mark for CSV
+%shell CMD ARGS... Run CMD ARGS... in a system shell
+%show Show the current values for various settings
+%stats on|off Turn stats on or off
+%system CMD ARGS... Run CMD ARGS... in a system shell
+%tables ?TABLE? List names of tables
+ If TABLE specified, only list tables matching
+ LIKE pattern TABLE.
+%timeout MS Try opening locked tables for MS milliseconds
+%timer on|off Turn SQL timer on or off
+%trace FILE|off Output each SQL statement as it is run
+%vfsname ?AUX? Print the name of the VFS stack
+%width NUM1 NUM2 ... Set column widths for "column" mode
+ Negative values right-justify
+sqlite>
+.sp
+.fi
+.SH OPTIONS
+.B sqlite3
+has the following options:
+.TP
+.B \-bail
+Stop after hitting an error.
+.TP
+.B \-batch
+Force batch I/O.
+.TP
+.B \-column
+Query results will be displayed in a table like form, using
+whitespace characters to separate the columns and align the
+output.
+.TP
+.BI \-cmd\ command
+run
+.I command
+before reading stdin
+.TP
+.B \-csv
+Set output mode to CSV (comma separated values).
+.TP
+.B \-echo
+Print commands before execution.
+.TP
+.BI \-init\ file
+Read and execute commands from
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/sqlite3.c
^
|
| @@ -0,0 +1,161623 @@
+/******************************************************************************
+** This file is an amalgamation of many separate C source files from SQLite
+** version 3.8.11.1. By combining all the individual C code files into this
+** single large file, the entire code can be compiled as a single translation
+** unit. This allows many compilers to do optimizations that would not be
+** possible if the files were compiled separately. Performance improvements
+** of 5% or more are commonly seen when SQLite is compiled as a single
+** translation unit.
+**
+** This file is all you need to compile SQLite. To use SQLite in other
+** programs, you need this file and the "sqlite3.h" header file that defines
+** the programming interface to the SQLite library. (If you do not have
+** the "sqlite3.h" header file at hand, you will find a copy embedded within
+** the text of this file. Search for "Begin file sqlite3.h" to find the start
+** of the embedded sqlite3.h header file.) Additional code files may be needed
+** if you want a wrapper to interface SQLite with your choice of programming
+** language. The code for the "sqlite3" command-line shell is also in a
+** separate file. This file contains only code for the core SQLite library.
+*/
+#define SQLITE_CORE 1
+#define SQLITE_AMALGAMATION 1
+#ifndef SQLITE_PRIVATE
+# define SQLITE_PRIVATE static
+#endif
+/************** Begin file sqliteInt.h ***************************************/
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Internal interface definitions for SQLite.
+**
+*/
+#ifndef _SQLITEINT_H_
+#define _SQLITEINT_H_
+
+/*
+** Include the header file used to customize the compiler options for MSVC.
+** This should be done first so that it can successfully prevent spurious
+** compiler warnings due to subsequent content in this file and other files
+** that are included by this file.
+*/
+/************** Include msvc.h in the middle of sqliteInt.h ******************/
+/************** Begin file msvc.h ********************************************/
+/*
+** 2015 January 12
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains code that is specific to MSVC.
+*/
+#ifndef _MSVC_H_
+#define _MSVC_H_
+
+#if defined(_MSC_VER)
+#pragma warning(disable : 4054)
+#pragma warning(disable : 4055)
+#pragma warning(disable : 4100)
+#pragma warning(disable : 4127)
+#pragma warning(disable : 4130)
+#pragma warning(disable : 4152)
+#pragma warning(disable : 4189)
+#pragma warning(disable : 4206)
+#pragma warning(disable : 4210)
+#pragma warning(disable : 4232)
+#pragma warning(disable : 4244)
+#pragma warning(disable : 4305)
+#pragma warning(disable : 4306)
+#pragma warning(disable : 4702)
+#pragma warning(disable : 4706)
+#endif /* defined(_MSC_VER) */
+
+#endif /* _MSVC_H_ */
+
+/************** End of msvc.h ************************************************/
+/************** Continuing where we left off in sqliteInt.h ******************/
+
+/*
+** Special setup for VxWorks
+*/
+/************** Include vxworks.h in the middle of sqliteInt.h ***************/
+/************** Begin file vxworks.h *****************************************/
+/*
+** 2015-03-02
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+******************************************************************************
+**
+** This file contains code that is specific to Wind River's VxWorks
+*/
+#if defined(__RTP__) || defined(_WRS_KERNEL)
+/* This is VxWorks. Set up things specially for that OS
+*/
+#include <vxWorks.h>
+#include <pthread.h> /* amalgamator: dontcache */
+#define OS_VXWORKS 1
+#define SQLITE_OS_OTHER 0
+#define SQLITE_HOMEGROWN_RECURSIVE_MUTEX 1
+#define SQLITE_OMIT_LOAD_EXTENSION 1
+#define SQLITE_ENABLE_LOCKING_STYLE 0
+#define HAVE_UTIME 1
+#else
+/* This is not VxWorks. */
+#define OS_VXWORKS 0
+#endif /* defined(_WRS_KERNEL) */
+
+/************** End of vxworks.h *********************************************/
+/************** Continuing where we left off in sqliteInt.h ******************/
+
+/*
+** These #defines should enable >2GB file support on POSIX if the
+** underlying operating system supports it. If the OS lacks
+** large file support, or if the OS is windows, these should be no-ops.
+**
+** Ticket #2739: The _LARGEFILE_SOURCE macro must appear before any
+** system #includes. Hence, this block of code must be the very first
+** code in all source files.
+**
+** Large file support can be disabled using the -DSQLITE_DISABLE_LFS switch
+** on the compiler command line. This is necessary if you are compiling
+** on a recent machine (ex: Red Hat 7.2) but you want your code to work
+** on an older machine (ex: Red Hat 6.0). If you compile on Red Hat 7.2
+** without this option, LFS is enable. But LFS does not exist in the kernel
+** in Red Hat 6.0, so the code won't work. Hence, for maximum binary
+** portability you should omit LFS.
+**
+** The previous paragraph was written in 2005. (This paragraph is written
+** on 2008-11-28.) These days, all Linux kernels support large files, so
+** you should probably leave LFS enabled. But some embedded platforms might
+** lack LFS in which case the SQLITE_DISABLE_LFS macro might still be useful.
+**
+** Similar is true for Mac OS X. LFS is only supported on Mac OS X 9 and later.
+*/
+#ifndef SQLITE_DISABLE_LFS
+# define _LARGE_FILE 1
+# ifndef _FILE_OFFSET_BITS
+# define _FILE_OFFSET_BITS 64
+# endif
+# define _LARGEFILE_SOURCE 1
+#endif
+
+/* What version of GCC is being used. 0 means GCC is not being used */
+#ifdef __GNUC__
+# define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__)
+#else
+# define GCC_VERSION 0
+#endif
+
+/* Needed for various definitions... */
+#if defined(__GNUC__) && !defined(_GNU_SOURCE)
+# define _GNU_SOURCE
+#endif
+
+#if defined(__OpenBSD__) && !defined(_BSD_SOURCE)
+# define _BSD_SOURCE
+#endif
+
+/*
+** For MinGW, check to see if we can include the header file containing its
+** version information, among other things. Normally, this internal MinGW
+** header file would [only] be included automatically by other MinGW header
+** files; however, the contained version information is now required by this
+** header file to work around binary compatibility issues (see below) and
+** this is the only known way to reliably obtain it. This entire #if block
+** would be completely unnecessary if there was any other way of detecting
+** MinGW via their preprocessor (e.g. if they customized their GCC to define
+** some MinGW-specific macros). When compiling for MinGW, either the
+** _HAVE_MINGW_H or _HAVE__MINGW_H (note the extra underscore) macro must be
+** defined; otherwise, detection of conditions specific to MinGW will be
+** disabled.
+*/
+#if defined(_HAVE_MINGW_H)
+# include "mingw.h"
+#elif defined(_HAVE__MINGW_H)
+# include "_mingw.h"
+#endif
+
+/*
+** For MinGW version 4.x (and higher), check to see if the _USE_32BIT_TIME_T
+** define is required to maintain binary compatibility with the MSVC runtime
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/sqlite3.h
^
|
| @@ -0,0 +1,7860 @@
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This header file defines the interface that the SQLite library
+** presents to client programs. If a C-function, structure, datatype,
+** or constant definition does not appear in this file, then it is
+** not a published API of SQLite, is subject to change without
+** notice, and should not be referenced by programs that use SQLite.
+**
+** Some of the definitions that are in this file are marked as
+** "experimental". Experimental interfaces are normally new
+** features recently added to SQLite. We do not anticipate changes
+** to experimental interfaces but reserve the right to make minor changes
+** if experience from use "in the wild" suggest such changes are prudent.
+**
+** The official C-language API documentation for SQLite is derived
+** from comments in this file. This file is the authoritative source
+** on how SQLite interfaces are supposed to operate.
+**
+** The name of this file under configuration management is "sqlite.h.in".
+** The makefile makes some minor changes to this file (such as inserting
+** the version number) and changes its name to "sqlite3.h" as
+** part of the build process.
+*/
+#ifndef _SQLITE3_H_
+#define _SQLITE3_H_
+#include <stdarg.h> /* Needed for the definition of va_list */
+
+/*
+** Make sure we can call this stuff from C++.
+*/
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+
+/*
+** Provide the ability to override linkage features of the interface.
