[-]
[+]
|
Changed |
_service:tar_git:nemo-configs-n950-n9.changes
|
|
[-]
[+]
|
Changed |
_service:tar_git:nemo-configs-n950-n9.spec
^
|
|
[-]
[+]
|
Changed |
_service
^
|
@@ -2,7 +2,7 @@
<service name="tar_git">
<param name="url">https://github.com/nemomobile/nemo-configs-n950-n9.git</param>
<param name="branch">master</param>
- <param name="revision">1e62a478b74a62c40d22e4fdc982183cbb83840b</param>
+ <param name="revision">73de4bdf7c8f4b17ff5e42119345cde459d4edc8</param>
<param name="token"/>
<param name="debian"/>
<param name="dumb"/>
|
[-]
[+]
|
Changed |
_service:tar_git:nemo-configs-n950-n9-0.0.12.tar.bz2/Makefile
^
|
@@ -6,3 +6,4 @@
install -D -m 644 conf/powervr.ini $(DESTDIR)/etc/powervr.ini
install -D -m 644 prjconf/n950-n9-prjconf.xml $(DESTDIR)/usr/share/prjconf/n950-n9-prjconf.xml
install -D -m 644 conf/plugins.conf $(DESTDIR)/var/lib/environment/ofono/plugins.conf
+ install -D -m 644 conf/camera-pipelines.conf $(DESTDIR)/etc/camera/pipelines.conf
|
[-]
[+]
|
Added |
_service:tar_git:nemo-configs-n950-n9-0.0.12.tar.bz2/conf/camera-pipelines.conf
^
|
@@ -0,0 +1,71 @@
+#
+# ISP pipeline configuration file for subdevsrc and mcsrc elements.
+#
+# Recognized settings:
+# "max_resizer_factor:" defines resizer's max scaling factor (type: float)
+# "width_modulo:" tells how preview/capture width should be rounded (type: int)
+# "height_modulo:" tells how preview/capture height should be rounded (type: int)
+# "primary:" defines the primary camera device pipeline
+# "primary_continuous:" defines the primary camera pipeline for continuous shooting
+# "secondary:" defines secondary camera device pipeline
+#
+# Pipeline definition utilities:
+# "OUT_FORMAT" is mapped to output color format selected by application
+# "OUT_SIZE" is mapped to output resolution
+# "V4L2_MBUS_FMT_*" forces the color format
+# "POOL" connects two pipeline segments together with a buffer pool
+# "CAPTUREPOOL" works like POOL and is used for continuous shooting pipelines
+#
+# Each pipeline definition should start with sensor entity and end to video output node.
+# The separator character used in pipeline declarations is exclamation mark (!).
+# Pipeline definitions *must* also contain "OUT_FORMAT" keyword, since that is used for
+# determining the entity where output pixel formats should be queried.
+#
+# When pipeline definition contains a mem-to-mem segment, it must be connected by
+# using a POOL. Mem-to-mem segment means a pipeline section where frames are read
+# out from pipeline through an "output" entity and pushed back to ISP pipeline by using
+# an "input" entity. POOL must be always present between output and input entities to
+# ensure a proper buffer passing service between them.
+#
+# Continuous shooting pipeline must contain a CAPTUREPOOL definition. It defines the
+# pool which is used for image capturing in continuous shooting mode.
+#
+# The encoding of this file must be ISO-8859-1.
+
+# Keyword mappings. These are used to simplify pipeline definitions and
+# to automate sensor selection. When multiple entries are found with same keyword,
+# subdevsrc will try them one after another, until functional entity is found.
+
+main = jt8ev1
+main = smiapp-001
+main = smiapp-002
+main = smiapp-003
+main = smiapp-004
+vga = tcm8500md
+vga = vw6558
+csi2 = OMAP3 ISP CSI2a
+csi2_out = OMAP3 ISP CSI2a output
+ccp2 = OMAP3 ISP CCP2
+ccp2_in = OMAP3 ISP CCP2 input
+ccdc = OMAP3 ISP CCDC
+prev = OMAP3 ISP preview
+prev_out = OMAP3 ISP preview output
+rsz_in = OMAP3 ISP resizer input
+rsz = OMAP3 ISP resizer
+rsz_out = OMAP3 ISP resizer output
+
+# Settings
+max_resizer_factor: 4.0
+width_modulo: 16
+height_modulo: 16
+
+# Primary camera pipeline
+primary: main ! csi2 ! V4L2_MBUS_FMT_SGRBG10_1X10 ! ccdc ! prev ! OUT_FORMAT ! rsz ! OUT_SIZE ! rsz_out
+
+# Primary camera pipeline for continuous shooting
+primary_continuous: main ! csi2 ! V4L2_MBUS_FMT_SGRBG10_1X10 ! ccdc ! prev ! OUT_FORMAT ! prev_out ! CAPTUREPOOL ! rsz_in ! rsz ! OUT_SIZE ! rsz_out
+#primary_continuous: main ! csi2 ! V4L2_MBUS_FMT_SGRBG10_1X10 ! csi2_out ! POOL ! ccp2_in ! ccp2 ! ccdc ! prev ! OUT_FORMAT ! prev_out ! CAPTUREPOOL ! rsz_in ! rsz ! OUT_SIZE ! rsz_out
+
+# Secondary camera pipeline
+secondary: vga ! ccp2 ! ccdc ! prev ! OUT_FORMAT ! rsz ! OUT_SIZE ! rsz_out
+
|