+*/
+#ifndef SQLITE_EXTERN
+# define SQLITE_EXTERN extern
+#endif
+#ifndef SQLITE_API
+# define SQLITE_API
+#endif
+#ifndef SQLITE_CDECL
+# define SQLITE_CDECL
+#endif
+#ifndef SQLITE_STDCALL
+# define SQLITE_STDCALL
+#endif
+
+/*
+** These no-op macros are used in front of interfaces to mark those
+** interfaces as either deprecated or experimental. New applications
+** should not use deprecated interfaces - they are supported for backwards
+** compatibility only. Application writers should be aware that
+** experimental interfaces are subject to change in point releases.
+**
+** These macros used to resolve to various kinds of compiler magic that
+** would generate warning messages when they were used. But that
+** compiler magic ended up generating such a flurry of bug reports
+** that we have taken it all out and gone back to using simple
+** noop macros.
+*/
+#define SQLITE_DEPRECATED
+#define SQLITE_EXPERIMENTAL
+
+/*
+** Ensure these symbols were not defined by some previous header file.
+*/
+#ifdef SQLITE_VERSION
+# undef SQLITE_VERSION
+#endif
+#ifdef SQLITE_VERSION_NUMBER
+# undef SQLITE_VERSION_NUMBER
+#endif
+
+/*
+** CAPI3REF: Compile-Time Library Version Numbers
+**
+** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
+** evaluates to a string literal that is the SQLite version in the
+** format "X.Y.Z" where X is the major version number (always 3 for
+** SQLite3) and Y is the minor version number and Z is the release number.)^
+** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
+** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
+** numbers used in [SQLITE_VERSION].)^
+** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
+** be larger than the release from which it is derived. Either Y will
+** be held constant and Z will be incremented or else Y will be incremented
+** and Z will be reset to zero.
+**
+** Since version 3.6.18, SQLite source code has been stored in the
+** <a href="http://www.fossil-scm.org/">Fossil configuration management
+** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to
+** a string which identifies a particular check-in of SQLite
+** within its configuration management system. ^The SQLITE_SOURCE_ID
+** string contains the date and time of the check-in (UTC) and an SHA1
+** hash of the entire source tree.
+**
+** See also: [sqlite3_libversion()],
+** [sqlite3_libversion_number()], [sqlite3_sourceid()],
+** [sqlite_version()] and [sqlite_source_id()].
+*/
+#define SQLITE_VERSION "3.8.11.1"
+#define SQLITE_VERSION_NUMBER 3008011
+#define SQLITE_SOURCE_ID "2015-07-29 20:00:57 cf538e2783e468bbc25e7cb2a9ee64d3e0e80b2f"
+
+/*
+** CAPI3REF: Run-Time Library Version Numbers
+** KEYWORDS: sqlite3_version, sqlite3_sourceid
+**
+** These interfaces provide the same information as the [SQLITE_VERSION],
+** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
+** but are associated with the library instead of the header file. ^(Cautious
+** programmers might include assert() statements in their application to
+** verify that values returned by these interfaces match the macros in
+** the header, and thus insure that the application is
+** compiled with matching library and header files.
+**
+** <blockquote><pre>
+** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
+** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
+** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
+** </pre></blockquote>)^
+**
+** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
+** macro. ^The sqlite3_libversion() function returns a pointer to the
+** to the sqlite3_version[] string constant. The sqlite3_libversion()
+** function is provided for use in DLLs since DLL users usually do not have
+** direct access to string constants within the DLL. ^The
+** sqlite3_libversion_number() function returns an integer equal to
+** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns
+** a pointer to a string constant whose value is the same as the
+** [SQLITE_SOURCE_ID] C preprocessor macro.
+**
+** See also: [sqlite_version()] and [sqlite_source_id()].
+*/
+SQLITE_API SQLITE_EXTERN const char sqlite3_version[];
+SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
+SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
+SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
+
+/*
+** CAPI3REF: Run-Time Library Compilation Options Diagnostics
+**
+** ^The sqlite3_compileoption_used() function returns 0 or 1
+** indicating whether the specified option was defined at
+** compile time. ^The SQLITE_ prefix may be omitted from the
+** option name passed to sqlite3_compileoption_used().
+**
+** ^The sqlite3_compileoption_get() function allows iterating
+** over the list of options that were defined at compile time by
+** returning the N-th compile time option string. ^If N is out of range,
+** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
+** prefix is omitted from any strings returned by
+** sqlite3_compileoption_get().
+**
+** ^Support for the diagnostic functions sqlite3_compileoption_used()
+** and sqlite3_compileoption_get() may be omitted by specifying the
+** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
+**
+** See also: SQL functions [sqlite_compileoption_used()] and
+** [sqlite_compileoption_get()] and the [compile_options pragma].
+*/
+#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
+SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
+SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
+#endif
+
+/*
+** CAPI3REF: Test To See If The Library Is Threadsafe
+**
+** ^The sqlite3_threadsafe() function returns zero if and only if
+** SQLite was compiled with mutexing code omitted due to the
+** [SQLITE_THREADSAFE] compile-time option being set to 0.
+**
+** SQLite can be compiled with or without mutexes. When
+** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
+** are enabled and SQLite is threadsafe. When the
+** [SQLITE_THREADSAFE] macro is 0,
+** the mutexes are omitted. Without the mutexes, it is not safe
+** to use SQLite concurrently from more than one thread.
+**
+** Enabling mutexes incurs a measurable performance penalty.
+** So if speed is of utmost importance, it makes sense to disable
+** the mutexes. But for maximum safety, mutexes should be enabled.
+** ^The default behavior is for mutexes to be enabled.
+**
+** This interface can be used by an application to make sure that the
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/sqlite3.pc.in
^
|
| @@ -0,0 +1,13 @@
+# Package Information for pkg-config
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: SQLite
+Description: SQL database engine
+Version: @PACKAGE_VERSION@
+Libs: -L${libdir} -lsqlite3
+Libs.private: @LIBS@
+Cflags: -I${includedir}
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/sqlite3ext.h
^
|
| @@ -0,0 +1,527 @@
+/*
+** 2006 June 7
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This header file defines the SQLite interface for use by
+** shared libraries that want to be imported as extensions into
+** an SQLite instance. Shared libraries that intend to be loaded
+** as extensions by SQLite should #include this file instead of
+** sqlite3.h.
+*/
+#ifndef _SQLITE3EXT_H_
+#define _SQLITE3EXT_H_
+#include "sqlite3.h"
+
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
+/*
+** The following structure holds pointers to all of the SQLite API
+** routines.
+**
+** WARNING: In order to maintain backwards compatibility, add new
+** interfaces to the end of this structure only. If you insert new
+** interfaces in the middle of this structure, then older different
+** versions of SQLite will not be able to load each other's shared
+** libraries!
+*/
+struct sqlite3_api_routines {
+ void * (*aggregate_context)(sqlite3_context*,int nBytes);
+ int (*aggregate_count)(sqlite3_context*);
+ int (*bind_blob)(sqlite3_stmt*,int,const void*,int n,void(*)(void*));
+ int (*bind_double)(sqlite3_stmt*,int,double);
+ int (*bind_int)(sqlite3_stmt*,int,int);
+ int (*bind_int64)(sqlite3_stmt*,int,sqlite_int64);
+ int (*bind_null)(sqlite3_stmt*,int);
+ int (*bind_parameter_count)(sqlite3_stmt*);
+ int (*bind_parameter_index)(sqlite3_stmt*,const char*zName);
+ const char * (*bind_parameter_name)(sqlite3_stmt*,int);
+ int (*bind_text)(sqlite3_stmt*,int,const char*,int n,void(*)(void*));
+ int (*bind_text16)(sqlite3_stmt*,int,const void*,int,void(*)(void*));
+ int (*bind_value)(sqlite3_stmt*,int,const sqlite3_value*);
+ int (*busy_handler)(sqlite3*,int(*)(void*,int),void*);
+ int (*busy_timeout)(sqlite3*,int ms);
+ int (*changes)(sqlite3*);
+ int (*close)(sqlite3*);
+ int (*collation_needed)(sqlite3*,void*,void(*)(void*,sqlite3*,
+ int eTextRep,const char*));
+ int (*collation_needed16)(sqlite3*,void*,void(*)(void*,sqlite3*,
+ int eTextRep,const void*));
+ const void * (*column_blob)(sqlite3_stmt*,int iCol);
+ int (*column_bytes)(sqlite3_stmt*,int iCol);
+ int (*column_bytes16)(sqlite3_stmt*,int iCol);
+ int (*column_count)(sqlite3_stmt*pStmt);
+ const char * (*column_database_name)(sqlite3_stmt*,int);
+ const void * (*column_database_name16)(sqlite3_stmt*,int);
+ const char * (*column_decltype)(sqlite3_stmt*,int i);
+ const void * (*column_decltype16)(sqlite3_stmt*,int);
+ double (*column_double)(sqlite3_stmt*,int iCol);
+ int (*column_int)(sqlite3_stmt*,int iCol);
+ sqlite_int64 (*column_int64)(sqlite3_stmt*,int iCol);
+ const char * (*column_name)(sqlite3_stmt*,int);
+ const void * (*column_name16)(sqlite3_stmt*,int);
+ const char * (*column_origin_name)(sqlite3_stmt*,int);
+ const void * (*column_origin_name16)(sqlite3_stmt*,int);
+ const char * (*column_table_name)(sqlite3_stmt*,int);
+ const void * (*column_table_name16)(sqlite3_stmt*,int);
+ const unsigned char * (*column_text)(sqlite3_stmt*,int iCol);
+ const void * (*column_text16)(sqlite3_stmt*,int iCol);
+ int (*column_type)(sqlite3_stmt*,int iCol);
+ sqlite3_value* (*column_value)(sqlite3_stmt*,int iCol);
+ void * (*commit_hook)(sqlite3*,int(*)(void*),void*);
+ int (*complete)(const char*sql);
+ int (*complete16)(const void*sql);
+ int (*create_collation)(sqlite3*,const char*,int,void*,
+ int(*)(void*,int,const void*,int,const void*));
+ int (*create_collation16)(sqlite3*,const void*,int,void*,
+ int(*)(void*,int,const void*,int,const void*));
+ int (*create_function)(sqlite3*,const char*,int,int,void*,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+ void (*xFinal)(sqlite3_context*));
+ int (*create_function16)(sqlite3*,const void*,int,int,void*,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+ void (*xFinal)(sqlite3_context*));
+ int (*create_module)(sqlite3*,const char*,const sqlite3_module*,void*);
+ int (*data_count)(sqlite3_stmt*pStmt);
+ sqlite3 * (*db_handle)(sqlite3_stmt*);
+ int (*declare_vtab)(sqlite3*,const char*);
+ int (*enable_shared_cache)(int);
+ int (*errcode)(sqlite3*db);
+ const char * (*errmsg)(sqlite3*);
+ const void * (*errmsg16)(sqlite3*);
+ int (*exec)(sqlite3*,const char*,sqlite3_callback,void*,char**);
+ int (*expired)(sqlite3_stmt*);
+ int (*finalize)(sqlite3_stmt*pStmt);
+ void (*free)(void*);
+ void (*free_table)(char**result);
+ int (*get_autocommit)(sqlite3*);
+ void * (*get_auxdata)(sqlite3_context*,int);
+ int (*get_table)(sqlite3*,const char*,char***,int*,int*,char**);
+ int (*global_recover)(void);
+ void (*interruptx)(sqlite3*);
+ sqlite_int64 (*last_insert_rowid)(sqlite3*);
+ const char * (*libversion)(void);
+ int (*libversion_number)(void);
+ void *(*malloc)(int);
+ char * (*mprintf)(const char*,...);
+ int (*open)(const char*,sqlite3**);
+ int (*open16)(const void*,sqlite3**);
+ int (*prepare)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
+ int (*prepare16)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
+ void * (*profile)(sqlite3*,void(*)(void*,const char*,sqlite_uint64),void*);
+ void (*progress_handler)(sqlite3*,int,int(*)(void*),void*);
+ void *(*realloc)(void*,int);
+ int (*reset)(sqlite3_stmt*pStmt);
+ void (*result_blob)(sqlite3_context*,const void*,int,void(*)(void*));
+ void (*result_double)(sqlite3_context*,double);
+ void (*result_error)(sqlite3_context*,const char*,int);
+ void (*result_error16)(sqlite3_context*,const void*,int);
+ void (*result_int)(sqlite3_context*,int);
+ void (*result_int64)(sqlite3_context*,sqlite_int64);
+ void (*result_null)(sqlite3_context*);
+ void (*result_text)(sqlite3_context*,const char*,int,void(*)(void*));
+ void (*result_text16)(sqlite3_context*,const void*,int,void(*)(void*));
+ void (*result_text16be)(sqlite3_context*,const void*,int,void(*)(void*));
+ void (*result_text16le)(sqlite3_context*,const void*,int,void(*)(void*));
+ void (*result_value)(sqlite3_context*,sqlite3_value*);
+ void * (*rollback_hook)(sqlite3*,void(*)(void*),void*);
+ int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*,
+ const char*,const char*),void*);
+ void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*));
+ char * (*snprintf)(int,char*,const char*,...);
+ int (*step)(sqlite3_stmt*);
+ int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*,
+ char const**,char const**,int*,int*,int*);
+ void (*thread_cleanup)(void);
+ int (*total_changes)(sqlite3*);
+ void * (*trace)(sqlite3*,void(*xTrace)(void*,const char*),void*);
+ int (*transfer_bindings)(sqlite3_stmt*,sqlite3_stmt*);
+ void * (*update_hook)(sqlite3*,void(*)(void*,int ,char const*,char const*,
+ sqlite_int64),void*);
+ void * (*user_data)(sqlite3_context*);
+ const void * (*value_blob)(sqlite3_value*);
+ int (*value_bytes)(sqlite3_value*);
+ int (*value_bytes16)(sqlite3_value*);
+ double (*value_double)(sqlite3_value*);
+ int (*value_int)(sqlite3_value*);
+ sqlite_int64 (*value_int64)(sqlite3_value*);
+ int (*value_numeric_type)(sqlite3_value*);
+ const unsigned char * (*value_text)(sqlite3_value*);
+ const void * (*value_text16)(sqlite3_value*);
+ const void * (*value_text16be)(sqlite3_value*);
+ const void * (*value_text16le)(sqlite3_value*);
+ int (*value_type)(sqlite3_value*);
+ char *(*vmprintf)(const char*,va_list);
+ /* Added ??? */
+ int (*overload_function)(sqlite3*, const char *zFuncName, int nArg);
+ /* Added by 3.3.13 */
+ int (*prepare_v2)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
+ int (*prepare16_v2)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
+ int (*clear_bindings)(sqlite3_stmt*);
+ /* Added by 3.4.1 */
+ int (*create_module_v2)(sqlite3*,const char*,const sqlite3_module*,void*,
+ void (*xDestroy)(void *));
+ /* Added by 3.5.0 */
+ int (*bind_zeroblob)(sqlite3_stmt*,int,int);
+ int (*blob_bytes)(sqlite3_blob*);
+ int (*blob_close)(sqlite3_blob*);
+ int (*blob_open)(sqlite3*,const char*,const char*,const char*,sqlite3_int64,
+ int,sqlite3_blob**);
+ int (*blob_read)(sqlite3_blob*,void*,int,int);
+ int (*blob_write)(sqlite3_blob*,const void*,int,int);
+ int (*create_collation_v2)(sqlite3*,const char*,int,void*,
+ int(*)(void*,int,const void*,int,const void*),
+ void(*)(void*));
+ int (*file_control)(sqlite3*,const char*,int,void*);
+ sqlite3_int64 (*memory_highwater)(int);
+ sqlite3_int64 (*memory_used)(void);
+ sqlite3_mutex *(*mutex_alloc)(int);
+ void (*mutex_enter)(sqlite3_mutex*);
+ void (*mutex_free)(sqlite3_mutex*);
+ void (*mutex_leave)(sqlite3_mutex*);
+ int (*mutex_try)(sqlite3_mutex*);
+ int (*open_v2)(const char*,sqlite3**,int,const char*);
+ int (*release_memory)(int);
+ void (*result_error_nomem)(sqlite3_context*);
+ void (*result_error_toobig)(sqlite3_context*);
+ int (*sleep)(int);
+ void (*soft_heap_limit)(int);
+ sqlite3_vfs *(*vfs_find)(const char*);
+ int (*vfs_register)(sqlite3_vfs*,int);
+ int (*vfs_unregister)(sqlite3_vfs*);
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/Makefile.in
^
|
| @@ -0,0 +1,440 @@
+# Makefile.in --
+#
+# This file is a Makefile for Sample TEA Extension. If it has the name
+# "Makefile.in" then it is a template for a Makefile; to generate the
+# actual Makefile, run "./configure", which is a configuration script
+# generated by the "autoconf" program (constructs like "@foo@" will get
+# replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR = @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES = @PKG_SOURCES@
+PKG_OBJECTS = @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS = @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE = @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES = $(PKG_LIB_FILE)
+BINARIES = $(lib_BINARIES)
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+libdir = @libdir@
+datarootdir = @datarootdir@
+datadir = @datadir@
+mandir = @mandir@
+includedir = @includedir@
+
+DESTDIR =
+
+PKG_DIR = $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir = $(datadir)/$(PKG_DIR)
+pkglibdir = $(libdir)/$(PKG_DIR)
+pkgincludedir = $(includedir)/$(PKG_DIR)
+
+top_builddir = .
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+CC = @CC@
+CFLAGS_DEFAULT = @CFLAGS_DEFAULT@
+CFLAGS_WARNING = @CFLAGS_WARNING@
+CLEANFILES = @CLEANFILES@
+EXEEXT = @EXEEXT@
+LDFLAGS_DEFAULT = @LDFLAGS_DEFAULT@
+MAKE_LIB = @MAKE_LIB@
+MAKE_SHARED_LIB = @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB = @MAKE_STATIC_LIB@
+MAKE_STUB_LIB = @MAKE_STUB_LIB@
+OBJEXT = @OBJEXT@
+RANLIB = @RANLIB@
+RANLIB_STUB = @RANLIB_STUB@
+SHLIB_CFLAGS = @SHLIB_CFLAGS@
+SHLIB_LD = @SHLIB_LD@
+SHLIB_LD_LIBS = @SHLIB_LD_LIBS@
+STLIB_LD = @STLIB_LD@
+#TCL_DEFS = @TCL_DEFS@
+TCL_BIN_DIR = @TCL_BIN_DIR@
+TCL_SRC_DIR = @TCL_SRC_DIR@
+#TK_BIN_DIR = @TK_BIN_DIR@
+#TK_SRC_DIR = @TK_SRC_DIR@
+
+# This is no longer necessary even for packages that use private Tcl headers
+#TCL_TOP_DIR_NATIVE = @TCL_TOP_DIR_NATIVE@
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS = @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing. The other environment variables allow us
+# to test against an uninstalled Tcl. Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH = $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH = $(top_builddir)
+TCLSH_ENV = TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
+ @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+ PATH="$(EXTRA_PATH):$(PATH)" \
+ TCLLIBPATH="$(TCLLIBPATH)"
+# TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+
+TCLSH_PROG = @TCLSH_PROG@
+TCLSH = $(TCLSH_ENV) $(TCLSH_PROG)
+
+#WISH_PROG = @WISH_PROG@
+#WISH = $(TCLSH_ENV) $(WISH_PROG)
+
+
+SHARED_BUILD = @SHARED_BUILD@
+
+INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ -I$(srcdir)/..
+#INCLUDES = @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS = @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.in checks for the necessary components
+# that your library may use. TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS = $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS = @DEFS@ $(PKG_CFLAGS)
+
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+
+CPPFLAGS = @CPPFLAGS@
+LIBS = @PKG_LIBS@ @LIBS@
+AR = @AR@
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS. Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target inclues executable programs and
+# platform-dependent libraries. Modify these targets so that they install
+# the various pieces of your package. The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/README
^
|
| @@ -0,0 +1,36 @@
+This is the SQLite extension for Tcl using the Tcl Extension
+Architecture (TEA). For additional information on SQLite see
+
+ http://www.sqlite.org/
+
+
+UNIX BUILD
+==========
+
+Building under most UNIX systems is easy, just run the configure script
+and then run make. For more information about the build process, see
+the tcl/unix/README file in the Tcl src dist. The following minimal
+example will install the extension in the /opt/tcl directory.
+
+ $ cd sqlite-*-tea
+ $ ./configure --prefix=/opt/tcl
+ $ make
+ $ make install
+
+WINDOWS BUILD
+=============
+
+The recommended method to build extensions under windows is to use the
+Msys + Mingw build process. This provides a Unix-style build while
+generating native Windows binaries. Using the Msys + Mingw build tools
+means that you can use the same configure script as per the Unix build
+to create a Makefile. See the tcl/win/README file for the URL of
+the Msys + Mingw download.
+
+If you have VC++ then you may wish to use the files in the win
+subdirectory and build the extension using just VC++. These files have
+been designed to be as generic as possible but will require some
+additional maintenance by the project developer to synchronise with
+the TEA configure.in and Makefile.in files. Instructions for using the
+VC++ makefile are written in the first part of the Makefile.vc
+file.
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/aclocal.m4
^
|
| @@ -0,0 +1,9 @@
+#
+# Include the TEA standard macro set
+#
+
+builtin(include,tclconfig/tcl.m4)
+
+#
+# Add here whatever m4 macros you want to define for your package
+#
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/configure
^
|
| @@ -0,0 +1,9981 @@
+#! /bin/sh
+# Guess values for system-dependent variables and create Makefiles.
+# Generated by GNU Autoconf 2.69 for sqlite 3.8.11.1.
+#
+#
+# Copyright (C) 1992-1996, 1998-2012 Free Software Foundation, Inc.
+#
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+## -------------------- ##
+## M4sh Initialization. ##
+## -------------------- ##
+
+# Be more Bourne compatible
+DUALCASE=1; export DUALCASE # for MKS sh
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '${1+"$@"}'='"$@"'
+ setopt NO_GLOB_SUBST
+else
+ case `(set -o) 2>/dev/null` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+
+
+as_nl='
+'
+export as_nl
+# Printing a long string crashes Solaris 7 /usr/bin/printf.
+as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\'
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo
+as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo
+# Prefer a ksh shell builtin over an external printf program on Solaris,
+# but without wasting forks for bash or zsh.
+if test -z "$BASH_VERSION$ZSH_VERSION" \
+ && (test "X`print -r -- $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='print -r --'
+ as_echo_n='print -rn --'
+elif (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then
+ as_echo='printf %s\n'
+ as_echo_n='printf %s'
+else
+ if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then
+ as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"'
+ as_echo_n='/usr/ucb/echo -n'
+ else
+ as_echo_body='eval expr "X$1" : "X\\(.*\\)"'
+ as_echo_n_body='eval
+ arg=$1;
+ case $arg in #(
+ *"$as_nl"*)
+ expr "X$arg" : "X\\(.*\\)$as_nl";
+ arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;;
+ esac;
+ expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl"
+ '
+ export as_echo_n_body
+ as_echo_n='sh -c $as_echo_n_body as_echo'
+ fi
+ export as_echo_body
+ as_echo='sh -c $as_echo_body as_echo'
+fi
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+ PATH_SEPARATOR=:
+ (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && {
+ (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 ||
+ PATH_SEPARATOR=';'
+ }
+fi
+
+
+# IFS
+# We need space, tab and new line, in precisely that order. Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+IFS=" "" $as_nl"
+
+# Find who we are. Look in the path if we contain no directory separator.
+as_myself=
+case $0 in #((
+ *[\\/]* ) as_myself=$0 ;;
+ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+ IFS=$as_save_IFS
+ test -z "$as_dir" && as_dir=.
+ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+ done
+IFS=$as_save_IFS
+
+ ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+ as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+ $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+ exit 1
+fi
+
+# Unset variables that we do not need and which cause bugs (e.g. in
+# pre-3.0 UWIN ksh). But do not cause bugs in bash 2.01; the "|| exit 1"
+# suppresses any "Segmentation fault" message there. '((' could
+# trigger a bug in pdksh 5.2.14.
+for as_var in BASH_ENV ENV MAIL MAILPATH
+do eval test x\${$as_var+set} = xset \
+ && ( (unset $as_var) || exit 1) >/dev/null 2>&1 && unset $as_var || :
+done
+PS1='$ '
+PS2='> '
+PS4='+ '
+
+# NLS nuisances.
+LC_ALL=C
+export LC_ALL
+LANGUAGE=C
+export LANGUAGE
+
+# CDPATH.
+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+
+# Use a proper internal environment variable to ensure we don't fall
+ # into an infinite loop, continuously re-executing ourselves.
+ if test x"${_as_can_reexec}" != xno && test "x$CONFIG_SHELL" != x; then
+ _as_can_reexec=no; export _as_can_reexec;
+ # We cannot yet assume a decent shell, so we have to provide a
+# neutralization value for shells without unset; and this also
+# works around shells that cannot unset nonexistent variables.
+# Preserve -v and -x to the replacement shell.
+BASH_ENV=/dev/null
+ENV=/dev/null
+(unset BASH_ENV) >/dev/null 2>&1 && unset BASH_ENV ENV
+case $- in # ((((
+ *v*x* | *x*v* ) as_opts=-vx ;;
+ *v* ) as_opts=-v ;;
+ *x* ) as_opts=-x ;;
+ * ) as_opts= ;;
+esac
+exec $CONFIG_SHELL $as_opts "$as_myself" ${1+"$@"}
+# Admittedly, this is quite paranoid, since all the known shells bail
+# out after a failed `exec'.
+$as_echo "$0: could not re-execute with $CONFIG_SHELL" >&2
+as_fn_exit 255
+ fi
+ # We don't want this to propagate to other subprocesses.
+ { _as_can_reexec=; unset _as_can_reexec;}
+if test "x$CONFIG_SHELL" = x; then
+ as_bourne_compatible="if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then :
+ emulate sh
+ NULLCMD=:
+ # Pre-4.2 versions of Zsh do word splitting on \${1+\"\$@\"}, which
+ # is contrary to our usage. Disable this feature.
+ alias -g '\${1+\"\$@\"}'='\"\$@\"'
+ setopt NO_GLOB_SUBST
+else
+ case \`(set -o) 2>/dev/null\` in #(
+ *posix*) :
+ set -o posix ;; #(
+ *) :
+ ;;
+esac
+fi
+"
+ as_required="as_fn_return () { (exit \$1); }
+as_fn_success () { as_fn_return 0; }
+as_fn_failure () { as_fn_return 1; }
+as_fn_ret_success () { return 0; }
+as_fn_ret_failure () { return 1; }
+
+exitcode=0
+as_fn_success || { exitcode=1; echo as_fn_success failed.; }
+as_fn_failure && { exitcode=1; echo as_fn_failure succeeded.; }
+as_fn_ret_success || { exitcode=1; echo as_fn_ret_success failed.; }
+as_fn_ret_failure && { exitcode=1; echo as_fn_ret_failure succeeded.; }
+if ( set x; as_fn_ret_success y && test x = \"\$1\" ); then :
+
+else
+ exitcode=1; echo positional parameters were not saved.
+fi
+test x\$exitcode = x0 || exit 1
+test -x / || exit 1"
+ as_suggested=" as_lineno_1=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_1a=\$LINENO
+ as_lineno_2=";as_suggested=$as_suggested$LINENO;as_suggested=$as_suggested" as_lineno_2a=\$LINENO
+ eval 'test \"x\$as_lineno_1'\$as_run'\" != \"x\$as_lineno_2'\$as_run'\" &&
+ test \"x\`expr \$as_lineno_1'\$as_run' + 1\`\" = \"x\$as_lineno_2'\$as_run'\"' || exit 1
+test \$(( 1 + 1 )) = 2 || exit 1"
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/configure.ac
^
|
| @@ -0,0 +1,202 @@
+#!/bin/bash -norc
+dnl This file is an input file used by the GNU "autoconf" program to
+dnl generate the file "configure", which is run during Tcl installation
+dnl to configure the system for the local environment.
+#
+# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
+
+#-----------------------------------------------------------------------
+# Sample configure.in for Tcl Extensions. The only places you should
+# need to modify this file are marked by the string __CHANGE__
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Set your package name and version numbers here.
+#
+# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
+# set as provided. These will also be added as -D defs in your Makefile
+# so you can encode the package version directly into the source files.
+#-----------------------------------------------------------------------
+
+AC_INIT([sqlite], [3.8.11.1])
+
+#--------------------------------------------------------------------
+# Call TEA_INIT as the first TEA_ macro to set up initial vars.
+# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
+# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
+#--------------------------------------------------------------------
+
+TEA_INIT([3.9])
+
+AC_CONFIG_AUX_DIR(tclconfig)
+
+#--------------------------------------------------------------------
+# Load the tclConfig.sh file
+#--------------------------------------------------------------------
+
+TEA_PATH_TCLCONFIG
+TEA_LOAD_TCLCONFIG
+
+#--------------------------------------------------------------------
+# Load the tkConfig.sh file if necessary (Tk extension)
+#--------------------------------------------------------------------
+
+#TEA_PATH_TKCONFIG
+#TEA_LOAD_TKCONFIG
+
+#-----------------------------------------------------------------------
+# Handle the --prefix=... option by defaulting to what Tcl gave.
+# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
+#-----------------------------------------------------------------------
+
+TEA_PREFIX
+
+#-----------------------------------------------------------------------
+# Standard compiler checks.
+# This sets up CC by using the CC env var, or looks for gcc otherwise.
+# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
+# the basic setup necessary to compile executables.
+#-----------------------------------------------------------------------
+
+TEA_SETUP_COMPILER
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Specify the C source files to compile in TEA_ADD_SOURCES,
+# public headers that need to be installed in TEA_ADD_HEADERS,
+# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
+# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
+# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
+# and PKG_TCL_SOURCES.
+#-----------------------------------------------------------------------
+
+TEA_ADD_SOURCES([tclsqlite3.c])
+TEA_ADD_HEADERS([])
+TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
+TEA_ADD_LIBS([])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
+TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_RTREE=1])
+TEA_ADD_CFLAGS([-DSQLITE_OMIT_DEPRECATED=1])
+TEA_ADD_STUB_SOURCES([])
+TEA_ADD_TCL_SOURCES([])
+
+#--------------------------------------------------------------------
+# The --with-system-sqlite causes the TCL bindings to SQLite to use
+# the system shared library for SQLite rather than statically linking
+# against its own private copy. This is dangerous and leads to
+# undersirable dependences and is not recommended.
+# Patchs from rmax.
+#--------------------------------------------------------------------
+AC_ARG_WITH([system-sqlite],
+ [AC_HELP_STRING([--with-system-sqlite],
+ [use a system-supplied libsqlite3 instead of the bundled one])],
+ [], [with_system_sqlite=no])
+if test x$with_system_sqlite != xno; then
+ AC_CHECK_HEADER([sqlite3.h],
+ [AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
+ [AC_DEFINE(USE_SYSTEM_SQLITE)
+ LIBS="$LIBS -lsqlite3"])])
+fi
+
+#--------------------------------------------------------------------
+# __CHANGE__
+# Choose which headers you need. Extension authors should try very
+# hard to only rely on the Tcl public header files. Internal headers
+# contain private data structures and are subject to change without
+# notice.
+# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
+#--------------------------------------------------------------------
+
+TEA_PUBLIC_TCL_HEADERS
+#TEA_PRIVATE_TCL_HEADERS
+
+#TEA_PUBLIC_TK_HEADERS
+#TEA_PRIVATE_TK_HEADERS
+#TEA_PATH_X
+
+#--------------------------------------------------------------------
+# Check whether --enable-threads or --disable-threads was given.
+# This auto-enables if Tcl was compiled threaded.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_THREADS
+if test "${TCL_THREADS}" = "1" ; then
+ AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
+ # Not automatically added by Tcl because its assumed Tcl links to them,
+ # but it may not if it isn't really a threaded build.
+ TEA_ADD_LIBS([$THREADS_LIBS])
+else
+ AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
+fi
+
+#--------------------------------------------------------------------
+# The statement below defines a collection of symbols related to
+# building as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SHARED
+
+#--------------------------------------------------------------------
+# This macro figures out what flags to use with the compiler/linker
+# when building shared/static debug/optimized objects. This information
+# can be taken from the tclConfig.sh file, but this figures it all out.
+#--------------------------------------------------------------------
+
+TEA_CONFIG_CFLAGS
+
+#--------------------------------------------------------------------
+# Set the default compiler switches based on the --enable-symbols option.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SYMBOLS
+
+#--------------------------------------------------------------------
+# Everyone should be linking against the Tcl stub library. If you
+# can't for some reason, remove this definition. If you aren't using
+# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
+# link against the non-stubbed Tcl library. Add Tk too if necessary.
+#--------------------------------------------------------------------
+
+AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
+#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
+
+
+#--------------------------------------------------------------------
+# Redefine fdatasync as fsync on systems that lack fdatasync
+#--------------------------------------------------------------------
+#
+#AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
+# Check for library functions that SQLite can optionally use.
+AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
+
+AC_FUNC_STRERROR_R
+
+
+#--------------------------------------------------------------------
+# This macro generates a line to use when building a library. It
+# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
+# and TEA_LOAD_TCLCONFIG macros above.
+#--------------------------------------------------------------------
+
+TEA_MAKE_LIB
+
+#--------------------------------------------------------------------
+# Determine the name of the tclsh and/or wish executables in the
+# Tcl and Tk build directories or the location they were installed
+# into. These paths are used to support running test cases only,
+# the Makefile should not be making use of these paths to generate
+# a pkgIndex.tcl file or anything else at extension build time.
+#--------------------------------------------------------------------
+
+TEA_PROG_TCLSH
+#TEA_PROG_WISH
+
+#--------------------------------------------------------------------
+# Finally, substitute all of the various values into the Makefile.
+# You may alternatively have a special pkgIndex.tcl.in or other files
+# which require substituting th AC variables in. Include these here.
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/doc/sqlite3.n
^
|
| @@ -0,0 +1,15 @@
+.TH sqlite3 n 4.1 "Tcl-Extensions"
+.HS sqlite3 tcl
+.BS
+.SH NAME
+sqlite3 \- an interface to the SQLite3 database engine
+.SH SYNOPSIS
+\fBsqlite3\fI command_name ?filename?\fR
+.br
+.SH DESCRIPTION
+SQLite3 is a self-contains, zero-configuration, transactional SQL database
+engine. This extension provides an easy to use interface for accessing
+SQLite database files from Tcl.
+.PP
+For full documentation see \fIhttp://www.sqlite.org/\fR and
+in particular \fIhttp://www.sqlite.org/tclsqlite.html\fR.
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/generic/tclsqlite3.c
^
|
| @@ -0,0 +1,3902 @@
+#ifdef USE_SYSTEM_SQLITE
+# include <sqlite3.h>
+#else
+#include "sqlite3.c"
+#endif
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** A TCL Interface to SQLite. Append this file to sqlite3.c and
+** compile the whole thing to build a TCL-enabled version of SQLite.
+**
+** Compile-time options:
+**
+** -DTCLSH=1 Add a "main()" routine that works as a tclsh.
+**
+** -DSQLITE_TCLMD5 When used in conjuction with -DTCLSH=1, add
+** four new commands to the TCL interpreter for
+** generating MD5 checksums: md5, md5file,
+** md5-10x8, and md5file-10x8.
+**
+** -DSQLITE_TEST When used in conjuction with -DTCLSH=1, add
+** hundreds of new commands used for testing
+** SQLite. This option implies -DSQLITE_TCLMD5.
+*/
+
+/*
+** If requested, include the SQLite compiler options file for MSVC.
+*/
+#if defined(INCLUDE_MSVC_H)
+#include "msvc.h"
+#endif
+
+#include "tcl.h"
+#include <errno.h>
+
+/*
+** Some additional include files are needed if this file is not
+** appended to the amalgamation.
+*/
+#ifndef SQLITE_AMALGAMATION
+# include "sqlite3.h"
+# include <stdlib.h>
+# include <string.h>
+# include <assert.h>
+ typedef unsigned char u8;
+#endif
+#include <ctype.h>
+
+/* Used to get the current process ID */
+#if !defined(_WIN32)
+# include <unistd.h>
+# define GETPID getpid
+#elif !defined(_WIN32_WCE)
+# ifndef SQLITE_AMALGAMATION
+# define WIN32_LEAN_AND_MEAN
+# include <windows.h>
+# endif
+# define GETPID (int)GetCurrentProcessId
+#endif
+
+/*
+ * Windows needs to know which symbols to export. Unix does not.
+ * BUILD_sqlite should be undefined for Unix.
+ */
+#ifdef BUILD_sqlite
+#undef TCL_STORAGE_CLASS
+#define TCL_STORAGE_CLASS DLLEXPORT
+#endif /* BUILD_sqlite */
+
+#define NUM_PREPARED_STMTS 10
+#define MAX_PREPARED_STMTS 100
+
+/* Forward declaration */
+typedef struct SqliteDb SqliteDb;
+
+/*
+** New SQL functions can be created as TCL scripts. Each such function
+** is described by an instance of the following structure.
+*/
+typedef struct SqlFunc SqlFunc;
+struct SqlFunc {
+ Tcl_Interp *interp; /* The TCL interpret to execute the function */
+ Tcl_Obj *pScript; /* The Tcl_Obj representation of the script */
+ SqliteDb *pDb; /* Database connection that owns this function */
+ int useEvalObjv; /* True if it is safe to use Tcl_EvalObjv */
+ char *zName; /* Name of this function */
+ SqlFunc *pNext; /* Next function on the list of them all */
+};
+
+/*
+** New collation sequences function can be created as TCL scripts. Each such
+** function is described by an instance of the following structure.
+*/
+typedef struct SqlCollate SqlCollate;
+struct SqlCollate {
+ Tcl_Interp *interp; /* The TCL interpret to execute the function */
+ char *zScript; /* The script to be run */
+ SqlCollate *pNext; /* Next function on the list of them all */
+};
+
+/*
+** Prepared statements are cached for faster execution. Each prepared
+** statement is described by an instance of the following structure.
+*/
+typedef struct SqlPreparedStmt SqlPreparedStmt;
+struct SqlPreparedStmt {
+ SqlPreparedStmt *pNext; /* Next in linked list */
+ SqlPreparedStmt *pPrev; /* Previous on the list */
+ sqlite3_stmt *pStmt; /* The prepared statement */
+ int nSql; /* chars in zSql[] */
+ const char *zSql; /* Text of the SQL statement */
+ int nParm; /* Size of apParm array */
+ Tcl_Obj **apParm; /* Array of referenced object pointers */
+};
+
+typedef struct IncrblobChannel IncrblobChannel;
+
+/*
+** There is one instance of this structure for each SQLite database
+** that has been opened by the SQLite TCL interface.
+**
+** If this module is built with SQLITE_TEST defined (to create the SQLite
+** testfixture executable), then it may be configured to use either
+** sqlite3_prepare_v2() or sqlite3_prepare() to prepare SQL statements.
+** If SqliteDb.bLegacyPrepare is true, sqlite3_prepare() is used.
+*/
+struct SqliteDb {
+ sqlite3 *db; /* The "real" database structure. MUST BE FIRST */
+ Tcl_Interp *interp; /* The interpreter used for this database */
+ char *zBusy; /* The busy callback routine */
+ char *zCommit; /* The commit hook callback routine */
+ char *zTrace; /* The trace callback routine */
+ char *zProfile; /* The profile callback routine */
+ char *zProgress; /* The progress callback routine */
+ char *zAuth; /* The authorization callback routine */
+ int disableAuth; /* Disable the authorizer if it exists */
+ char *zNull; /* Text to substitute for an SQL NULL value */
+ SqlFunc *pFunc; /* List of SQL functions */
+ Tcl_Obj *pUpdateHook; /* Update hook script (if any) */
+ Tcl_Obj *pRollbackHook; /* Rollback hook script (if any) */
+ Tcl_Obj *pWalHook; /* WAL hook script (if any) */
+ Tcl_Obj *pUnlockNotify; /* Unlock notify script (if any) */
+ SqlCollate *pCollate; /* List of SQL collation functions */
+ int rc; /* Return code of most recent sqlite3_exec() */
+ Tcl_Obj *pCollateNeeded; /* Collation needed script */
+ SqlPreparedStmt *stmtList; /* List of prepared statements*/
+ SqlPreparedStmt *stmtLast; /* Last statement in the list */
+ int maxStmt; /* The next maximum number of stmtList */
+ int nStmt; /* Number of statements in stmtList */
+ IncrblobChannel *pIncrblob;/* Linked list of open incrblob channels */
+ int nStep, nSort, nIndex; /* Statistics for most recent operation */
+ int nTransaction; /* Number of nested [transaction] methods */
+#ifdef SQLITE_TEST
+ int bLegacyPrepare; /* True to use sqlite3_prepare() */
+#endif
+};
+
+struct IncrblobChannel {
+ sqlite3_blob *pBlob; /* sqlite3 blob handle */
+ SqliteDb *pDb; /* Associated database connection */
+ int iSeek; /* Current seek offset */
+ Tcl_Channel channel; /* Channel identifier */
+ IncrblobChannel *pNext; /* Linked list of all open incrblob channels */
+ IncrblobChannel *pPrev; /* Linked list of all open incrblob channels */
+};
+
+/*
+** Compute a string length that is limited to what can be stored in
+** lower 30 bits of a 32-bit signed integer.
+*/
+static int strlen30(const char *z){
+ const char *z2 = z;
+ while( *z2 ){ z2++; }
+ return 0x3fffffff & (int)(z2 - z);
+}
+
+
+#ifndef SQLITE_OMIT_INCRBLOB
+/*
+** Close all incrblob channels opened using database connection pDb.
+** This is called when shutting down the database connection.
+*/
+static void closeIncrblobChannels(SqliteDb *pDb){
+ IncrblobChannel *p;
+ IncrblobChannel *pNext;
+
+ for(p=pDb->pIncrblob; p; p=pNext){
+ pNext = p->pNext;
+
+ /* Note: Calling unregister here call Tcl_Close on the incrblob channel,
+ ** which deletes the IncrblobChannel structure at *p. So do not
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/license.terms
^
|
| @@ -0,0 +1,6 @@
+The author disclaims copyright to this source code. In place of
+a legal notice, here is a blessing:
+
+ May you do good and not evil.
+ May you find forgiveness for yourself and forgive others.
+ May you share freely, never taking more than you give.
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/pkgIndex.tcl.in
^
|
| @@ -0,0 +1,7 @@
+#
+# Tcl package index file
+#
+# Note sqlite*3* init specifically
+#
+package ifneeded sqlite3 @PACKAGE_VERSION@ \
+ [list load [file join $dir @PKG_LIB_FILE@] Sqlite3]
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/tclconfig/install-sh
^
|
| @@ -0,0 +1,528 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2011-04-20.01; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" "" $nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+ doit_exec=exec
+else
+ doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+ test "$posix_glob" != "?" || {
+ if (set -f) 2>/dev/null; then
+ posix_glob=
+ else
+ posix_glob=:
+ fi
+ }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+ or: $0 [OPTION]... SRCFILES... DIRECTORY
+ or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+ or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+ --help display this help and exit.
+ --version display version info and exit.
+
+ -c (ignored)
+ -C install only if different (preserve the last data modification time)
+ -d create directories instead of installing files.
+ -g GROUP $chgrpprog installed files to GROUP.
+ -m MODE $chmodprog installed files to MODE.
+ -o USER $chownprog installed files to USER.
+ -s $stripprog installed files.
+ -S $stripprog installed files.
+ -t DIRECTORY install into DIRECTORY.
+ -T report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+ CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+ RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+ case $1 in
+ -c) ;;
+
+ -C) copy_on_change=true;;
+
+ -d) dir_arg=true;;
+
+ -g) chgrpcmd="$chgrpprog $2"
+ shift;;
+
+ --help) echo "$usage"; exit $?;;
+
+ -m) mode=$2
+ case $mode in
+ *' '* | *' '* | *'
+'* | *'*'* | *'?'* | *'['*)
+ echo "$0: invalid mode: $mode" >&2
+ exit 1;;
+ esac
+ shift;;
+
+ -o) chowncmd="$chownprog $2"
+ shift;;
+
+ -s) stripcmd=$stripprog;;
+
+ -S) stripcmd="$stripprog $2"
+ shift;;
+
+ -t) dst_arg=$2
+ shift;;
+
+ -T) no_target_directory=true;;
+
+ --version) echo "$0 $scriptversion"; exit $?;;
+
+ --) shift
+ break;;
+
+ -*) echo "$0: invalid option: $1" >&2
+ exit 1;;
+
+ *) break;;
+ esac
+ shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+ # When -d is used, all remaining arguments are directories to create.
+ # When -t is used, the destination is already specified.
+ # Otherwise, the last argument is the destination. Remove it from $@.
+ for arg
+ do
+ if test -n "$dst_arg"; then
+ # $@ is not empty: it contains at least $arg.
+ set fnord "$@" "$dst_arg"
+ shift # fnord
+ fi
+ shift # arg
+ dst_arg=$arg
+ done
+fi
+
+if test $# -eq 0; then
+ if test -z "$dir_arg"; then
+ echo "$0: no input file specified." >&2
+ exit 1
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/tclconfig/tcl.m4
^
|
| @@ -0,0 +1,4168 @@
+# tcl.m4 --
+#
+# This file provides a set of autoconf macros to help TEA-enable
+# a Tcl extension.
+#
+# Copyright (c) 1999-2000 Ajuba Solutions.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+
+AC_PREREQ(2.57)
+
+dnl TEA extensions pass us the version of TEA they think they
+dnl are compatible with (must be set in TEA_INIT below)
+dnl TEA_VERSION="3.9"
+
+# Possible values for key variables defined:
+#
+# TEA_WINDOWINGSYSTEM - win32 aqua x11 (mirrors 'tk windowingsystem')
+# TEA_PLATFORM - windows unix
+#
+
+#------------------------------------------------------------------------
+# TEA_PATH_TCLCONFIG --
+#
+# Locate the tclConfig.sh file and perform a sanity check on
+# the Tcl compile flags
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-tcl=...
+#
+# Defines the following vars:
+# TCL_BIN_DIR Full path to the directory containing
+# the tclConfig.sh file
+#------------------------------------------------------------------------
+
+AC_DEFUN([TEA_PATH_TCLCONFIG], [
+ dnl TEA specific: Make sure we are initialized
+ AC_REQUIRE([TEA_INIT])
+ #
+ # Ok, lets find the tcl configuration
+ # First, look for one uninstalled.
+ # the alternative search directory is invoked by --with-tcl
+ #
+
+ if test x"${no_tcl}" = x ; then
+ # we reset no_tcl in case something fails here
+ no_tcl=true
+ AC_ARG_WITH(tcl,
+ AC_HELP_STRING([--with-tcl],
+ [directory containing tcl configuration (tclConfig.sh)]),
+ with_tclconfig="${withval}")
+ AC_MSG_CHECKING([for Tcl configuration])
+ AC_CACHE_VAL(ac_cv_c_tclconfig,[
+
+ # First check to see if --with-tcl was specified.
+ if test x"${with_tclconfig}" != x ; then
+ case "${with_tclconfig}" in
+ */tclConfig.sh )
+ if test -f "${with_tclconfig}"; then
+ AC_MSG_WARN([--with-tcl argument should refer to directory containing tclConfig.sh, not to tclConfig.sh itself])
+ with_tclconfig="`echo "${with_tclconfig}" | sed 's!/tclConfig\.sh$!!'`"
+ fi ;;
+ esac
+ if test -f "${with_tclconfig}/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd "${with_tclconfig}"; pwd)`"
+ else
+ AC_MSG_ERROR([${with_tclconfig} directory doesn't contain tclConfig.sh])
+ fi
+ fi
+
+ # then check for a private Tcl installation
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ../tcl \
+ `ls -dr ../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../tcl \
+ `ls -dr ../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../tcl[[8-9]].[[0-9]]* 2>/dev/null` \
+ ../../../tcl \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ../../../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # on Darwin, check in Framework installation locations
+ if test "`uname -s`" = "Darwin" -a x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ~/Library/Frameworks 2>/dev/null` \
+ `ls -d /Library/Frameworks 2>/dev/null` \
+ `ls -d /Network/Library/Frameworks 2>/dev/null` \
+ `ls -d /System/Library/Frameworks 2>/dev/null` \
+ ; do
+ if test -f "$i/Tcl.framework/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/Tcl.framework; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # TEA specific: on Windows, check in common installation locations
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d C:/Tcl/lib 2>/dev/null` \
+ `ls -d C:/Progra~1/Tcl/lib 2>/dev/null` \
+ ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few common install locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in `ls -d ${libdir} 2>/dev/null` \
+ `ls -d ${exec_prefix}/lib 2>/dev/null` \
+ `ls -d ${prefix}/lib 2>/dev/null` \
+ `ls -d /usr/local/lib 2>/dev/null` \
+ `ls -d /usr/contrib/lib 2>/dev/null` \
+ `ls -d /usr/lib 2>/dev/null` \
+ `ls -d /usr/lib64 2>/dev/null` \
+ `ls -d /usr/lib/tcl8.6 2>/dev/null` \
+ `ls -d /usr/lib/tcl8.5 2>/dev/null` \
+ ; do
+ if test -f "$i/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i; pwd)`"
+ break
+ fi
+ done
+ fi
+
+ # check in a few other private locations
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ for i in \
+ ${srcdir}/../tcl \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]].[[0-9]]* 2>/dev/null` \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]] 2>/dev/null` \
+ `ls -dr ${srcdir}/../tcl[[8-9]].[[0-9]]* 2>/dev/null` ; do
+ if test "${TEA_PLATFORM}" = "windows" \
+ -a -f "$i/win/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/win; pwd)`"
+ break
+ fi
+ if test -f "$i/unix/tclConfig.sh" ; then
+ ac_cv_c_tclconfig="`(cd $i/unix; pwd)`"
+ break
+ fi
+ done
+ fi
+ ])
+
+ if test x"${ac_cv_c_tclconfig}" = x ; then
+ TCL_BIN_DIR="# no Tcl configs found"
+ AC_MSG_ERROR([Can't find Tcl configuration definitions. Use --with-tcl to specify a directory containing tclConfig.sh])
+ else
+ no_tcl=
+ TCL_BIN_DIR="${ac_cv_c_tclconfig}"
+ AC_MSG_RESULT([found ${TCL_BIN_DIR}/tclConfig.sh])
+ fi
+ fi
+])
+
+#------------------------------------------------------------------------
+# TEA_PATH_TKCONFIG --
+#
+# Locate the tkConfig.sh file
+#
+# Arguments:
+# none
+#
+# Results:
+#
+# Adds the following arguments to configure:
+# --with-tk=...
+#
+# Defines the following vars:
+# TK_BIN_DIR Full path to the directory containing
+# the tkConfig.sh file
+#------------------------------------------------------------------------
+
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/win/makefile.vc
^
|
| @@ -0,0 +1,414 @@
+# makefile.vc -- -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
+#-------------------------------------------------------------------------
+
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCINSTALLDIR) && !defined(MSSDK) && !defined(WINDOWSSDKDIR)
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment. Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1) It is now necessary to have %MSVCDir% set in the environment. This is
+# used as a check to see if vcvars32.bat had been run prior to running
+# nmake or during the installation of Microsoft Visual C++, MSVCDir had
+# been set globally and the PATH adjusted. Either way is valid.
+#
+# You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+# directory to setup the proper environment, if needed, for your current
+# setup. This is a needed bootstrap requirement and allows the swapping of
+# different environments to be easier.
+#
+# 2) To use the Platform SDK (not expressly needed), run setenv.bat after
+# vcvars32.bat according to the instructions for it. This can also turn on
+# the 64-bit compiler, if your SDK has it.
+#
+# 3) Targets are:
+# all -- Builds everything.
+# <project> -- Builds the project (eg: nmake sample)
+# test -- Builds and runs the test suite.
+# install -- Installs the built binaries and libraries to $(INSTALLDIR)
+# in an appropriate subdirectory.
+# clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4) Macros usable on the commandline:
+# INSTALLDIR=<path>
+# Sets where to install Tcl from the built binaries.
+# C:\Progra~1\Tcl is assumed when not specified.
+#
+# OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+# Sets special options for the core. The default is for none.
+# Any combination of the above may be used (comma separated).
+# 'none' will over-ride everything to nothing.
+#
+# static = Builds a static library of the core instead of a
+# dll. The shell will be static (and large), as well.
+# msvcrt = Effects the static option only to switch it from
+# using libcmt(d) as the C runtime [by default] to
+# msvcrt(d). This is useful for static embedding
+# support.
+# staticpkg = Effects the static option only to switch
+# tclshXX.exe to have the dde and reg extension linked
+# inside it.
+# threads = Turns on full multithreading support.
+# thrdalloc = Use the thread allocator (shared global free pool).
+# symbols = Adds symbols for step debugging.
+# profile = Adds profiling hooks. Map file is assumed.
+# loimpact = Adds a flag for how NT treats the heap to keep memory
+# in use, low. This is said to impact alloc performance.
+#
+# STATS=memdbg,compdbg,none
+# Sets optional memory and bytecode compiler debugging code added
+# to the core. The default is for none. Any combination of the
+# above may be used (comma separated). 'none' will over-ride
+# everything to nothing.
+#
+# memdbg = Enables the debugging memory allocator.
+# compdbg = Enables byte compilation logging.
+#
+# MACHINE=(IX86|IA64|ALPHA)
+# Set the machine type used for the compiler, linker, and
+# resource compiler. This hook is needed to tell the tools
+# when alternate platforms are requested. IX86 is the default
+# when not specified.
+#
+# TMP_DIR=<path>
+# OUT_DIR=<path>
+# Hooks to allow the intermediate and output directories to be
+# changed. $(OUT_DIR) is assumed to be
+# $(BINROOT)\(Release|Debug) based on if symbols are requested.
+# $(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+# TESTPAT=<file>
+# Reads the tests requested to be run from this file.
+#
+# CFG_ENCODING=encoding
+# name of encoding for configuration information. Defaults
+# to cp1252
+#
+# 5) Examples:
+#
+# Basic syntax of calling nmake looks like this:
+# nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+# Standard (no frills)
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>nmake -f makefile.vc all
+# c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+# Building for Win64
+# c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+# Setting environment for using Microsoft Visual C++ tools.
+# c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+# Targeting Windows pre64 RETAIL
+# c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = sqlite3
+!include "rules.vc"
+
+# nmakehelp -V <file> <tag> will search the file for tag, skips until a
+# number and returns all character until a character not in [0-9.ab]
+# is read.
+
+!if [echo REM = This file is generated from Makefile.vc > versions.vc]
+!endif
+# get project version from row "AC_INIT([sqlite], [3.7.14])"
+!if [echo DOTVERSION = \>> versions.vc] \
+ && [nmakehlp -V ..\configure.in AC_INIT >> versions.vc]
+!endif
+!include "versions.vc"
+
+VERSION = $(DOTVERSION:.=)
+STUBPREFIX = $(PROJECT)stub
+
+DLLOBJS = \
+ $(TMP_DIR)\tclsqlite3.obj
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT = .
+ROOT = ..
+
+PRJIMPLIB = $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME = $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB = $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME = $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB = $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR = $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR = $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/win/nmakehlp.c
^
|
| @@ -0,0 +1,694 @@
+/*
+ * ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ * This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2006 by Pat Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution of
+ * this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ * ----------------------------------------------------------------------------
+ */
+
+#define _CRT_SECURE_NO_DEPRECATE
+#include <windows.h>
+#define NO_SHLWAPI_GDI
+#define NO_SHLWAPI_STREAM
+#define NO_SHLWAPI_REG
+#include <shlwapi.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+#pragma comment (lib, "shlwapi.lib")
+#include <stdio.h>
+#include <math.h>
+
+/*
+ * This library is required for x64 builds with _some_ versions of MSVC
+ */
+#if defined(_M_IA64) || defined(_M_AMD64)
+#if _MSC_VER >= 1400 && _MSC_VER < 1500
+#pragma comment(lib, "bufferoverflowU")
+#endif
+#endif
+
+/* ISO hack for dumb VC++ */
+#ifdef _MSC_VER
+#define snprintf _snprintf
+#endif
+
+
+
+/* protos */
+
+static int CheckForCompilerFeature(const char *option);
+static int CheckForLinkerFeature(const char *option);
+static int IsIn(const char *string, const char *substring);
+static int SubstituteFile(const char *substs, const char *filename);
+static int QualifyPath(const char *path);
+static const char *GetVersionFromFile(const char *filename, const char *match);
+static DWORD WINAPI ReadFromPipe(LPVOID args);
+
+/* globals */
+
+#define CHUNK 25
+#define STATICBUFFERSIZE 1000
+typedef struct {
+ HANDLE pipe;
+ char buffer[STATICBUFFERSIZE];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+
+/*
+ * exitcodes: 0 == no, 1 == yes, 2 == error
+ */
+
+int
+main(
+ int argc,
+ char *argv[])
+{
+ char msg[300];
+ DWORD dwWritten;
+ int chars;
+
+ /*
+ * Make sure children (cl.exe and link.exe) are kept quiet.
+ */
+
+ SetErrorMode(SEM_FAILCRITICALERRORS | SEM_NOOPENFILEERRORBOX);
+
+ /*
+ * Make sure the compiler and linker aren't effected by the outside world.
+ */
+
+ SetEnvironmentVariable("CL", "");
+ SetEnvironmentVariable("LINK", "");
+
+ if (argc > 1 && *argv[1] == '-') {
+ switch (*(argv[1]+1)) {
+ case 'c':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c <compiler option>\n"
+ "Tests for whether cl.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForCompilerFeature(argv[2]);
+ case 'l':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -l <linker option>\n"
+ "Tests for whether link.exe supports an option\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return CheckForLinkerFeature(argv[2]);
+ case 'f':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -f <string> <substring>\n"
+ "Find a substring within another\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ } else if (argc == 3) {
+ /*
+ * If the string is blank, there is no match.
+ */
+
+ return 0;
+ } else {
+ return IsIn(argv[2], argv[3]);
+ }
+ case 's':
+ if (argc == 2) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -s <substitutions file> <file>\n"
+ "Perform a set of string map type substutitions on a file\n"
+ "exitcodes: 0\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return SubstituteFile(argv[2], argv[3]);
+ case 'V':
+ if (argc != 4) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -V filename matchstring\n"
+ "Extract a version from a file:\n"
+ "eg: pkgIndex.tcl \"package ifneeded http\"",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 0;
+ }
+ printf("%s\n", GetVersionFromFile(argv[2], argv[3]));
+ return 0;
+ case 'Q':
+ if (argc != 3) {
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -Q path\n"
+ "Emit the fully qualified path\n"
+ "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars,
+ &dwWritten, NULL);
+ return 2;
+ }
+ return QualifyPath(argv[2]);
+ }
+ }
+ chars = snprintf(msg, sizeof(msg) - 1,
+ "usage: %s -c|-f|-l|-Q|-s|-V ...\n"
+ "This is a little helper app to equalize shell differences between WinNT and\n"
+ "Win9x and get nmake.exe to accomplish its job.\n",
+ argv[0]);
+ WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+ return 2;
+}
+
+static int
+CheckForCompilerFeature(
+ const char *option)
+{
+ STARTUPINFO si;
+ PROCESS_INFORMATION pi;
+ SECURITY_ATTRIBUTES sa;
+ DWORD threadID;
+ char msg[300];
+ BOOL ok;
+ HANDLE hProcess, h, pipeThreads[2];
+ char cmdline[100];
+
+ hProcess = GetCurrentProcess();
+
+ ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+ ZeroMemory(&si, sizeof(STARTUPINFO));
+ si.cb = sizeof(STARTUPINFO);
+ si.dwFlags = STARTF_USESTDHANDLES;
+ si.hStdInput = INVALID_HANDLE_VALUE;
|
|
[-]
[+]
|
Added |
_service:tar_git:sqlite-3.8.11.1.tar.gz/tea/win/rules.vc
^
|
| @@ -0,0 +1,711 @@
+#------------------------------------------------------------------------------
+# rules.vc --
+#
+# Microsoft Visual C++ makefile include for decoding the commandline
+# macros. This file does not need editing to build Tcl.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# Copyright (c) 2001-2003 David Gravereaux.
+# Copyright (c) 2003-2008 Patrick Thoyts
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32 = $(CC) # built-in default.
+link32 = link
+lib32 = lib
+rc32 = $(RC) # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR = C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR = $(INSTALLDIR:/=\)
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR = rmdir /S /Q
+ERRNULL = 2>NUL
+!if ![ver | find "4.0" > nul]
+CPY = echo y | xcopy /i >NUL
+COPY = copy >NUL
+!else
+CPY = xcopy /i /y >NUL
+COPY = copy /y >NUL
+!endif
+!else # "$(OS)" != "Windows_NT"
+CPY = xcopy /i >_JUNK.OUT # On Win98 NUL does not work here.
+COPY = copy >_JUNK.OUT # On Win98 NUL does not work here.
+RMDIR = deltree /Y
+NULL = \NUL # Used in testing directory existence
+ERRNULL = >NUL # Win9x shell cannot redirect stderr
+!endif
+MKDIR = mkdir
+
+#------------------------------------------------------------------------------
+# Determine the host and target architectures and compiler version.
+#------------------------------------------------------------------------------
+
+_HASH=^#
+_VC_MANIFEST_EMBED_EXE=
+_VC_MANIFEST_EMBED_DLL=
+VCVER=0
+!if ![echo VCVERSION=_MSC_VER > vercl.x] \
+ && ![echo $(_HASH)if defined(_M_IX86) >> vercl.x] \
+ && ![echo ARCH=IX86 >> vercl.x] \
+ && ![echo $(_HASH)elif defined(_M_AMD64) >> vercl.x] \
+ && ![echo ARCH=AMD64 >> vercl.x] \
+ && ![echo $(_HASH)endif >> vercl.x] \
+ && ![cl -nologo -TC -P vercl.x $(ERRNULL)]
+!include vercl.i
+!if ![echo VCVER= ^\> vercl.vc] \
+ && ![set /a $(VCVERSION) / 100 - 6 >> vercl.vc]
+!include vercl.vc
+!endif
+!endif
+!if ![del $(ERRNUL) /q/f vercl.x vercl.i vercl.vc]
+!endif
+
+!if ![reg query HKLM\Hardware\Description\System\CentralProcessor\0 /v Identifier | findstr /i x86]
+NATIVE_ARCH=IX86
+!else
+NATIVE_ARCH=AMD64
+!endif
+
+# Since MSVC8 we must deal with manifest resources.
+!if $(VCVERSION) >= 1400
+_VC_MANIFEST_EMBED_EXE=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;1
+_VC_MANIFEST_EMBED_DLL=if exist $@.manifest mt -nologo -manifest $@.manifest -outputresource:$@;2
+!endif
+
+!ifndef MACHINE
+MACHINE=$(ARCH)
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING = \"cp1252\"
+!endif
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Ot]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING = 1
+!else
+!message *** Compiler does not have 'Optimizations'
+OPTIMIZING = 0
+!endif
+
+OPTIMIZATIONS =
+
+!if [nmakehlp -c -Ot]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Ot
+!endif
+
+!if [nmakehlp -c -Oi]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Oi
+!endif
+
+!if [nmakehlp -c -Op]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Op
+!endif
+
+!if [nmakehlp -c -fp:strict]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -fp:strict
+!endif
+
+!if [nmakehlp -c -Gs]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -Gs
+!endif
+
+!if [nmakehlp -c -GS]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GS
+!endif
+
+!if [nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -GL
+!endif
+
+DEBUGFLAGS =
+
+!if [nmakehlp -c -RTC1]
+DEBUGFLAGS = $(DEBUGFLAGS) -RTC1
+!elseif [nmakehlp -c -GZ]
+DEBUGFLAGS = $(DEBUGFLAGS) -GZ
+!endif
+
+COMPILERFLAGS =-W3 -DUNICODE -D_UNICODE
+
+# In v13 -GL and -YX are incompatible.
+!if [nmakehlp -c -YX]
+!if ![nmakehlp -c -GL]
+OPTIMIZATIONS = $(OPTIMIZATIONS) -YX
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+COMPILERFLAGS = $(COMPILERFLAGS) -QI0f
+!else
+!message *** Compiler does not have 'Pentium 0x0f fix'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+COMPILERFLAGS = $(COMPILERFLAGS) -QIA64_Bx
+!else
+!message *** Compiler does not have 'B-stepping errata workarounds'
+!endif
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK = 1
+!else
+!message *** Linker does not have 'Win98 alignment problem'
+ALIGN98_HACK = 0
+!endif
|
